Bond-order Potential of Ti

DAI Yun-ya,YANG Li,ZU Xiao-tao

DOI: https://doi.org/10.3969/j.issn.1674-5248.2011.02.008

2011-01-01

Abstract:An analytical bond-order potential of hexagonal close-packed(hcp) Ti is developed to use the conjugate gradient least-squares minimization algorithm.The structural stability of Ti is tested to use molecular dynamics method and the result is in good agreement with the experimental information.

What problem does this paper attempt to address?

Theoretical Investigation of the High Pressure Structure, Lattice Dynamics, Phase Transition, and Thermal Equation of State of Titanium Metal

Cui-E Hu,Zhao-Yi Zeng,Lin Zhang,Xiang-Rong Chen,Ling-Cang Cai,Dario Alfe

DOI: https://doi.org/10.1063/1.3407560

IF: 2.877

2010-01-01

Journal of Applied Physics

Abstract:We report a detailed first-principles calculation to investigate the structures, elastic constants, and phase transition of Ti. The axial ratios of both alpha-Ti and omega-Ti are nearly constant under hydrostatic compression, which confirms the latest experimental results. From the high pressure elastic constants, we find that the alpha-Ti is unstable when the applied pressures are larger than 24.2 GPa, but the omega-Ti is mechanically stable at all range of calculated pressure. The calculated phonon dispersion curves agree well with experiments. Under compression, we captured a large softening around Gamma point of alpha-Ti. When the pressure is raised to 35.9 GPa, the frequencies around the Gamma point along Gamma-M-K and Gamma-A in transverse acoustical branches become imaginary, indicating a structural instability. Within quasiharmonic approximation, we obtained the full phase diagram and accurate thermal equations of state of Ti. The phase transition omega-Ti ->alpha-Ti ->beta-Ti at zero pressure occurs at 146 K and 1143 K, respectively. The predicted triple point is at 9.78 GPa, 931 K, which is close to the experimental data. Our thermal equations of state confirm the available experimental results and are extended to a wider pressure and temperature range. (C) 2010 American Institute of Physics. [doi:10.1063/1.3407560]
Phase transitions in titanium with an analytic bond-order potential

Alberto Ferrari,Malte Schröder,Yury Lysogorskiy,Jutta Rogal,Matous Mrovec,Ralf Drautz

DOI: https://doi.org/10.1088/1361-651X/ab471d

2019-05-03

Abstract:Titanium is the base material for a number of technologically important alloys for energy conversion and structural applications. Atomic-scale studies of Ti-based metals employing first-principles methods, such as density functional theory, are limited to ensembles of a few hundred atoms. To perform large-scale and/or finite temperature simulations, computationally more efficient interatomic potentials are required. In this work, we coarse grain the tight-binding (TB) approximation to the electronic structure and develop an analytic bond-order potential (BOP) for Ti by fitting to the energies and forces of elementary deformations of simple structures. The BOP predicts the structural properties of the stable and defective phases of Ti with a quality comparable to previous TB parametrizations at a much lower computational cost. The predictive power of the model is demonstrated for simulations of martensitic transformations.

Materials Science
First-principles Study of the Stability of the Icosahedralti13,ti13

Shan-Ying Wang,Wenhui Duan,Dongliang Zhao,Chong-Yu Wang

DOI: https://doi.org/10.1103/physrevb.65.165424

2002-01-01

Abstract:DMol cluster method based on density-functional theory has been used to study the structural stability of icosahedral ${\mathrm{Ti}}_{13},$ ${\mathrm{Ti}}_{13}^{\ensuremath{-}1},$ and ${\mathrm{Ti}}_{13}^{+1}$ clusters. The calculated results show that ${\mathrm{Ti}}_{13},$ ${\mathrm{Ti}}_{13}^{\ensuremath{-}1},$ and ${\mathrm{Ti}}_{13}^{+1}$ clusters favor a ${\mathrm{D}}_{3d}$ structure due to Jahn-Teller effect. However, for neutral ${\mathrm{Ti}}_{13}$ and positively charged ${\mathrm{Ti}}_{13}^{+1}$ clusters, the binding energies of the ${\mathrm{I}}_{h}$ and ${\mathrm{D}}_{5d}$ structures are quite close to that of the ${\mathrm{D}}_{3d}$ structure. The small distortion from the icosahedron in the ${\mathrm{D}}_{3d}$ structure is consistent with the prediction from the collision-induced dissociation experiment on positively charged ${\mathrm{Ti}}_{13}^{+1}$ cluster. The structural distortion in the charged clusters and the bonding feature in the neutral icosahedral ${\mathrm{Ti}}_{13}$ cluster are discussed. In addition, all the clusters in the present study are found to be magnetic and show small magnetic moments.
Analytical Bond-Order Potential for Hcp-Y

Kai-min Fan,Li Yang,Jing Tang,Qing-qiang Sun,Yun-ya Dai,Shu-ming Peng,Xiao-song zhou,Xiao-tao Zu

DOI: https://doi.org/10.1063/1674-0068/26/05/526-532

IF: 1.09

2013-01-01

Chinese Journal of Chemical Physics

Abstract:The lattice parameters, elastic constants, cohesive energy, structural energy differences, as well as the properties of point defects and planar defects of hexagonal close-packed yttrium (hcp-Y) have been studied with ab initio density functional theory for constructing an extensive database. Based on an analytical bond-order potential scheme, empirical many-body interatomic potential for hcp-Y has been developed. The model is fitted to some properties of Y, e.g., the lattice parameters, elastic constants, bulk modulus, cohesive energy, vacancy formation energy, and the structural energy differences. The present potential has ability to reproduce defect properties including the self-interstitial atoms formation energies, vacancy formation energy, divacancy binding energy, as well as the bulk properties and the thermal dynamic properties.
First-principles study of the stability of the icosahedral and clusters

Shan-Ying Wang,Wenhui Duan,Dong-Liang Zhao,Chong-Yu Wang

IF: 3.7

2002-01-01

Physical Review B

Abstract:DMol cluster method based on density-functional theory has been used to study the structural stability of icosahedral Ti 13, Ti 13− 1, and Ti 13+ 1 clusters. The calculated results show that Ti 13, Ti 13− 1, and Ti 13+ 1 clusters favor a D 3 d structure due to Jahn-Teller effect. However, for neutral Ti 13 and positively charged Ti 13+ 1 clusters, the binding energies of the I h and D 5 d structures are quite close to that of the D 3 d structure. The small distortion from the icosahedron in the D 3 d structure is consistent with the prediction from the collision-induced dissociation experiment on positively charged Ti 13+ 1 cluster. The structural distortion in the charged clusters and the bonding feature in the neutral icosahedral Ti 13 cluster are discussed. In addition, all the clusters in the present study are found to be magnetic and show small magnetic moments.
A Density-Functional Study of Small Titanium Clusters

SH Wei,Z Zeng,JQ You,XH Yan,XG Gong

DOI: https://doi.org/10.1063/1.1319646

IF: 4.304

2000-01-01

The Journal of Chemical Physics

Abstract:The atomic structures and electronic properties of small Ti-N (N=2-10) clusters have been studied by using the density-functional theory with a local spin density approximation. We find that the inner-shells (3s3p) of the titanium atom plays an important role in the formation of the small clusters. We have obtained the ground state of titanium clusters, Ti-7 is found to be a magic cluster, which is in good agreement with the experimental results. Starting with Ti-8 cluster some features of the electronic structure of the titanium bulk have been developed. The ionization potentials and magnetic moments for these small titanium clusters are also presented. (C) 2000 American Institute of Physics. [S0021- 9606(00)30544-X].
Electronic and bonding properties of TiB2

Yanfeng Han,Yongbing Dai,Da Shu,Jun Wang,Baode Sun

DOI: https://doi.org/10.1016/j.jallcom.2006.08.056

IF: 6.2

2007-01-01

Journal of Alloys and Compounds

Abstract:The structural and electronic properties of TiB2 have been calculated using the first-principles total-energy pseudopotential method based on density functional theory. It is shown that the calculated lattice constants and heat of formation of TiB2 are in good agreement with the experimental results. By analyzing the band structure, density of states and Mulliken population, it is found that the bonding nature in TiB2 is a combination of ionic, covalent and metallic. The 2s–2p interaction exists in the close-packed layer of boron atoms. The hybridization of Ti-3d and B-2p from different layers is the main reason for the creation of pseudogap and results in the strong interlayer covalent bonding. In the same time, the charge transfer from titanium to boron is as significant as 1.16 electrons in the present case. The d–d resonance and free-electron 3d states of titanium atoms contribute to the covalent and metallic bonding in the layer of titanium atoms.
Structure, elastic and bonding properties of hcp ZrxTi1-x binary alloy from first-principles calculations

Hou Songjun,Lei Huaping,Huang Sunchao,Zeng Zhi

DOI: https://doi.org/10.48550/arXiv.1512.06408

2015-12-21

Abstract:First principles calculations were performed to study the structural, elastic, and bonding properties of hcp ZrxTi1-x binary alloy. The special quasi- random structure (SQS) method is employed to mimic the random hcp ZrxTi1-x alloy. It is found that Bulk modulus, B, Young's modulus, E, and shear modulus, G, exhibit decreasing trends as increasing the amount of Zr. A ductile behavior ZrxTi1-x is predicted in the whole composition range. In terms of Mulliken charge analisis, we found that the element Ti behaves much more electronegative than Zr in hcp ZrxTi1-x alloy, and the charge transfer of an atom is approximately linear to the amount of other element atom surrounding it.

Computational Physics,Materials Science
Reinterpretation of bond-valence model with bond-order formalism: an improved bond-valence based interatomic potential for PbTiO$_3$

Shi Liu,Ilya Grinberg,Hiroyuki Takenaka,Andrew M. Rappe

DOI: https://doi.org/10.1103/PhysRevB.88.104102

2013-07-17

Abstract:We present a modified bond-valence model of PbTiO$_3$ based on the principles of bond-valence and bond-valence vector conservation. The relationship between the bond-valence model and the bond-order potential is derived analytically in the framework of a tight-binding model. A new energy term, bond-valence vector energy, is introduced into the atomistic model and the potential parameters are re-optimized. The new model potential can be applied both to canonical ensemble ($NVT$) and isobaric-isothermal ensemble ($NPT$) molecular dynamics (MD) simulations. This model reproduces the experimental phase transition in $NVT$ MD simulations and also exhibits the experimental sequence of temperature-driven and pressure-driven phase transitions in $NPT$ simulations. We expect that this improved bond-valence model can be applied to a broad range of inorganic materials.

Materials Science,Computational Physics
Pressure-Induced Reversible Hcp to Fcc Phase Transition of Ti: A First-Principles Study

Yongmei Zhang,Yuhong Zhao,Hua Hou,Zhiqin Wen,Feng Yan,Meiling Duan

DOI: https://doi.org/10.1166/sam.2019.3504

2019-01-01

Science of Advanced Materials

Abstract:The structural evolution of Ti under high pressure up to 200 GPa at 0 K has been investigated by first-principles calculations based on the density functional theory. A reversible hcp to fcc phase transition of Ti at 0 K under pressure is observed. The phase transitions hcp -> fcc and fcc -> hcp occur at P similar to 81.4 GPa and similar to 133.0 GPa, respectively. Accompanied by a reversible phase transition, the axial ratio (c/a) of hcp-Ti changes from similar to 1.65 to similar to 1.91, the c axial has negative compressibility, and a axial has positive compressibility, while the change of volume is continuous. The abrupt change of hcp-Ti structure and the electron transfer behavior similar to that of fcc-Ti under pressure may promote the phase transition of hcp-Ti to fcc-Ti. The analysis of DOS indicates the fcc structure is relatively stable compared with the hcp structure at P = 90 GPa. The high pressure limit of elastic stability for fcc-Ti is similar to 90 GPa. The weak bonding between atoms under high pressure explains the structure instability of fcc-Ti.
Analytical Bond-Order Potential for Sn

An Rong,Liu Wei,Wang Chun-Qing,Tian Yan-Hong

DOI: https://doi.org/10.7498/aps.62.128101

IF: 0.906

2013-01-01

Acta Physica Sinica

Abstract:An analytical bond-order potential based on Tersoff-Brenner model for Sn is developed using the Levenberg-Marquardt optimization algorithm with the first-principles calculations on fundamental physical properties of five configurations of Sn, and with the available experimental results. The potential is used to determine the crystal structures, binding energies, bond distances and strengths, and bulk modulus of the β-Sn and body-centered-tetragonal Sn, and to predict the changes in free energy of the α and β phase with temperature. Result indicate that the calculated basic properties of the phases and the predicted transition temperature from α to β phase are in good agreement with the reported experimental data. The proposed interatomic potential is short-ranged and quickly evaluated, and it could be used to distinguish covalent bond from metallic bond in the phases, so it is very useful for large-scale molecular dynamics simulations of Sn-based solder.
A theoretical investigation on the Ti ð H 2 O Þ 0 ; 1 þ n ð n 1⁄4 1 – 5 Þ clusters by density functional theory methods

Ju-Guang Han,J. A. Morales

2006-01-01

Abstract:The first systematic study of the TiðH2OÞ n ðn 1⁄4 1–5Þ series of clusters is herein presented at the level of the DFT B3LYP method in conjunction with electron core potential basis sets. The investigated structures are relevant for laser-induced and laser-ablation syntheses of titanium compounds, and also for fundamental spectroscopy studies of metal-bearing species in the gas phase. Calculated properties include optimal geometries, total energies, bond lengths, bond angles, natural orbital population analysis charges, and hydration dissociation energies inter alia. Present results reveal a strict correlation between the clusters total energy and their spin state. Without exception, the most stable neutral (cation) clusters TiðH2OÞ 1–5 1⁄2TiðH2OÞ 1þ 1–5 are those with spin state S = 1 (S = 3/2). Comparisons with a few available theoretical results show good agreement. 2005 Elsevier B.V. All rights reserved.
Geometric and Electronic Properties of Titanium Clusters Studied by Ultrasoft Pseudopotential

Jijun Zhao,Qi Qiu,Baolin Wang,Jinlan Wang,Guanghou Wang

DOI: https://doi.org/10.1016/s0038-1098(01)00044-8

IF: 1.934

2001-01-01

Solid State Communications

Abstract:The structural and electronic properties of titanium clusters are studied by the plane-wave ultrasoft pseudopotential method with the generalized gradient approximation. The equilibrium geometries Tin (n=2–14, 19, 55) clusters are determined by optimizing the bond length of various structural isomers under a symmetric constraint. Pentagonal growth patterns are found for small Tin clusters and the theoretical binding energies are in reasonable agreement with experimental results on Tin+. The electron density of state of Tin clusters shows a rapid convergency towards bulk bands, which agrees with the photoelectron spectra of Ti clusters.
The atomistic mechanism of hcp-to-bcc martensitic transformation in the Ti-Nb system revealed by molecular dynamics simulations.

Yang Li,JiaHao Li,BaiXin Liu

DOI: https://doi.org/10.1039/c4cp04894f

IF: 3.3

2015-01-01

Physical Chemistry Chemical Physics

Abstract:Applying the constructed Ti-Nb potentials, molecular dynamics simulations were conducted to investigate the martensitic transformation of Ti100-xNbx alloys (x = 5, 10...25) from the alpha' phase (hcp) to the beta phase (bcc). It is found that the transformation involved four phases, i.e. alpha', alpha ", fco (face-centered orthorhombic), and b phases. The structures of the obtained phases exhibit consistency with experimental data, verifying the validity of atomic simulations. The simulations not only revealed the processes of atomic displacements during the transformation, but also elucidated the underlying mechanism of the martensitic transformation at the atomic level. The martensitic transformation incorporates three types of coinstantaneous deformations i.e. slide, shear as well as extension, and the subsequent lattice constant relaxation. Furthermore, according to the proposed mechanism, the crystallographic correlation between the initial alpha' phase and the final beta phase has been deduced. The simulation results provide a clear landscape on the martensitic transformation mechanism, facilitating our comprehensive understanding on the phase transition in the Ti-Nb system.
Crystal structure and physical properties of Ti2B5 predicted by first principles calculations

Gangtai Zhang,Yunmei Song,Tingting Bai,Meng Zhang,Ting Liu

DOI: https://doi.org/10.1016/j.commatsci.2023.112379

IF: 3.572

2023-09-01

Computational Materials Science

Abstract:Applying the advanced CALYPSO structure searching method and first principles calculations, we predict a novel superhard structure for Ti2B5, which belongs to the monoclinic C2/m space group. The previously known Hf2B5, W2B5, and δ-V2O5-type structures are also selected as the potential structures for Ti2B5. It is shown that the predicted C2/m structure is the most stable phase among these considered structures within the range of 0-100GPa. The calculations of the phonon dispersion and elastic constants affirm that the predicted C2/m phase is dynamically and mechanically stable. The predicted high shear modulus (249 GPa) and large hardness (46.9 GPa) show that it should be anunderlying superhard material. In addition, the elastic anisotropy of Ti2B5 is also explored by investigating the directional dependence of the Young's modulus, shear modulus, and Poisson's ratio as well as some well anisotropy indices. The particular analyses of the density of states and electron charge density distribution verify that the strong B-B and Ti-B covalent bonds in the predicted C2/m-Ti2B5 phase playan importantpartin its hardness and structural stability.

materials science, multidisciplinary
Ab initio study of the bonding and elastic properties of Ti2CdC

Yuelei Bai,Xiaodong He,Mingwei Li,Yue Sun,Chuncheng Zhu,Yibin Li

DOI: https://doi.org/10.1016/j.solidstatesciences.2009.10.019

IF: 3.752

2010-01-01

Solid State Sciences

Abstract:The chemical bonding and elastic properties of Ti2CdC were investigated by means of a first-principles pseudopotential total energy method. The calculated results for the lattice constants and internal coordinate agree with experimental values very well. Ti2CdC is conducting, and the Cd-d states have little effect on the chemical bonding. The elastic properties were estimated from the individual elastic constants by Voigt approximation. The calculated shear-modulus of Ti2CdC, 70GPa, is the lowest value among all MAX phases. The lower shear-modulus and shear-modulus-to-bulk-modulus ratio are related to the weaker Ti–Cd bond, which indicates the lower coefficient of friction. This suggests that Ti2CdC would be a potential electrical frictional material.
A Molecular Dynamics Study of an Hcp-To-Fco Martensitic Transformation and Its Crystallographic Correlation in A Ti Lattice, Upon Dissolution of Cu Atoms

Bo Qin,Wen Sheng Lai

DOI: https://doi.org/10.1143/jpsj.79.104601

2010-01-01

Journal of the Physical Society of Japan

Abstract:A hexagonal close-packed to face-centered orthorhombic (hcp-to-fco) transformation in a Ti lattice, upon dissolution of Cu atoms, is observed by molecular dynamics simulations based on a proven realistic many-body Cu-Ti potential. It was found that the phase transformation takes place through two main simultaneous actions, i.e., lattice elongation along the < 2 (1) over bar(1) over bar0 > close-packed directions and relative movement or slide between adjacent close-packed planes along the < 01 (1) over bar0 > directions. By analyzing the crystallographic relationship between the hcp, bcc (body-centered cubic), and fco structures, it is proposed that the phase transformation occurs through a reverse mechanism, for the body-centered cubic to hexagonal closed-packed (bcc-to-hcp) phase transformation, together with lattice constant adjustments.
Atomistic Modelling of All Dislocations and Twins in HCP and BCC Ti

Tongqi Wen,Anwen Liu,Rui Wang,Linfeng Zhang,Jiawei Han,Han Wang,David J. Srolovitz,Zhaoxuan Wu

DOI: https://doi.org/10.48550/arxiv.2211.14072

2022-01-01

Abstract:Ti exhibits complex plastic deformation controlled by active dislocation and twinning systems. Understandings on dislocation cores and twin interfaces are currently not complete or quantitative, despite extensive experimental and simulation studies. Here, we determine all the core and twin interface properties in both HCP and BCC Ti using a Deep Potential (DP) and DFT. We determine the core structures, critical resolved shear stresses and mobilities of , , dislocations in HCP and <111>/2 dislocations in BCC Ti. The slip consists of slow core migration on pyramidal-I planes and fast migration on prism-planes, and is kinetically limited by cross-slips among them. This behaviour is consistent with "locking-unlocking" phenomena in TEM and is likely an intrinsic property. Large-scale DFT calculations provide a peek at the screw core and glide behaviour, which is further quantified using DP-Ti. The screw is unstable on pyramidal-II planes. The mixed is nearly sessile on pyramidal-I planes, consistent with observations of long dislocations in this orientation. The edge and mixed are unstable against a pyramidal-to-basal (PB) transition and become sessile at high temperatures, corroborate the difficulties in -axis compression of Ti. Finally, in BCC Ti, the <111>/2 screw has a degenerate core with average glide on {112} planes; the <111>/2 edge and mixed dislocations have non-dissociated cores on {110} planes. This work paints a self-consistent, complete picture on all dislocations in Ti, rationalises previous experimental observations and points to future HRTEM examinations of unusual dislocations such as the mixed and PB transformed cores.
Ti-Ti Bonding in γ-TiAl and f.c.c. Ti

Y. Song,S. P. Tang,J. H. Xu,O. N. Mryasov,A. J. Freeman,C. Woodward,D. M. Dimiduk

DOI: https://doi.org/10.1080/01418639408240267

2006-01-01

Abstract:The flow and fracture of high-temperature intermetallic alloys is strongly influenced by the propagation and cross-slip of ordinary and super dislocations. One factor associated with the poor ductility of TiAl is an apparently large Peierls stress, or lattice friction stress for the glide of ordinary (1/2[110]) dislocations. This Peierls relief is intimately related to the underlying crystal and electronic structure of TiAl, and specific bonding states have been identified by some investigators as contributing to the pinning of dislocations along certain line directions. In this study we qualify the relative strength of these bonds using several complementary electronic structure methods. Aspects of the electronic structure, equilibrium lattice constants and bond energies of gamma-TiAl are compared with hypothetical f.c.c. Ti as obtained by the full-potential linearized augmented-plane-wave (FLAPW) method, the DMol molecular cluster method and the linear muffin-tin orbital (LMTO) Green function (GF) method. Pair energies, bond occupations of Ti-Ti and Ti-Al bonds in L1(0) TiAl and f.c.c. Ti are calculated using the LMTO GF method. Comparing the d(xy) bonding states for these two crystal structure, we find the in-plane directional d-d bonding between Ti atoms on the (001) plane are strengthened in TiAl relative to f.c.c. Ti. These observations suggest that the alternating (001) planes of Al and Ti atoms presented in TiAl enhance these bonding states. Conversely, transition-metal ternary additions substituted on the Al sites in TiAl are expected to weaken these bonding states. Using the FLAPW method, we examine the changes in charge density in the Ti(001) planes when Mn atoms are substituted on Al sites in TiAl. Finally, LMTO GF methods are used to study the effect of Mn substitutional point defects on the Ti(001) d(xy) bonding states.
Theoretical Studies on TiP+ 6 and Ti2P+ 6 Binary Clusters

Gebo Pan,Jikang Feng,Aimin Ren,ChunYing Han,Zhen Gao

2002-01-01

Abstract:The possible geometrical structures and relative stability of titanium/phosphorus binary clusters of TiP+ 6 and Ti2P+ 6 are explored by means of density functional theory(DFT) quantum chemical calculations The effects of polarization functions and electron correlation are included in these calculations. The results show that the most stable structures of TiP+ 6 and Ti2P+ 6 belong to the C3v and D6h point group respectively. Our forecast to the properties of the clusters is in good agreement with the experimental results.

Bond-order Potential of Ti

Theoretical Investigation of the High Pressure Structure, Lattice Dynamics, Phase Transition, and Thermal Equation of State of Titanium Metal

Phase transitions in titanium with an analytic bond-order potential

First-principles Study of the Stability of the Icosahedralti13,ti13

Analytical Bond-Order Potential for Hcp-Y

First-principles study of the stability of the icosahedral and clusters

A Density-Functional Study of Small Titanium Clusters

Electronic and bonding properties of TiB2

Structure, elastic and bonding properties of hcp ZrxTi1-x binary alloy from first-principles calculations

Reinterpretation of bond-valence model with bond-order formalism: an improved bond-valence based interatomic potential for PbTiO$_3$

Pressure-Induced Reversible Hcp to Fcc Phase Transition of Ti: A First-Principles Study

Analytical Bond-Order Potential for Sn

A theoretical investigation on the Ti ð H 2 O Þ 0 ; 1 þ n ð n 1⁄4 1 – 5 Þ clusters by density functional theory methods

Geometric and Electronic Properties of Titanium Clusters Studied by Ultrasoft Pseudopotential

The atomistic mechanism of hcp-to-bcc martensitic transformation in the Ti-Nb system revealed by molecular dynamics simulations.

Crystal structure and physical properties of Ti2B5 predicted by first principles calculations

Ab initio study of the bonding and elastic properties of Ti2CdC

A Molecular Dynamics Study of an Hcp-To-Fco Martensitic Transformation and Its Crystallographic Correlation in A Ti Lattice, Upon Dissolution of Cu Atoms

Atomistic Modelling of All Dislocations and Twins in HCP and BCC Ti

Ti-Ti Bonding in γ-TiAl and f.c.c. Ti

Theoretical Studies on TiP+ 6 and Ti2P+ 6 Binary Clusters