Abstract:Despite all the expectations for photoacoustic endoscopy (PAE), there are still several technical issues that must be resolved before the technique can be successfully translated into clinics. Among these, electromagnetic interference (EMI) noise, in addition to the limited signal-to-noise ratio (SNR), have hindered the rapid development of related technologies. Unlike endoscopic ultrasound, in which the SNR can be increased by simply applying a higher pulsing voltage, there is a fundamental limitation in leveraging the SNR of PAE signals because they are mostly determined by the optical pulse energy applied, which must be within the safety limits. Moreover, a typical PAE hardware situation requires a wide separation between the ultrasonic sensor and the amplifier, meaning that it is not easy to build an ideal PAE system that would be unaffected by EMI noise. With the intention of expediting the progress of related research, in this study, we investigated the feasibility of deep-learning-based EMI noise removal involved in PAE image processing. In particular, we selected four fully convolutional neural network architectures, U-Net, Segnet, FCN-16s, and FCN-8s, and observed that a modified U-Net architecture outperformed the other architectures in the EMI noise removal. Classical filter methods were also compared to confirm the superiority of the deep-learning-based approach. Still, it was by the U-Net architecture that we were able to successfully produce a denoised 3D vasculature map that could even depict the mesh-like capillary networks distributed in the wall of a rat colorectum. As the development of a low-cost laser diode or LED-based photoacoustic tomography (PAT) system is now emerging as one of the important topics in PAT, we expect that the presented AI strategy for the removal of EMI noise could be broadly applicable to many areas of PAT, in which the ability to apply a hardware-based prevention method is limited and thus EMI noise appears more prominently due to poor SNR.

Photoacoustic Signals Denoising Based On Empirical Mode Decomposition And Energy-Window Method

Denoising Signals for Photoacoustic Imaging in Frequency Domain Based on Empirical Mode Decomposition

De-noising of Photoacoustic Sensing and Imaging Based on Combined Empirical Mode Decomposition and Independent Component Analysis

A Denoising Module Based on the Wavelet and Empirical Mode Decomposition for Photoacoustic Microscopy

Photoacoustic Imaging Optimization with Raw Signal Deconvolution and Empirical Mode Decomposition

Biomedical Photoacoustic Imaging Optimization with Deconvolution and EMD Reconstruction

A Noise Reduction Method for Photoacoustic Imaging in Vivo Based on EMD and Conditional Mutual Information

Combining EMD with ICA for Photoacoustic Imaging Denoising

Analysis and Denoising of Electric Noise in Phased Array Ultrasonic Testing System

Adaptive Photoacoustic Imaging Quality Optimization with Emd and Reconstruction

Signal and Image De-Noising Algorithm Investigation for Photoacoustic Tomography System

Intelligent Denoising Algorithm for Signals Based on Three-Dimensional Photoacoustic Tomography System

Wavelet De-Noising Method with Adaptive Threshold Selection for Photoacoustic Tomography.

Gradient-based adaptive wavelet de-noising method for photoacoustic imaging in vivo

Spatiotemporal singular value decomposition for denoising in photoacoustic imaging with low-energy excitation light source

Photoacoustic Tomography from Weak and Noisy Signals by Using a Pulse Decomposition Algorithm in the Time-Domain.

De-Noising of Photoacoustic Microscopy Images by Attentive Generative Adversarial Network

De-Noising of Photoacoustic Microscopy Images by Deep Learning

Deep-Learning-Based Algorithm for the Removal of Electromagnetic Interference Noise in Photoacoustic Endoscopic Image Processing

Photoacoustic Imaging Method Based on Arc-Direction Compressed Sensing and Multi-Angle Observation.

Enhancement of Photoacoustic Microscopy by Using a Non-Negative Constrained Pulse Decomposition Method