Abstract:Good-quality metallurgical bonding and a high degree of automation are critical for using laser cladding technology in on-site repairs. At present, most of the on-site repairs are carried out manually, which can bring about problems such as complicated operation procedures, uneven repair quality, and personnel injuries. In this study, a surface repair method that combined laser cleaning with cladding (LCC) was proposed. First, the plates were scanned with a high-frequency pulsed laser to remove the surface impurity layer. The surface was then coated with Inconel 625 powder while irradiated with a continuous laser for the cladding. Both the macro-morphology and microstructure of the surface were examined, and mechanical property tests were also conducted. The metallographic and scanning electron microscope images indicated that, compared to the manual polishing and laser cladding process, the LCC specimens had a better metallurgical bonding quality and a thicker clad layer. The average hardness of the clad layer on the LCC specimens was high at 256.47 HV, 36.2% higher than that of the Q345R substrate. Compared to the Q345R specimens of the same size, the LCC specimens showed an increased impact on the energy absorption, yield strength, and tensile strength. This study provides a new approach for improving the automation and cladding quality of on-site repairs.

Research of Laser-melt-repairing Technology

Basic Experimental Researches On Repairing Technology of Laser Cladding

The application of laser cladding technology in mechanical repair work

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Experimental Research and Engineering Application of Laser Cladding Reparations

Application Status of Laser Cladding Technology in Repair of Structures

Rebuilding of metal components with laser cladding forming

Application of Laser Cladding Reparations

The Experimental Researches and Engineering Applications on Repairing Cast-steel Components by Laser Cladding

Technological Research on Repairing the Damaged Copper Alloy Parts by Use of Laser Cladding

Application of Laser Forming Repair Technology on the Aerial Castings

Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology

Laser Cleaning Combined with Cladding Improves Cladding Quality for Repairing Steel Plates in Pressure Vessels

Study on damage boundary extraction and shape reduction of laser cladding parts

The Application of Laser Cladding Technique in Dies Repairing

Experimental Research on Repairing the Wearing Parts by Use of Laser Cladding

Finite Element Numerical Simulation and Repair Process of Laser Cladding Repair of Surface Cracks on Mechanical Parts

Study on Microstructure and Properties of Repaired Laser Cladding on High-temperature Forging Mould for Aeroengine Pieces

Researches on the Temperature Field During the Process of Reparation by Laser Cladding Through Simulation and Experiments

A review of recent advances in integrated laser remelting and laser cladding processes

Study on Mechanical Properties and Microstructure of 40Cr Repaired by Laser Cladding Fe901 under Different Atmospheres