Abstract:Ionic liquids (ILs) have attracted much attention as promising electrolytes for electrochemical devices due to their wide electrochemical window (stability) and negligible vaporization. For such applications, nanostructured electrodes have advantage on their large surface area leading to accumulation of large density energy at the interface. However, recent reports on IL/electrode interfaces revealed that quite unique structures can be formed, and it is not clear how the interface forms and how it changes by forming an electric double layer (EDL). In this study, we investigated the interfacial capacitance of nanostructured Au electrodes using electrochemical impedance spectroscopy (EIS) and IR measurements. Polystyrene beads were self-assembled in a close packed form on a gold substrate by dipping in polystyrene beads solution and rapid drying. Au electrodeposition on thus prepared surface followed by removal of the beads resulted in the fabrication of a nanostructured Au electrode with periodic dimples. Electrochemical behavior of a ferrocene dissolved ionic liquid (1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide (BMI-TFSA)) at the nanostructured and flat Au electrodes were investigated by EIS. We found that the capacitance of the nanostructured electrode was smaller than that of the flat electrode in the whole potential range. This result suggests that the thickness of the electric double layer formed in the nano-sized dimple is thicker than that formed on the flat surface. In the case of nanostructured Au electrode having 160 nm diameter dimples, the large capacitance was observed comparing with other electrodes having the dimples of different sizes. In addition, on the negative-going scan, the capacitance takes maximum at 0.1 V vs. Fc/Fc + , whereas no peak was found on the reverse positive-going scan. This result indicates that the exchange of cation/anion layers smoothly proceeded on the negative-going scan, whereas such a smooth exchange was prevented due to strongly surface-adsorbed BMIM + on the positive-going scan. We also found that the hysteresis behavior was relatively suppressed in the case of the electrodes having 70 nm and 120 nm diameter dimples. We carried out the In-situ ATR-IR measurement to investigate the structure of ionic liquid molecules at the ionic liquid/electrode interface. The details of the relationships between the arrangement of ionic liquid at the interface and the capacitance of the electrode will be discussed.

Electrochemical Behaviors and Spectral Studies of Ionic Liquid (1-Butyl-3-methylimidazolium Tetrafluoroborate) Based Sol–gel Electrode

Comparative Studies on Electrochemical Cycling Behavior of Two Different Silica-Based Ionogels

A Room-Temperature Ionic-Liquid-Templated Proton-Conducting Gelatinous Electrolyte

Effect of Electrode Surface Chemistry on Ion Structuring of Imidazolium Ionic Liquids

Assessment of Electrochemical Characteristics of BMIMBF4 and Polymer Electrolyte Based on it

Studies on electrochemical behaviour of PVdF-HFP based ionic liquid gel polymer electrolyte

In Situ Raman Monitoring of Potential-Dependent Adlayer Structures on the Au(111)/Ionic Liquid Interface

Electrochemical Deposition of Silver in Room-Temperature Ionic Liquids and Its Surface-Enhanced Raman Scattering Effect.

Electrochemical Behavior of Cobalt from 1-Butyl-3-methylimidazolium Tetrafluoroborate Ionic Liquid

In situ analysis of interfacial reactions between negative MCMB, lithium electrodes, and gel polymer electrolyte

An Ionic Liquid‐Based Gel Electrolyte: Formation Mechanism and Feasibility for Lithium Metal Batteries

Formation and Breakdown of the Solid-electrolyte Interphase in a Bis(fluorosulfonyl)amide-based Ionic Liquid in the Presence of Lithium Ion

Synthesis and Ionic Conductivity of Polymeric Ion Gel Containing Room Temperature Ionic Liquid and Phosphotungstic Acid

Trialkyl-Substituted Imidazolium-Based Ionic Liquids for Electrochemical Applications: Basic Physicochemical Properties

A novel room temperature ionic liquid sol–gel matrix for amperometric biosensor application

Effect of Methylsisesquioxane Filler on the Properties of Ionic Liquid Based Polymer Electrolyte

[BMIM][X] Ionic Liquids Supported on a Pillared-Layered Metal-Organic Framework: Synthesis, Characterization, and Adsorption Properties

The interaction of ethylammonium tetrafluoroborate [EtNH3+][BF4-] ionic liquid on the Li(001) surface: towards understanding early SEI formation on Li metal

Direct proteins electrochemistry based on ionic liquid mediated carbon nanotube modified glassy carbon electrode.

Voltammetric Behaviour and Electrodeposition of Samarium in 1-Butyl-1-methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide Ionic Liquid

(Invited, Digital Presentation) Influence of Hemisphere-Shaped Nanodimples of Gold Electrode on Capacitance in Ionic Liquid