New Ultraviolet Emissive Wide-Bandgap Semiconductive Polymers

P Lu,HQ Zhang,Y Zheng,YG Ma,G Zhang,XF Chen,JC Shen

DOI: https://doi.org/10.1016/s0379-6779(02)00576-3

IF: 4

2003-01-01

Synthetic Metals

Abstract:The new wide-bandgap semiconductive polymers composed of fluorene and seven-membered bridged biphenyl moteitis were synthesized. The polymers showed the bandgap of >3.3 eV and light emission at <380 nm with quantum efficiency of > 60 %.

What problem does this paper attempt to address?

A Wide‐Bandgap Semiconducting Polymer for Ultraviolet and Blue Light Emitting Diodes

P Lu,HQ Zhang,FZ Shen,B Yang,D Li,YG Ma,XF Chen,JH Li,N Tamai

DOI: https://doi.org/10.1002/macp.200300006

IF: 2.996

2003-01-01

Macromolecular Chemistry and Physics

Abstract:A novel wide-bandgap conjugated polymer (PDHFSCHD) consisting of alternating dihexylfluorene and rigidly twisted biphenyl units has been synthesized. The new fluorene-based copolymer composed of rigid twisting segments in the main-chain exhibits an optical bandgap of as high as 3.26 eV, and a highly efficient ultraviolet emission with peaks at 368 nm and 386 nm. An electroluminescence device from PDHFSCHD neat film as an active layer shows UV emission which peaks at 395 nm with a turn on voltage below 8 V By optimizing the device conditions, a peak EL quantum efficiency of 0.054% and brightness of 10 cd.m(-2) was obtained. Furthermore, blending a poly(dihexylfluorene) in the PDHFSCHD host gave pure blue emission peaking at 417 nm, and 440 nm without long wavelength emission from aggregated species. Efficient energy transfer from PDHFSCHD to PDHF was demonstrated in these blended systems. Depressed chain-aggregation of PDHF in the PDHFSCHD host can correspond to pure blue emission behaviors.
Synthesis and Photovoltaic Performance of Novel Thiophenyl-Methylene-9h-Fluorene-Based Low Bandgap Polymers

Jiefeng Hai,Baofeng Zhao,Fujun Zhang,Chuan-Xiang Sheng,Liangming Yin,Yang Li,Enwei Zhu,Linyi Bian,Hongbin Wu,Weihua Tang

DOI: https://doi.org/10.1016/j.polymer.2013.07.001

IF: 4.6

2013-01-01

Polymer

Abstract:Three novel donor-acceptor polymers have been synthesized with Suzuki cross-coupling between thiophenyl-methylene-9H-fluorene donating unit with thiazolo[5,4-d]]thiazole (PHI benzothiadiazole (PFTODTBT) or [1,2,3]triazolo[4,5-g]quinoxaline (PFTDTBTzQ) accepting unit. The polymer PFTTTz-THF prepared from tetrahydrofuran (THF) presented higher molecular weight and narrower polydiversity than that from toluene (PFTTTz-toluene), leading to higher photovoltaic performance in BHJ devices of these polymers blended with PC71BM ([6,6]-phenyl-C-71-butyric acid methyl ester). These good solution processable polymers exhibit a bandgap of 1.66-1.93 eV and a low highest occupied molecular orbital (HOMO) energy level similar to -5.32 eV. Polymers PFTTTz and PFTODTBT displayed strong absorption in the range of 300-650 nm, while PFTDTBTzQ showed a further 100 nm extended absorption band. Overall efficiencies over 1.5% are achieved for BHJ devices fabricated from blends of PFTITz with PC71BM as active layer. A maximum power conversion efficiency of 2.21% is obtained by the use of interlayer poly [(9,9-dioctyl-2,7-fluorene)-alt-(9,9-bis(3'-(N, N-dimethylamino)propyl)-2,7-fluorene)] (PFN) and Ca between active layer and Al anode. (C) 2013 Elsevier Ltd. All rights reserved.
Highly Efficient and Stable Blue Polymer Light Emitting Diodes Based on Polysilafluorenes with Pendent Hole Transporting Groups

Guangrong Jin,Lianpeng Xia,Zhe Liu,Hong Lin,Jun Ling,Hongbin Wu,Lintao Hou,Yueqi Mo

DOI: https://doi.org/10.1039/c5tc03665h

IF: 6.4

2016-01-01

Journal of Materials Chemistry C

Abstract:Two homopolymers of triphenylamine and carbazole grafting silafluorenes (PSF-TPA and PSF-Cz) were synthesized and their electroluminescence properties were investigated in this paper. Their carbon analog polyfluorenes with the same substituents were also prepared for comparison. Polysilafluorenes are found to have higher efficiencies and better color purities than the corresponding analog polyfluorenes. Among them, PSF-Cz was found to be a new promising blue-light emitter with an external quantum efficiency of ca. 4.1% and CIE coordinates of (0.16, 0.08), which is among the best deep blue emitters for polymer light-emitting diode (PLED) applications until now. Further study revealed that the silicon atom at the 9-position showed a strong sigma conjugation effect and increased the oxidation potential of the final polymer as compared with PF-Cz. The DFT calculation also supports the experimental results. The carrier mobility measurements demonstrate that PSF-Cz has the highest hole mobility and well-balanced hole and electron carriers among them, corresponding to its highest EL efficiency.
Synthesis and characterization of novel low band gap polymers: Poly(heteroarylene methines)

Qinghui Zhang,Jichang Feng,Kuan Liu,Dexi Zhu,Mujie Yang,Hui Ye,Xu Liu

DOI: https://doi.org/10.1016/j.synthmet.2006.04.014

IF: 4

2006-01-01

Synthetic Metals

Abstract:A series of novel poly(heteroarylene methines) containing alternating aromatic and quinoid phenylene-thiophene moieties in the main chain were synthesized. They were readily soluble in common organic solvents, and revealed tunable band gaps. Several low band gap polymers were obtained when octoxy or decoxy groups were applied as pendent groups of phenylene unit. And relevant octoxy-substituted poly(heteroarylene methins), PDTDOBQ-Me, PDTDOBQ-ORBr and PDTDOBQ-NO2, showed electrochemical band gaps of 1.60, 1.68 and 1.76eV, respectively.
New Series Of Blue-Emitting And Electron-Transporting Copolymers Based On Fluorene

Xiaowei Zhan,Yunqi Liu,Xia Wu,Shuai Wang,Daoben Zhu

DOI: https://doi.org/10.1021/ma011593g

IF: 5.5

2002-01-01

Macromolecules

Abstract:A novel series of conjugated copolymers having oxadiazole, quinoline, quinoxaline, and pherrylenecyanovinylene moieties in the main chain based on fluorene were synthesized in good yields by palladium-catalyzed Suzuki coupling reaction, a new approach different from the traditional polyhydrazide precursor route (oxadiazole-containing polymers), acid-catalyzed Friedlander condensation reaction (polyquinolines), and Knoevenagel condensation polymerization (poly(phenylenecyanovinylene)), The thermal, electrochemical, and optical properties of these copolymers were examined. All these polymers possess excellent thermal stability with glass transition temperatures of 114-208 degreesC and onset decomposition temperatures of 387-415 degreesC. Cyclic voltammetry studies reveal that these copolymers possess low-lying LUMO energy levels ranging from -3.01 to -3.37 eV and low-lying HOMO energy levels ranging from -6.13 to -6.38 eV and may be promising candidates for electron-transporting or hole-blocking materials in light-emitting diodes. The polymers in thin films emit strong blue luminance around 414-476 nm, with narrow bandwidth upon photoexcitation. Photoluminescence spectra of the polymers in the films are only red-shifted by 7-11 nm compared to those in the solution, indicating that the aggregation and the excimer fluorescence are suppressed.
Design of Wide-Bandgap Polymers with Deeper Ionization Potential Enables Efficient Ternary Non-Fullerene Polymer Solar Cells with 13% Efficiency

Delong Liu,Ying Zhang,Lingling Zhan,Tsz-Ki Lau,Hang Yin,Patrick W. K. Fong,Shu Kong So,Shaoqing Zhang,Xinhui Lu,Jianhui Hou,Hongzheng Chen,Wai-Yeung Wong,Gang Li

DOI: https://doi.org/10.1039/c9ta04237g

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Two regioisomeric wide-bandgap polymers with different nitrogen topologies along the conjugated backbone were developed and applied in non-fullerene polymer solar cells.
New Disilyl-Substituted Poly(Phenylene Vinylene)-Related Polymers: Synthesis and Photoelectric Properties

QH Zhang,MJ Yang,P Wu,H Ye,X Liu

DOI: https://doi.org/10.1016/j.mseb.2004.06.016

2004-01-01

Abstract:A new class of disilyl-substituted poly(phenylenevinylene)-related copolymers (CN-Si-Carb-PPV, CN-Si-Ph-PPV) was synthesized by a simple condensation polymerization route. The UV–vis absorption of the polymers has strong absorption bands, which corresponds to the π–π* transition of π-conjugated segment. Photoluminescence (PL) spectra show that the emission peaks of two polymer films both have about 100 nm bathochromic shifts compared to the polymer solution. Single-layer light-emitting diodes (LED) were fabricated, which showed lower threshold voltage. The devices both emitted green light.
Photoluminescence Properties of A Series of Novel Copolymers Containing Terbium Complexes

Qidan Ling,Mujie Yang,Wen Wang,Meijuan Lin,Wengong Zhang

DOI: https://doi.org/10.3321/j.issn:1000-4343.2005.01.005

2005-01-01

Abstract:The photoluminescence (PL) properties of a series of tri-block copolymers of 9-vinylcarbazole, methyl methacrylate and terbium-methacrylate complex were investigated. In solution, the PL spectra of the copolymers consist of two emission bands, one in the 340～500 nm region and another in 480～600 nm, corresponding to the π~*→π transitions of the carbazole moieties and the f-f transitions of the terbium ion, respectively. The results show that PL intensity from terbium complex moiety in the copolymer increases with the increasing of the polarity of solvent, whereas the emission from carbazole groups in the copolymer decreasing. The dependence of PL intensity of the copolymers on different concentration, temperature, ligand and rare earth content is also discussed in detail. In the solid state, the emission from carbazole groups in the copolymer is suppressed effectively and pure green emission, with a linewidth (FWHM) of less than 10 nm for the main emission peak, is obtained from the copolymers. The significant difference between the PL intensities of carbazole groups and terbium complex moieties of the copolymers in different states is attributed to the phenomenon of "solid state quenching" which is resulted mainly from the formation of excimers of carbazole groups. Thus, these copolymers appear to be promising candidates for pure green emission in thin film polymer light-emitting devices, since they have in their main chain both the hole-transporting property of the carbazole unit and the pure green emission characteristics of the terbium complex.
Monochromatic-Red-Light Emission of Novel Copolymers Containing Carbazole Units and Europium-Acrylate Complexes

MJ Yang,QD Ling,M Hiller,XZ Fun,X Liu,LH Wang,WG Zhang

DOI: https://doi.org/10.1002/1099-0518(20000915)38:18<3405::aid-pola200>3.3.co;2-1

2000-01-01

Abstract:Nearly monochromatic-red-light-emitting polymers with pendant carbazole and europium (Eu) complex were synthesized and characterized by Fourier transform infrared, elemental analysis (EA), 1H NMR, 13C NMR, UV, and gel permeation chromatography. The photoluminescence and electroluminescence (EL) properties of these polymers were investigated. A single-layer light-emitting-diode device of the structure (indium tin oxide/polymer P4/Al) was fabricated, showing the characteristic bright-red EL of the Eu3+ complex at 614 nm at a turn-on voltage of about 17 V. The EL spectrum, current–voltage, and emission-intensity–voltage characteristics of the device were measured. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3405–3411, 2000
Synthesis and Characterization of Hyperbranched Polyfluorenes Containing Triarylpyrazoline Cores Towards Efficient Blue Light‐emitting Diodes

Qiang Peng,Liushui Yan,Dezhi Chen,Fuzhi Wang,Ping Wang,Dechun Zou

DOI: https://doi.org/10.1002/pola.22274

IF: 3.046

2007-01-01

Journal of Polymer Science

Abstract:New series of hyperbranched polyfluorenes containing triarylpyrazoline cores, PFZ10, PFZ20, PFNZ10, and PFNZ20, have been synthesized according to the “A2 + A′2 + B3” Suzuki coupling method. The structures and property of the monomers and conjugated polymers were characterized by elemental analysis, gel permeation chromatography, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, and UV–visible absorption, 1H NMR, 13C NMR, and photoluminescence spectroscopies. All these polymers exhibited good solubility in common organic solvents and good thermal stability. The long-wavelength emission of polyfluorenes had been effectively reduced in these hyperbranched polymers. Standard polymer light emitting devices (PLEDs) from PFZ10, PFZ20, PFNZ10, and PFNZ20, with the configuration of ITO/PEDOT/polymer/TPBI/Alq3/Mg:Ag, exhibited good electroluminescence (EL) properties The PLED based on PFNZ10 emitted pure blue light with a low turn-on voltage of 5.3 V and a high EL efficiency of about 1.93%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5296–5307, 2007
Novel, Blue Light-Emitting Polyfluorenes Containing a Fluorinated Quinoxaline Unit

Lei Ying,Jianhua Zou,Wei Yang,Anqi Zhang,Zhonglian Wu,Wei Zhao,Yong Cao

DOI: https://doi.org/10.1016/j.dyepig.2009.01.009

IF: 5.122

2009-01-01

Dyes and Pigments

Abstract:A series of fluorinated quinoxaline containing polyfluorenes were synthesized by Suzuki polycondensation. The polymer light emitting diodes based on the resulting copolymers emitted blue light, and no green emission was observed either in the photoluminescence spectra when the film had been annealed at 80–160°C nor in the electroluminescence spectra when the current densities increased from 5 to 200mAcm−2. The fluorescence quantum yields decreased from 79% to 36% with increasing content of BPFQ from 1 to 20mol%. Peak external quantum efficiency and luminous efficiency were 2.99% and 2.39cdA−1, respectively, with CIE coordinates of (0.16, 0.10).
New Series of Blue-Emitting and Electron-Transporting Copolymers Based on Cyanostilbene

XW Zhan,S Wang,YQ Liu,X Wu,DB Zhu

DOI: https://doi.org/10.1021/cm020843k

IF: 10.508

2003-01-01

Chemistry of Materials

Abstract:A novel series of conjugated copolymers having fluorene and binaphthyl moieties in the main chain and based on cyanostilbene were synthesized in good yields by a palladium-catalyzed Suzuki coupling reaction, a new approach different from the traditional Knoevenagel condensation polymerization. Through controllable modification of the main chain structures, not only were the thermal, electronic, and optical properties of the polymers tuned, but also the structure-property relationships were studied. All these polymers possess excellent thermal stability with glass-transition temperatures of 60-159 degreesC and onset decomposition temperatures of 411-417 degreesC. Cyclic voltammetry studies reveal that these copolymers have low-lying LUMO energy levels ranging from -2.92 to -3.08 eV and low-lying HOMO energy levels ranging from -6.01 to -6.13 eV, and they may be promising candidates for electron-transporting or hole-blocking materials in light-emitting diodes (LEDs). The polymers in thin films emit strong blue luminance around 457-489 nm with narrow bandwidth upon photoexcitation. The single-layer LED fabricated with a copolymer F-CN composed of fluorene and cyanostilbene units using an air-stable aluminum electrode emits blue light with an external quantum efficiency of 0.006%. A double-layer LED, fabricated using a blend of poly(N-vinylcarbazole) and F-CN as emitting layer and tris(8-hydroxyquinolinato)aluminum as electron transporting layer, shows an external quantum efficiency of 0.2%. Preliminary electroluminescent results show that these polymers are new candidates for blue emissive materials in polymeric LEDs.
Synthesis, Characterization, and Electroluminescence of Novel Copolyfluorenes and Their Applications in White Light Emission

Ping Wang,Hao Jin,Qian Yang,Wanli Liu,Zhihao Shen,Xiaofang Chen,Xinghe Fan,Dechun Zou,Qifeng Zhou

DOI: https://doi.org/10.1002/pola.23508

2009-01-01

Abstract:New copolyfluorenes (PC8OF0-PC8OF50) comprised of 9,9-dioctylfluorene and jacketed units 2,5-bis[(5-octyloxy-phenyl)-1,3,4-oxadiazole]-1-(3,5-dibromophenyl)-benzene (35C8) were synthesized by palladium-catalyzed Suzuki coupling reaction. They were characterized by molecular weight determination, H-1 NMR, elemental analysis, DSC, TGA, absorption and emission spectroscopy, and cyclic voltammetry (CV). These copolymers were readily soluble in common organic solvents and exhibited high glass transition temperature and thermal stability.The copolymer films showed absorption peaks from 381 nm to 351 nm, and PL peaks from 432 nm to 421 nm with a blue shift originated from 35C8 units. Both the HOMO energy levels and LUMO levels changed little as the content of 35C8 units increased (-5.59 eV to -5.48 eV and -2.60 eV to -2.49 eV). Electroluminescent devices: ITO/PEDOT:PSS[poly(ethylenedioxythiophene):polystyrenesulfonate]/polymer/Ca (25 nm)/ Ag(80 nm) (a), ITO/PEDOT:PSS/polymer/TPBI [1,3,5- tris(N-phenylbenzimidazol-2-yl)benzene](15 nm)/Mg:Ag(10:1, wt)/Ag (b), and ITO/PEDOT:PSS/PVK[Poly(N-vinyl-carbazole)]/polymer/TPBI(15 nm)/Ca(25 nm)/Ag(80 nm) (c) were fabricated to investigate the influence of jacketed contents and device architectures on emission characteristics. The maximum brightness and current efficiency of the PC8OF25 device (5097.8 cd/m(2) and 0.484 cd/A) surpassed those of the PC8OF0 device (3122.8 cd/m(2) and 0.416 cd/A). The EL emissions of PC8OF0 - PC8OF50 were pure blue and low-energy excimer emission bands were successfully suppressed, indicating that these copolymers could be good candidates for blue light-emitting materials. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4555-4565, 2009
Fluorene-Based Light-Emitting Polymers

WL Yu,B Liu,J Pei,G Zeng,W Huang

2001-01-01

Chinese Journal of Polymer Science

Abstract:Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable blue light emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at longer wavelengths) of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also be improved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, the excimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue light both in solution and in film. The optical properties are dependent on the substitution on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL and good thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure could be tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complex at the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emission with a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with different substitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physical properties of the polymers.
A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light‐Emitting Functions in One Device

Ye Xu,Yong Cui,Huifeng Yao,Tao Zhang,Jianqi Zhang,Lijiao Ma,Jingwen Wang,Zhixiang Wei,Jianhui Hou

DOI: https://doi.org/10.1002/adma.202101090

IF: 29.4

2021-04-25

Advanced Materials

Abstract:Exploring the intriguing bifunctional nature of organic semiconductors and investigating the feasibility of fabricating bifunctional devices are of great significance in realizing various applications with one device. Here, the design of a new wide‐bandgap polymer named PBQx‐TCl (optical bandgap of 2.05 eV) is reported, and its applications in photovoltaic and light‐emitting devices are studied. By fabricating devices with nonfullerene acceptors BTA3 and BTP‐eC9, it is shown that the devices exhibit a high power conversion efficiency (PCE) of 18.0% under air mass 1.5G illumination conditions and an outstanding PCE of 28.5% for a 1 cm2 device and 26.0% for a 10 cm2 device under illumination from a 1000 lux light‐emitting diode. In addition, the PBQx‐TCl:BTA3‐based device also demonstrates a moderate organic light‐emitting diode performance with an electroluminescence external quantum efficiency approaching 0.2% and a broad emission range of 630–1000 nm. These results suggest that the polymer PBQx‐TCl‐based devices exhibit outstanding photovoltaic performance and potential light‐emitting functions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
New Efficient Blue Light Emitting Polymer for Light Emitting Diodes

Wang-Lin Yu,Jian Pei,Wei Huang,Yong Cao,Alan J. Heeger

DOI: https://doi.org/10.1039/a905482k

IF: 4.9

1999-01-01

Chemical Communications

Abstract:The synthesis, by the Suzuki coupling reaction, of a novel soluble blue light emitting polymer, poly{(9,9-dihexyl-2,7-fluorene–alt-co-[2,5-bis(decyloxy)-1,4-phenylene]} (PDHFDDOP) is reported. PDHFDDOP exhibits photoluminescence (PL quantum efficiency of 40% in neat films) and electroluminescence (EL) with deep blue emission.
FLUORESCENT POLYMER DOTS WITH NARROW-BAND EMISSION

Daniel T Chiu,Wu Changfeng,Rong Yu,Zhang Yong,Wu Yi-Che,Chan Yang-Hsiang,Zhang Xuanjun,Yu Jiangbo,Sun Wei

2020-01-01

Abstract:To provide fluorescent polymer dots with narrow-band emissions.SOLUTION: Polymers, monomers, chromophoric polymer dots and related methods are provided. Highly fluorescent chromophoric polymer dots with narrow-band emissions are provided. Methods for synthesizing the chromophoric polymers, preparation methods for forming the chromophoric polymer dots, and biological applications using the unique properties of narrow-band emissions are also provided. The emission wavelength of the polymer dots can vary from ultraviolet to near infrared region. The full width at half maximum (FWHM) of the emission band is less than 70 nm. The narrow-band emissive polymer dots can also include a narrow-band emissive unit covalently attached to the chromophoric polymer, where the narrow-band emissive unit gives narrow-band emissions.SELECTED DRAWING: None
Hyperbranched triazine-containing polyfluorenes: Efficient blue emitters for polymer light-emitting diodes (PLEDs)

Gui-An Wen,Yu Xin,Xing-Rong Zhu,Wen-Jing Zeng,Rui Zhu,Jia-Chun Feng,Yong Cao,Lei Zhao,Lian-Hui Wang,Wei Wei,Bo Peng,Wei Huang

DOI: https://doi.org/10.1016/j.polymer.2006.10.032

IF: 4.6

2007-01-01

Polymer

Abstract:A series of hyperbranched triazine-containing polyfluorenes were synthesized by an “A2+A′2+B3” approach based on Suzuki polycodensation. The polymers showed pure blue emission and the maximum emissions red-shifted in polar solvents and in solid film. By introducing triazine into polyfluorene, the electron injection and transport properties were improved and green emission was suppressed. PLED devices fabricated with the polymers showed reasonably high external quantum efficiencies.
Intrinsically Stretchable and Stable Ultra‐Deep‐Blue Fluorene‐Based Polymer with a High Emission Efficiency of ≈90% for Polymer Light‐Emitting Devices with a CIE y = 0.06

Mingjian Ni,Xiang An,Lubing Bai,Kai Wang,Jiangli Cai,Shengjie Wang,Liangliang He,Man Xu,Heyuan Liu,Jinyi Lin,Xuehua Ding,Chengrong Yin,Wei Huang

DOI: https://doi.org/10.1002/adfm.202106564

IF: 19

2021-10-20

Advanced Functional Materials

Abstract:Abstract The manufacture of robust ultra‐deep‐blue polymer with an intrinsic stretchability is an extreme challenge toward fabricating flexible light‐emitting optoelectronic devices. As a key precondition for the realization of the intrinsically stretchable behavior, easily interchain slippages also cause the formation of intermolecular excited states, which is negative to the color purity and the emission efficiency of blue‐emitting film and devices. Herein, a series of π‐interrupted‐conjugated alternating polymers with a robust ultra‐deep‐blue emission and intrinsically stretchable properties are demonstrated. Interestingly, the model polymers (P4, P6, and P8) present stable ultra‐deep‐blue emission with an extremely high efficiency of ≈90% and a Commission internationale de l'éclairage (CIE) coordinates of (0.15, 0.06) in solid‐state, attributed to the excellent singlet excitonic behavior without any obvious polaron formation. More importantly, significantly different to rigid π‐conjugated polymers, the model P8 film displays an efficient deep blue emission even under a tensile rate of ≈15%, associated with the densely interchain entanglement and interpenetration. Finally, preliminary P8‐based polymer light‐emitting diodes also show a stable ultra‐deep‐blue emission with a CIE of (0.15, 0.06). All results above confirm the effectiveness of the π‐interrupted‐conjugated strategy to construct a robust deep‐blue polymer with an excellent intrinsic stretchability, which is a great potential for applying in flexible light‐emitting devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Poly[(p-phenylene vinylene)-alt-(2,2′-biphenylene vinylene)]s: new conjugated polymers with high solid state photoluminescence quantum efficiencies

Bubin Xu,Jianheng Zhang,Zhonghua Peng

DOI: https://doi.org/10.1016/s0379-6779(99)00301-x

IF: 4

2000-06-01

Synthetic Metals

Abstract:We report a novel polymer based on biphenyl-linked oligo(phenylene vinylene)s. The twisted structure of the biphenyl unit not only decreases the effective conjugation length of the polymer, allowing the luminescence color control, but also limits the inter-chain interactions, enhancing its photoluminescence quantum efficiencies.

materials science, multidisciplinary,physics, condensed matter,polymer science

New Ultraviolet Emissive Wide-Bandgap Semiconductive Polymers

A Wide‐Bandgap Semiconducting Polymer for Ultraviolet and Blue Light Emitting Diodes

Synthesis and Photovoltaic Performance of Novel Thiophenyl-Methylene-9h-Fluorene-Based Low Bandgap Polymers

Highly Efficient and Stable Blue Polymer Light Emitting Diodes Based on Polysilafluorenes with Pendent Hole Transporting Groups

Synthesis and characterization of novel low band gap polymers: Poly(heteroarylene methines)

New Series Of Blue-Emitting And Electron-Transporting Copolymers Based On Fluorene

Design of Wide-Bandgap Polymers with Deeper Ionization Potential Enables Efficient Ternary Non-Fullerene Polymer Solar Cells with 13% Efficiency

New Disilyl-Substituted Poly(Phenylene Vinylene)-Related Polymers: Synthesis and Photoelectric Properties

Photoluminescence Properties of A Series of Novel Copolymers Containing Terbium Complexes

Monochromatic-Red-Light Emission of Novel Copolymers Containing Carbazole Units and Europium-Acrylate Complexes

Synthesis and Characterization of Hyperbranched Polyfluorenes Containing Triarylpyrazoline Cores Towards Efficient Blue Light‐emitting Diodes

Novel, Blue Light-Emitting Polyfluorenes Containing a Fluorinated Quinoxaline Unit

New Series of Blue-Emitting and Electron-Transporting Copolymers Based on Cyanostilbene

Synthesis, Characterization, and Electroluminescence of Novel Copolyfluorenes and Their Applications in White Light Emission

Fluorene-Based Light-Emitting Polymers

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light‐Emitting Functions in One Device

New Efficient Blue Light Emitting Polymer for Light Emitting Diodes

FLUORESCENT POLYMER DOTS WITH NARROW-BAND EMISSION

Hyperbranched triazine-containing polyfluorenes: Efficient blue emitters for polymer light-emitting diodes (PLEDs)

Intrinsically Stretchable and Stable Ultra‐Deep‐Blue Fluorene‐Based Polymer with a High Emission Efficiency of ≈90% for Polymer Light‐Emitting Devices with a CIE y = 0.06

Poly[(p-phenylene vinylene)-alt-(2,2′-biphenylene vinylene)]s: new conjugated polymers with high solid state photoluminescence quantum efficiencies