Abstract:Nanoparticles of iron carbides and nitrides enclosed in graphite shells were obtained at 2 ÷ 8 GPa pressures and temperatures of around 800 °C from ferrocene and ferrocene-melamine mixture. The average core-shell particle size was below 60 nm. The graphite-like shells over the iron nitride cores were built of concentric graphene layers packed in a rhombohedral shape. It was found that at a pressure of 4 GPa and temperature of 800 °C, the stability of the nanoscale phases increases in a Fe7C3 -> Fe3C -> Fe3N1+x sequence and at 8 GPa in a Fe3C -> Fe7C3 -> Fe3N1+x sequence. At pressures of 2 ÷ 8 GPa and temperatures up to 1600 °C, iron nitride Fe3N1+x is more stable than iron carbides. At 8 GPa and 1600 °C, the average particle size of iron nitride increased to 0.5 ÷ 1 μm, while simultaneously formed free carbon particles had the shape of graphite discs with a size of 1 ÷ 2 μm. Structural refinement of the iron nitride using the Rietveld method gave the best result for the space group P6322. The refined composition of the samples obtained from a mixture of ferrocene and melamine at 8 GPa/800 °C corresponded to Fe3N1.208, and at 8 GPa/1650 °C to Fe3N1.259. The iron nitride core-shell nanoparticles exhibited magnetic behavior. Specific magnetization at 7.5 kOe of pure Fe3N1.208 was estimated to be 70 emu/g. Compared to other methods, the high-pressure method allows easy synthesis of the iron nitride cores inside pure carbon shells and control of the particle size. And in general, pressure is a good tool for modifying the phase and chemical composition of the iron-containing cores.

The M(o)ssbauer Investigation in Iron Nitride/expanded Graphite

Enhanced GMI Effect in Fe 73.5-X Mn X Si 13.5 B 9 Nb 3 Cu 1 ( X =1,3,5) Nanocomposites Due to Mn Substitution for Fe

A Mössbauer Investigation of Nano-Nife Alloy/expanded Graphite for Electromagnetic Shielding

Magnetic phase transitions and magnetic properties of nd3(fe, mo)29 compound and its nitride

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Nitriding and Martensitic Phase Transformation of the Copper and Boron Doped Iron Nitride Magnet

Preparation and Magnetic Properties of Nanoscale Ɛ-Fe3n Particles.

Nanostructured iron-nitrogen martensite synthesized from Fe79Mo10B10Cu1 magnetic nanocomposite alloy

A Mössbauer Study of Iron/polytetrafluoroethylene Nanocomposites Prepared by High-Energy Ball Milling

Fe 57 Mössbauer Study of the Interstitial Nitrogen Atom Effects of NdFe10.5V1.5Nx

Preparation of CNTs-supported Fe3O4 and Fe3C Nano-particles and the Investigation on their Magnetic Properties

Mossbauer Investigation Of Fe-Ni Fine Particles

Nanocrystalline iron-based alloys investigated by Mössbauer spectrometry

Magnetic Properties and Thermal Stability of Nanocrystalline Ε-Fe3n Prepared by Gas Reduction-Nitriding Method

Growth, structural, and magnetic properties of iron nitride thin films deposited by dc magnetron sputtering

Preparation and magnetic properties of iron oxide and carbide nanoparticles in carbon nanotube matrix

Preparation of composite of Fe nanoparticle and expanded graphite by liquid reduction for electromagnetic shielding radiation

X-ray Diffraction and Mössbauer Studies of Phase Transformation in Manganese Ferrite Prepared by Combustion Synthesis Method

Magnetic Properties and Thermal Stability of Γ′-Fe4n Nanoparticles Prepared by a Combined Method of Reduction and Nitriding

Neutron Diffraction Study of the Structural and Magnetic Properties of Ε-Fe3n1.098 and Ε-Fe2.322co0.678n0.888

Magnetic Nanoparticles with Fe-N and Fe-C Cores and Carbon Shells Synthesized at High Pressures