The Performance of Iodine on the Removal of Elemental Mercury from the Simulated Coal-Fired Flue Gas.

Yao Chi,Naiqiang Yan,Zan Qu,Shaohua Qiao,Jinping Jia

DOI: https://doi.org/10.1016/j.jhazmat.2008.11.130

IF: 13.6

2009-01-01

Journal of Hazardous Materials

Abstract:In order to facilitate the removal of elemental mercury (Hg0) in flue gas, iodine was used as the oxidant to convert Hg0 to the oxidized or particulate-bound form. The removal of Hg0 by the homogenous gas phase reaction and the heterogeneous particle-involved reactions was investigated under various conditions, and a method to test the particle-involved reaction kinetics was developed. Iodine was found to be efficient in Hg0 oxidation, with a 2nd-order rate constant of about 7.4(±0.2)×10−17cm3molecules−1s−1 at 393K. Nitric oxide showed significant inhibition in the homogenous gas reaction of Hg0 oxidation. The oxidation of Hg0 with iodine can be greatly accelerated in the presence of fly-ash or powder activated carbon. SO2 slightly reduced Hg0 removal efficiency in the particle-involved reaction. It was estimated that Hg0 removal efficiency was as high as 70% by adding 0.3ppmv iodine into the flue gas with 20g/m3 of fly-ash. In addition, the predicted removal efficiency of Hg0 was as high as 90% if 10mg/m3 of activated carbon and 0.3ppmv iodine were injected into the flue gas with fly-ash. The results suggest that the combination of iodine with fly-ash and/or activated carbon can efficiently enhance the removal of Hg0 in coal-fired flue gas.