Abstract:This study aims to develop an amendment to the design guidelines for the outer port facilities based on quantitative indexes to address harsh wave conditions due to climate change. To this end, the author first looked into the in situ data of damage to outer port facilities collected in about a dozen major ports in Korea, where the outer port facility has failed in fulfilling its intended disaster prevention against typhoons over the last decade. In doing so, the design fidelity index, a quantitative index that can rationally determine the scope of reinforcement of outer port facilities, was developed based on the specified failure mechanism. The design fidelity index evaluates the degree of loss of armoring rocks, erosion of main body of breakwater, displacement of cap-concrete, lee side damage by overtopping, and scouring near the toe, which are the primary failure mode of the outer port facilities, and displays these damage extents of each of 5 primary failure mode in polar coordinates. Among the various failure modes mentioned above, scouring near the toe has been found in most outer port facilities, and as a result, the current design practice like whether to install scouring-prevention work is determined based on the limit depth for the incipient sediment motion needs to be revised. Numerical simulation shows that with sediment motion triggered by harsh water surface displacement in the standing waves formed in front of vertical type breakwater being accounted for, the robustness of scouring prevention works, which takes the maximum scour depth as the maximum wave height, could be secured. In addition, among the various quantitative indexes that can provide information concerned with how robust or vulnerable the outer port facilities would be by adjusting design waves return period, it turns out that the increasing rate of failure probability associated with the unit change in the nominal diameter of armoring rocks could provide most promising results.

Research on Seawall Flood Defense Criteria

Study on the Characteristics of Flow over a Seawall and Its Impact on Pedestrians under Solitary Wave Action

Discussion on Several Questions in Design of Sea Dike

Analysis of durability for sea dam foundation

Safety Evaluation of an Ancient Masonry Seawall Structure with Modified DDA Method

Key technology for risk analysis and safety evaluation of Qiantang River seawall

Impact of Multiphase Flow Simulation of Breaking Waves on a Vertical Seawall with a Recurved Parapet

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Stochastic Analysis and Simulation for Seawall Engineering on Qiantang Estuary

Experimental Study Of Failure Mechanism Of Apron Structure Of Ancient Qiantang River Seawall

Risk Analysis of Seawall Overflowed by Storm Surge During Super Typhoon

Experimental Investigation of Wave Propagation and Overtopping over Seawalls on a Reef Flat

Seepage and Stability Analysis of Seawalls in Progress of Tidal Level Fluctuation

Failure Mechanism and Conservation of the Ancient Seawall Structure along Hangzhou Bay, China

Analysis of Numerical Simulation of Seepage Failure and Seepage Feature of Seawall

Analysis of Effect Factors on Seawall Seepage Deformation

Concrete Seawalls: Load Considerations, Ecological Performance, Durability, and Recent Innovations

Analysis on Wave Run-Up Calculation and Discussion on Overtopping Design Criteria for Sea Dike

A quasi-three-phase flow simulation of the interactions between solitary waves and a vertical seawall installed on a sandy beach

Preliminary Study on an amendment to the Design Guideline of Outer Port Facilities Against Harsh Wave Conditions due to Climate Change based on Design Fidelity Index

Ecological preservation based multi-objective optimization of coastal seawall engineering structures