Abstract:The morphology-controlled synthesis of SnO2 hollow/nanoporous nanostructures (nanotubes, urchin-like morphologies and nanospheres) was achieved via a template-engaged replacement reaction at a mild temperature (lower than 80 degrees C). The formation mechanism of hollow interior and nanoporous walls for the obtained SnO2 nanostructures (SnO2 nanotubes were used as an example) was investigated based on TEM and HRTEM observations during different reaction stages. It is found that bridge voids firstly form at the MnO2/SnO2 interface, followed by the inward development of voids before the MnO2 core is completely consumed. Two types of short-circuited galvanic cells, MnO2/Mn2+ rSnO(2)/Sn2+ and concentration cell-SnO2/Sn2+ (interior) rSnO(2)/Sn2+ (exterior), are probably responsible for the formation of SnO2 nanotubes and outward growth of SnO2 along MnO2. Moreover, the calculation result of the outer diameter of SnO2 nanotubes is in good agreement with the observation results by SEM and TEM. When evaluated as anodes for lithium ion batteries (LIBs), the three SnO2 nanostructures exhibit superior rate capability and cycling performance. Especially, SnO2 nanotubes present the best rate capability: specific capacities of above 800 mA h g(-1) at 200 mA g(-1) and about 500 mA h g(-1) at 4000 mA g(-1) were achieved, respectively. Importantly, the 1D morphology of SnO2 nanotubes can be well preserved after prolonged cycling at a relatively high current density, indicating good structural stability of the resulting nanotubes during the Li+ insertion/extraction process. These results indicate that the obtained SnO2 hollow/nanoporous nanostructures would be promising anode materials for next-generation LIBs.

Oxidation-Crystallization Process of Colloids: An Effective Approach for the Morphology Controllable Synthesis of SnO2 Hollow Spheres and Rod Bundles

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Metal oxide and sulfide hollow spheres: layer-by-layer synthesis and their application in lithium-ion battery.

Self-templating synthesis of SnO2-carbon hybrid hollow spheres for superior reversible lithium ion storage.

Facile Synthesis of SnO2/Fe2O3 Hollow Spheres and their Application as Anode Materials in Lithium‐ion Batteries

Morphology-controlled synthesis of SnO2/C hollow core–shell nanoparticle aggregates with improved lithium storage

One-pot Template-Free Synthesis, Formation Mechanism, and Lithium Ions Storage Property of Hollow SnO 2 Microspheres

A Bubble-Template Approach for Assembling Ni-Co Oxide Hollow Microspheres with an Enhanced Electrochemical Performance As an Anode for Lithium Ion Batteries.

Large-scale low temperature fabrication of SnO2 hollow/nanoporous nanostructures: the template-engaged replacement reaction mechanism and high-rate lithium storage.

Synthesis of SnO2 Hollow Nanostructures with Controlled Interior Structures Through a Template-Assisted Hydrothermal Route

Hollow Α-Fe2o3core–shell Colloidosomes: Facile One-Pot Synthesis and High Lithium Anodic Performances

Formation of SnO2 hollow nanospheres inside mesoporous silica nanoreactors.

Monodisperse yolk-shell SnO2/C submicron spheres fabricated through a facile process as an anode material for lithium-ion batteries

Use of Carbonaceous Polysaccharide Microspheres As Templates for Fabricating Metal Oxide Hollow Spheres

Engineering Molecular Polymerization for Template‐Free SiOx/C Hollow Spheres As Ultrastable Anodes in Lithium‐Ion Batteries

Delicate Control of Multi-shelled Zn-Mn-O Hollow Microspheres as a High-Performance Anode for Lithium-Ion Batteries.

Two-Dimensional Amorphous SnOx from Liquid Metal: Mass Production, Phase Transfer, and Electrocatalytic CO2 Reduction Toward Formic Acid

Controllable formation of multi-layered SnO<sub>2</sub>@Fe<sub>2</sub>O<sub>3</sub> sandwich cubes as a high-performance anode for Li-ion batteries

One-pot Microwave Hydrothermal Synthesis of Monodisperse Core–Shell-Structured SnO2@C Microspheres

Morphology-Controlled Synthesis of Sno2 Nanotubes by Using 1d Silica Mesostructures As Sacrificial Templates and Their Applications in Lithium-Ion Batteries

Morphologically Controlled Electrodeposition of Zno and Cu2o by the Colloidal Crystal Template Method