Abstract:The explosive ordnance disposal robot (EOD robot), refers to the robot which can conduct reconnaissance, disposal and handling of the explosives at the scene of the accident as a substitute under the circumstances which are not allowed or suitable for human's appearance; it can also attack terrorists effectively. It is important to improve the power of antiterrorism and to safeguard the state development of politics and economy. We introduce the implementation of control system based on the ARM9 microprocessor S3C2410 for our EOD robot in this paper. According to the robot's hardware design, embedded Linux operating system is selected as the platform of the software development. The embedded control system can achieve many tasks of the robot, such as motion control, suspicious objects searching, explosive ordnance disposal, communication with the remote control system and executing complex control algorithms. With the development of robotics technology, the application of robot has been extended more and more widely. The robot is required not only to complete some large-scale assemblage tasks in work, but also to achieve complex missions. The explosive ordnance disposal robot (EOD robot), refers to the robot which can conduct reconnaissance, disposal and handling of the explosives at the scene of the accident as a substitute under the circumstances which are not allowed or suitable for human's appearance. The research on the EOD robot began in the 1960s. With the situation of the international anti-terrorism and the deepening of the fight against terrorism, especially after the 911 terrorist attacks, a number of large international companies, universities and research institutes have developed many kinds of EOD robots, for example Wheel barrow, SuperM, Hadrian, TSR200, Packbot, etc. To protect the safety of the personnel, we develop an EOD robot for the searching and the explosive ordnance disposal of the dangerous articles in the danger zones. Our EOD robot is a ground mobile robot with six tracks as shown in Fig .1. Two main tracks are driver tracks. Two front arm tracks and two rear arm tracks are used to cross obstacles. Four tracked arms make robot be suitable for different terrain environments because robot can move in both tracked mode and legged mode. Having certain autonomy and the ability to go across the bumpy ground of a complex terrain, the robot achieves its strong obstacle-climbing ability through pre-and-post deformation of its arm movements. Five cameras are installed at different places of the robot so the remote operator could have a full view of the robot's ambient environment and search suspicious objects easily. With the 7-joints long arm, the robot can complete the grasp of 8-10 kilogram objects. A force sensor is attached on the robot's paw in case the suspicious object is broken by over grasped. Besides, an independent remote restart device is used for restart the robot if it becomes out of control.

Single-Hand and Binocular Eye-in-Hand System for Semi-Intelligent EOD Robot

A Single-Hand And Binocular Visual System For Eod Robot

Research and Implementation of Automatic Grasping of a EOD Robot Based on Computer Binocular Stereo Vision

An Automatic Control System for Eod Robot Based on Binocular Vision Position.

Research and Development on Explosive-handling Robot Binocular Visual System

Design and Implementation of Binocular Visual System Based on EVision

Research and Implementation of Video and Image System for Explosive-handling Robot

AN AUTONOMOUS HAND-EYE CALIBRATION METHOD

Hand-Eye Calibration of EOD Robot by Solving the AXB = YCZD Problem

Hand-eye Calibration of Dual Mechanical Arms of Explosive Ordnance Disposal Robot

Hybrid Calibration and Detection Approach for Mobile Robotic Manufacturing Systems.

Design of Control System for EOD Robot Based on Embedded Linux

FC-EODR: Immersive Humanoid Dual-Arm Dexterous Explosive Ordnance Disposal Robot

Control System of Bomb-disposal Robot Based on Binocular Vision Location

A Vision-Based Fully-Automatic Calibration Method for Hand-Eye Serial Robot

Research on hand-eye robot

Design of a Large Explosive Ordnance Disposal Robot

A Simultaneous Hand-Eye Calibration Method for Hybrid Eye-in-Hand/Eye-to-Hand System

Design and Analysis of Intelligent Data Acquisition System Based on Robotic Arms

Design And Calibration Of A Binocular Vision System For Arc Welding Robot

CAD-based 3D Robot Vision.