Abstract:The response of clamped sandwich beams subjected to impact loading is analyzed based on the works of Fleck & Deshpande (2004) [9] and Reid et al. (2010) [14]. This study differentiates itself from that of Fleck & Deshpande in that the "conservation of momentum" method instead of the "energy balance" method is adopted to model the "compaction stage" of the core upon impact loading. Finite element method (FEM) is used to validate the developed analytical model and good agreement between the analytical method and FEM results is observed. Obtained results also show that, compared to the Fleck & Deshpande model, the present model gives improved predictions of the maximum lateral deflection of the front face and the boundary of the two regions where the cellular core is totally compacted and partly compacted. The developed model is then applied to study the effects of core relative density and core thickness on the maximum impulsive momentum that the sandwich beam can sustain (impact resistance), and near-optimum design is identified for a regular hexagonal core sandwich beam with given mass. In addition, based on the present model, the performance of sandwich beams with self-similar hierarchical hexagonal honeycomb cores under impact loading is studied. It is shown that, for given relative density, the strength of the self-similar hierarchical hexagonal honeycomb decreases with the hierarchical order increasing. Therefore, both the energy absorbed per unit mass of the core during the compaction stage and the impact resistance of the sandwich beam decrease as the hierarchical order increases. (c) 2012 Elsevier Ltd. All rights reserved.

Cell Size Effects for Vibration Analysis and Design of Sandwich Beams

Analyses of Transverse Vibrations of Axially Pretensioned Viscoelastic Nanobeams with Small Size and Surface Effects

Vibration Response Characteristics of Quasi-Periodic Sandwich Beam with Magnetorheological Visco-Elastomer Core under Random Support Excitations

A Finite Element Model for the Vibration Analysis of Sandwich Beam with Frequency-Dependent Viscoelastic Material Core

Nonlinear Random Vibration Suppression Analysis of Viscoelastic Sandwich Cantilever Beams

FREE VIBRATION INVESTIGATION ON RVE OF PROPOSED HONEYCOMB SANDWICH BEAM AND MATERIAL SELECTION OPTIMIZATION

Transverse Vibration of Viscoelastic Sandwich Structures: Finite Element Modeling and Experimental Study

Size-Dependent Free Vibration of Microbeams Submerged in Fluid

Stochastic Vibration Response of a Sandwich Beam with Nonlinear Adjustable Visco-Elastomer Core and Supported Mass

Vibrations Analysis Of Sandwich Beams With Viscoelastic Core

Vibration characteristic analysis and experimental study of Biot constitutive model viscoelastic sandwich beams

Free vibration analysis and multi-objective optimization of lattice sandwich beams

Vibration and damping characteristics analysis of viscoelastic sandwich beams based on the shear dissipating energy assumption

Vibration and damping analyses of sandwich cylindrical and conical shells using meshfree method

A free vibration analysis of three-dimensional sandwich beams using hierarchical one-dimensional finite elements

A Compression Shear Mixed Finite Element Model for Vibration and Damping Analysis of Viscoelastic Sandwich Structures

Analysis of effect of variation of Honeycomb core cell size and sandwich panel width on the stiffness of a sandwich structure

The Impact Response of Clamped Sandwich Beams with Ordinary and Hierarchical Cellular Cores

Vibration and Buckling of Lattice Sandwich Structures

A homogenization method for natural frequencies and damping analysis of composite pyramidal lattice truss sandwich structures based on representative volume elements

Transverse vibration of viscoelastic sandwich beams based on the compression dissipating energy assumption