Abstract:A SiC whisker reinforced pure aluminum composite (SiCw/Al) was fabricated using a squeeze casting route and cold-rolled to 50% reduction in thickness. Some cold-rolled composites were then annealed at 500 °C for 1 h. The pure aluminum was also cold-rolled and annealed in the above way for comparison purpose. The textures of the cold-rolled and annealed materials were examined using XRD technique. It was found that the dominant texture components in the cold-rolled composites consisted of {112}〈111〉, {100}〈011〉 and {123}〈634〉. They were much weaker than those in the cold-rolled aluminum. When the cold-rolled composites were annealed, the new texture components {211}〈213〉, {013}〈131〉 and {011}〈211〉 occurred and had the similar intensity as the texture components remained from the deformation state. This indicated that the recovery reaction and recrystallization occurred simultaneously when the cold-rolled composite was annealed 1 h at 500 °C. Like the situation of the deformed materials, the annealing texture was also much weaker in the composite than in the aluminum. The weaker deformation and annealing textures in the composites can be attributed to the introduction of the whiskers.

Effect of annealing treatment on the stress corrosion cracking behavior of SiC whisker reinforced aluminum composite

Effect of annealing treatment on stress corrosion cracking behavior of SiC whisker reinforced aluminum composite

Effect of whisker orientation on the stress corrosion cracking behavior of alumina borate whisker reinforced pure Al composite

EFFECTS OF HEAT TREATMENT ON THE THERMAL EXPANSION BEHAVIOR OF SiC WHISKER REINFORCED ALUMINUM COMPOSITE

EFFECT OF AGEING ON STRESS CORROSION CRACKING BEHAVIOR OF SiCw/2024Al COMPOSITE

The Effect of Annealing Temperature on Micro-Structure and Mechanical Properties of C/Sic Composites

Effect of heat treatment on dislocation states and work hardening behaviors of SiCw/6061Al composite

The effect of whisker misalignment on the hot compressive deformation behavior of SiCw/6061 Al composites at 500°C

A STUDY ON STRENGTHENING BEHAVORS OF ALUMNIUM MATRIX COMPOSITES REINFORCED WITH CARBON SILLICON WHISKER

Investigation of high-temperature deformation behavior of a SiC whisker reinforced 6061 aluminium composite

High temperature crack healing of Al2O3-matrix composites

Rolling and annealing textures of a SiCw/Al composite

Thermal expansion and thermal mismatch stress relaxation behaviors of SiC whisker reinforced aluminum composite

Effect of Heat Treatment on Microstructure and Corrosion Resistance of SiCp/Al 2124 Composite

The relaxation behavior of thermal stress in a SiCw/Al composite

Effect of Cold-Rolling on Hardness of SiCw/Al Composite

Effect of the Heat Treatment Process on the Properties of SiCp/AL Composites

Rolling and Annealing Textures of SiCw/Al Composite

STUDY ON THE RELATIONSHIP BETWEEN THERMAL EXPANSION BEHAVIOR AND INTERNAL STRESSES OF AN SiC WHISKER REINFORCED COMPOSITE

Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of Sic/Al Composites

The Effect of Residual Stress on Whisker Reinforcements in SiCw-Al2O3 Composites During Cooling