Abstract:Multistage supercharging is an effective way to solve the problems of low volumetric efficiency and combustion deterioration of piston engines under high altitude conditions. As a critical component of the supercharger system, the high-altitude intercooler performance is challenged to meet the heavy heat load caused by the large boosting ratio. The purpose of this study was to add more knowledge on the high-altitude intercooler performance to the limited existing studies. The intercooler experimental tests were conducted in a high-altitude simulation system, allowing for simultaneous pressure and temperature reductions. A 3D computational fluid dynamics (CFD) model was developed and validated against experimental results to investigate the intercooler performance, including the heat exchange and pressure drop characteristics. The results indicated that the atmospheric conditions and cruising speed significantly affected the intercooler performance. For example, the weighting of the effects of the temperature difference and air density on heat exchange performance varied with altitude. The altitude of 11 km was the turning point of the heat transfer rate because it is the junction of the troposphere and stratosphere. Based on this finding, this study further investigated whether a higher cruise speed could compensate for heat transfer deterioration with increasing altitude, more consistent with actual flight conditions. The simulation results showed that the variation of cruise speed directly affected the effectiveness of the heat exchanger, resulting in a different trend with altitude. Furthermore, the heat exchange of the intercooler fluctuated less with altitude under variable speed conditions. Overall, these findings support more fundamental research on high-altitude intercoolers, which may benefit the design and optimization of high-altitude engines and turbocharged systems.

Analysis of Fuel-consumption of Hypersonic Vehicle During Cruise

Optimal Analysis of the Fuel Consumption of Combined Cycle Propulsion Systems

Cruise Trajectory Analysis of Scramjet-Powered Hypersonic Vehicle

A Novel Non-Uniform Optimal Control Approach for Hypersonic Cruise Vehicle with Waypoint and No-Fly Zone Constraints.

Study on Relationship between Periodic Cruise and Configuration Parameters of Hypersonic Vehicle

Multidisciplinary Design Optimization of Reentry-Powered Hypersonic Vehicles Based on Surrogate Model

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Optimization of Maneuvering Flight Path of Hypersonic Vehicle

DETERMINATION OF PERIODIC CRUISE CONDITION OFHYPERSONIC VEHICLE

Performance Analysis of Fuel Vapor Turbine and Closed-Brayton-cycle Combined Power Generation System for Hypersonic Vehicles

Numerical Investigation of the Intercooler Performance of Aircraft Piston Engines under the Influence of High Altitude and Cruise Mode

Control Variable Parameterisation With Penalty Approach For Hypersonic Vehicle Reentry Optimisation

Flight trajectory optimization study of a variable-cycle turbine-based combined cycle engine hypersonic vehicle based on airframe/engine integration

Design optimization of velocity-controlled cruise vehicle propelled by throttleable hybrid rocket motor

A Rapid Method of Integrated Aeropropulsive Analysis for the Conceptual Design of Airbreathing Hypersonic Aircraft

Evaluation method for hypersonic vehicle trajectory optimization

Optimization for Economical Cruising Strategy of Continuously Variable Transmission Vehicle Using Pseudo-Spectral Method

Optimization and Analysis of Economical Accelerating Strategy for CVT Vehicles

Fuel-Saving Cruising Strategies for Parallel HEVs.

Periodicity based cruising control of passenger cars for optimized fuel consumption

Research on Optimization of an Accelerated Trajectory for Ramjet-Powered Vehicle