Two-stage Heat Transfer Characteristics of Constrained Melting Inside an Isothermally Heated Horizontal Cylinder
Zeshi Gao,Huiying Wu,Yuanpeng Yao
DOI: https://doi.org/10.1016/j.ijthermalsci.2019.05.023
IF: 4.779
2019-01-01
International Journal of Thermal Sciences
Abstract:An experimental and numerical investigation has been performed on the quantitative determination of two-stage heat transfer characteristics of constrained melting process of phase change material (PCM) inside a horizontal cylinder. Melting experiments are conducted with paraffin in a cylinder subjected to different boundary temperatures. The solid-liquid interface and temperature field of PCM are captured using photography and infrared technique, respectively, which are then used to validate the numerical models established based on the enthalpy method. A scale analysis is performed to estimate the order of magnitude of the influence factors. With the validated models, the melting processes of PCM inside a horizontal cylinder covering a wide range of Rayleigh number (Ra), Stefan number (Ste) and Fourier number (Fo) are simulated and analyzed carefully. It is found that the transition point between the conduction and convection stages depends greatly on the Rayleigh number while has little relation with the Stefan number. Particularly, three important Rayleigh numbers are identified: when Ra < 5.0 × 103, the PCM melted in the conduction stage is more than 90%, indicating that the natural convection effect on the melting heat transfer is very weak; when Ra > 3.3 × 107, the PCM melted in the convection stage is more than 90%, so the natural convection dominates the melting process; when Ra = 5.3 × 104, the PCM melted in conduction and convection stages are both equal to 50%. For the conduction stage, the heat transfer characteristics depend only on the dimensionless melting time (FoSte), while for the convection stage, the heat transfer characteristics depend not only on the Fourier and Stefan numbers, but also on the Rayleigh number. Based on the numerical and the scale analysis results, the correlation for the dimensionless transition melting time (FoSte)tr (which can be used to distinguish between the conduction stage and convection stage) as well as the correlations of liquid fraction (α) and Nusselt number (Nu) for the conduction and convection stages, respectively, are proposed. These correlations, with a wide application range of Rayleigh and Stefan numbers, agree well with the experimental and theoretical results from both present study and open literature, and can well predict the two-stage heat transfer characteristics of constrained melting in a horizontal cylinder.