Abstract:Objectives: This work presents laser coating of grade 1 pure titanium (Ti) dental implant surface with sintered biological apatite beta-tricalcium phosphate (β-TCP), which has a chemical composition close to bone. Materials and methods: Pulsed Nd:YAG laser of single pulse capability up to 70 J/10 ms and pulse peak power of 8 kW was used to implement the task. Laser pulse peak power, pulse duration, repetition rate and scanning speed were modulated to achieve the most homogenous, cohesive and highly adherent coat layer. Scanning electron microscopy (SEM), energy dispersive X-ray microscopy (EDX), optical microscopy and nanoindentation analyses were conducted to characterise and evaluate the microstructure, phases, modulus of elasticity of the coating layer and calcium-to-phosphate ratio and composition.Results showed that the laser power and scanning speed influenced coating adherence. The cross-sectional field-emission scanning electron microscopy images at low power and high speed showed poor adherence and improved as the laser power increased to 2 kW. Decreasing the scanning speed to 0.2 mm/s at the same power of 2 kW increased adherence. EDX results of the substrate demonstrated that the chemical composition of the coat layer did not change after processing. Moreover, the maps revealed proper distribution of Ca and P with some agglomeration on the surface. The sharp peaks on the X-ray diffraction patterns indicated that β-TCPs in the coat layer were mostly crystalline. The elastic modulus was low at the surface and increased gradually with depth to reach 19 GPa at 200 nm; this value was close to that of bone. The microhardness of the coated substrate increased by about 88%. The laser pulse energy of 8.3 J, pulse peak power of 2 kW, pulse duration of 4.3 min, repetition rate of 10 Hz and scanning speed of 0.2 ms-1 yielded the best results. Conclusion: Both processing and coating have potential use for dental implant applications.

Microstructure and Bonding Feature of the Bioceramic Composite Coating Obtained by Nd: YAG Laser Cladding

In-situ synthesis and characterization of calcium phosphate coatings on rapidly solidified zirconia toughened alumina eutectic bioceramics by laser cladding

Laser Surface Coating of Re Bioceramic Layer on Tc4

Effects of La2O3contents on microstructure and properties of laser-cladded 5 wt% CaB6/HA bioceramic coating

Cladding Bio-Ceramic Coatings of Low SiO2-HA on the Surface of Titanium Alloy

Development of Bioactive Ceramic Coating on Titanium Alloy substrate for Biomedical Application Using Dip Coating Method

Structure design, preparation and performance of a novel composite coating on medical magnesium-zinc alloy

Corrosion, wear and biocompatibility of hydroxyapatite bio-functionally graded coating on titanium alloy surface prepared by laser cladding

Bioactive composite gradient coatings of nano-hydroxyapatite/polyamide66 fabricated on polyamide66 substrates

Effect of CeO2 and Y2O3 on microstructure, bioactivity and degradability of laser cladding CaO-SiO2 coating on titanium alloy

Research Status and Progress of Bioceramic Coating Preparation Technology

Precipitation Control And Mechanical Property Of Calcium Phosphate-Coated Az31b Alloy For Biomedical Application

High-resolution Transmission Electron Microscopy Investigations of a Highly Adhesive Hydroxyapatite Coating/titanium Interface Fabricated by Ion-Beam-assisted Deposition.

Novel biodegradable calcium phosphate/polymer composite coating with adjustable mechanical properties formed by hydrothermal process for corrosion protection of magnesium substrate

Implementation and characterization of coating pure titanium dental implant with sintered β-TCP by using Nd:YAG laser

Comparative investigation into effects of ZrO2 and Al2O3 addition in fluorapatite laser-clad composite coatings on Ti6Al4V alloy

Tribological and corrosion performance of the plasma-sprayed conformal ceramic coating on selective laser melted CoCrMo alloy

Ca-P bioactive coating prepared by combining microwave-hydrothermal and supersonic atmospheric plasma spraying methods

Laser remelting hydroxyapatite coating on medical Mg alloy

Effect of Na2O and ZnO on the microstructure and properties of laser cladding derived CaO-SiO2 ceramic coatings on titanium alloys

Study on the corrosion resistance of SiC particle-reinforced hydroxyapatite‐silver gradient bioactive ceramic coatings prepared by laser cladding