Abstract:This article presents two field-scale crash tests of Streetscape Vehicle Anti-Ram barrier systems and LS-DYNA simulations to predict the global response of each system under vehicular impact. Tests 1 and 2 consisted of a five-post welded bus stop and a welded bollard, respectively; both were in a steel and concrete composite foundation embedded in compacted American Association of State Highway and Transportation Officials aggregate. Test 1 resulted in a P1 rating, where minimal foundation uplift and rotation were observed. Test 2 failed to result in a P1 rating, where significant foundation uplift, rotation, concrete cracking, and large deformation of surrounding soil were observed. For each test, two LS-DYNA models, namely, a finite element method–only model and a hybrid finite element method–smoothed particle hydrodynamics model, were created to predict the global response of the system. In the finite element method–only model, traditional finite element method approach was used for the entire soil region; in the hybrid finite element method–smoothed particle hydrodynamics model, the near-field soil region was modeled using the smoothed particle hydrodynamics approach, whereas the far-field soil region was modeled using the finite element method approach. For Test 1, both the finite element method–only model and the hybrid finite element method–smoothed particle hydrodynamics model were able to match the recorded global response of the system. For Test 2, however, the finite element method–only approach was not able to accurately predict the global response of the system; on the other hand, the hybrid finite element method–smoothed particle hydrodynamics approach was able to capture the global response including the bollard pullout, soil upheaval, and vehicle override. This research suggests that the hybrid finite element method–smoothed particle hydrodynamics approach is more appropriate in simulating the field performance of embedded structures under impact loading when large deformation of the surrounding soil is expected.

A Study of Improving the Efficiency of Blocking Large Motor Vehicle

Test and Numerical Simulation of Truck Collision with Anti-Ram Bollards

Research on Modeling and Load Simulation Algorithm of Tracked Vehicle Braking System on Mu-Split Road Surfaces

A Novel Anti-Lock Braking Strategy for High Speed Light Weight Dual-Motor Electric Drive Tracked Vehicles

Dynamic Behaviors of Optimized K12 Anti-Ram Bollards.

The Simulation and Improvement of Automotive Body Crash Performance with Finite Element Method

Improvement of vehicle crashworthiness for full frontal impact based on energy flow analysis

Field Testing and Numerical Investigation of Streetscape Vehicular Anti-Ram Barriers under Vehicular Impact Using Fem-Only and Coupled Fem-Sph Simulations

Simulation and improvement of bus rollover against barrier

Improved Design of the Main Energy-Absorbing Automotive Parts Based on Traffic Accident Analysis

Hazard area assessment of vehicles running over vehicle security barriers using finite element method combined with stochastic analysis

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Development of a Runaway Vehicle Protective Barrier System Using Simulation and Full-Scale Crash Testing

Numerical Simulation of a Motorcycle to Road Barrier Impact

Integrated Post-Impact Planning and Active Safety Control for Autonomous Vehicles

Research on active collision avoidance algorithm for intelligent vehicle based on improved artificial potential field model

Integration of Active and Passive Safety Technologies--A Method to Study and Estimate Field Capability.

Improvement of energy-absorbing structures of a commercial vehicle for crashworthiness using finite element method

Studies on the capacity of vehicles at conflict points based on microscopic simulation

Design and Experimental Verification of Composite Impact Attenuator for Racing Vehicles

Discrete element method simulation of high-speed vehicle collisions with road barrier systems