Abstract:Drinking water treatment residues (DWTR) have been regarded as a promising adsorbent for phosphorus control. The granulation of DWTR is a crucial step for its application in the filtration system. Traditional granulation processes could not achieve the balance between stable structures and adsorption capacities. Encapsulation of DWTR powders into alginate beads overcame these drawbacks. However, previous studies ignored the effect of preparation parameters on the properties of DWTR particles. In this study, the effects of sodium alginate (SA) concentrations, alginate types, Fe3+ concentrations, and gelation times on structures and mechanical stabilities of DWTR granules were investigated in depth based on their morphologies and pore structures, and compressive strength. The results showed that SA concentrations influenced the viscosity of DWTR-SA solution, and that granulation of DWTR with low SA concentration resulted in incomplete crosslinking, but granulation of DWTR with high SA concentration could change the shape of final granules. 2% SA was chosen as an optimum concentration for DWTR granules preparation. The ratios of M/G in SA affected the microstructures and mechanical strength of resultant granules. The presence of high G-block content in SA resulted in the formation of a dense crosslinking structure, which increased mechanical strength but decreased specific surface area. The morphologies of DWTR granules did not change as Fe3+ concentrations increased, and the granules with excellent mechanical strength were obtained at FeCl3 concentrations of 2% (w/v). The DWTR spheres could maturate quickly and are stable after 4 h. The resulting granular DWTR exhibited a comparable P adsorption capacity (26.89 mg-P/g) to the original powder, which was better than traditional P adsorption materials and pellet DWTR produced by high-temperature calcination. The results should be helpful for engineers to choose the best granulation parameters for their applications.

Effect of Lignosulphonates on the Properties of Dimethomorph 80% Water-dispersible Granules

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Structure and Properties of Sodium Lignosulfonate with Different Molecular Weight Used as Dye Dispersant

Effect of Molecular Weight on the Adsorption Characteristics of Lignosulfonates

The effect of anionic dispersants on the moisture distribution of a coal water slurry

Effects of Modified Sodium Lignosulfonate on Rheological Properties of Coal–Water Slurry with Low-Rank Coal

Effects of Chemical Structure on the Properties of Carboxylate‐type Copolymer Dispersant for Coal‐water Slurry

Multi-site sulfonation of lignin for the synthesis of a high-performance dye dispersant

Effect of Swelling Agent on the Molecular Weight of Poly(2,6‐dimethyl‐1,4‐phenylene Oxide) Synthesized in an Aqueous Medium

Modification of Sodium Lignosulfonate and Evaluation of its Potential Use as Detergent Builders

Lignosulphonates in zinc pressure leaching: Decomposition behaviour and effect of lignosulphonates' characteristics on leaching performance

DISPERSIBILITY MECHANISM AND SPRAY DRYING OF SiC AQUEOUS SLURRY

Effect of Dispersant on the Dispersibility of CaO–Al2O3-Based Mold Powder Slurry

Synthesis and Performance of Sulfonated Poly(styrene-Alt-maleic Anhydride) for Coal-Water Slurry: the Effect of Structure on Slurryability and Stability

Multiphasic lignocellulose-based suspension for oil-water interfacial stabilization: Synergistic adsorption and phase behavior

Synthesis of reticular long-carbon-chain polysiloxane and its hydrophobic modification of phosphogypsum-based materials

Effect of operating variables on functions of sodium alginate granules based on drinking water treatment residues

Effects of Molecule Weight on the Emulsifying Properties of Dodecenyl Succinic Anhydride Modified Glucuronoxylans

The Effect of PVP Molecular Weight on Dissolution Behavior and Physicochemical Characterization of Glycyrrhetinic Acid Solid Dispersions

Preparation of nano disperse dyes using sulfomethylated lignin: Effects of sulfonic group contents

Preparation and property analysis of polyacrylate dispersant for calcium carbonate