Abstract:Monte Carlo simulation codes that model particle interactions with matter, including GEANT4, can be used to support the development of novel X-ray tubes and instruments for applications in industry and research. Based on our knowledge, simulations of the output of transmission-geometry X-ray tubes have not yet been conducted in GEANT4. Simulations of reflection-geometry tubes are scarce, with a limited number of studies investigating the capability and accuracy of GEANT4 in this domain. Therefore, the aim of this work is to benchmark GEANT4 for the characterisation of X-ray tubes with industry applications, using for the first time a range of X-ray tubes geometries and high voltages. In this work, GEANT4 is benchmarked against experimental measurements performed at the Commonwealth Scientific and Industrial Research Organisation (CSIRO), Australia, with both transmission and reflection X-ray tubes. High voltages between 17 kV and 42.5 kV for tungsten, molybdenum, gold, and silver targets are investigated. The measurements have been performed with a MXR packaged X-ray tube (reflection) and Magnum X-ray tubes (transmission) and a fast silicon drift detector (SDD). Our study shows that GEANT4 predicts the bremsstrahlung continuum output of transmission and reflection X-ray tubes, in agreement with the experimental measurements. The Penelope physics models, distributed with GEANT4, and the GEANT4 X-ray fluorescence data libraries ANSTO HF, based on the Hartree-Fock approach, exhibit the best agreement against experimental measurements. Depending on the high voltage, target and X-ray line agreement was found to vary between 10% and 300%. Differences between GEANT4 and experimental data are more significant for lower voltage X-ray tube measurements and are most likely due to limitations in the ionization electron cross-section and/or atomic relaxation data libraries used. As next steps, it is recommended to validate GEANT4 against other, independent experimental measurements to corroborate the results of this work. In addition, it would be useful to repeat the same study with other general purpose Monte Carlo codes for radiation physics to compare their capability against GEANT4 in this application domain.

Radioactive decay simulation with Geant4: experimental benchmarks and developments for X-ray astronomy applications

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

Benchmarking Geant4 for Simulating Galactic Cosmic Ray Interactions Within Planetary Bodies

Comparing the output of measured and GEANT4 simulated X-ray tubes

Nuclear fragmentation reactions in extended media studied with Geant4 toolkit

Geant4 Simulation of Detection Efficiency and Self-Attenuation Effect of Β Particles for Radioxenon Measurement Using Β−γ Coincidence Equipment

Validation of Geant4 simulation of electron energy deposition

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Validation of Geant4 Physics Models for Nuclear Beams in Extended Media

Gamma Spectrum and Coincidence Summation Simulations with Geant4 in the Analysis of Radionuclide Using BEGe Detector.

Recent developments in Geant4

Benchmarking Geant4 photonuclear process model for the photo-induced reaction of deformed nuclei in the GDR region

Simulating neutron transport in long beamlines at a spallation neutron source using Geant4

G4CASCADE: A data-driven implementation of (n, $γ$) cascades in Geant4

Benchmarking geant4 nuclear models for hadron therapy with 95 MeV/nucleon carbon ions

Geant4 simulations of the lead fluoride calorimeter

Radioxenon beta-gamma coincidence efficiency for a SAUNA detector by Geant4 simulation

Modeling the relativistic runaway electron avalanche and the feedback mechanism with GEANT4

Geant4 model validation of Compton suppressed system for process monitoring of spent fuel

Experimental Evaluation of the Geant4-calculated Response Functions of a Bonner Sphere Spectrometer on Monoenergetic Neutron Sources

Experimental decay-heat simulation-benchmark for 14 MeV neutrons & complex inventory analysis with FISPACT-II