Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Inverse dynamics control with acceleration optimization on a force-controlled bipedal robot

Speed control for under-actuated planar biped robot

Resolved-momentum-based real-time balance control for high-speed arm manipulation of humanoid robot

Stable walking control and strategy of under-actuated biped robot

Nonlinear MPC-Based Control Framework for Quadruped Robots: Touch-Down in Complex Terrain

Sprinting Motion Planning for Planar Bipedal Robots Based on Driving Coordination between the Knee and Ankle Joints

High Dynamic Position Control for a Typical Hydraulic Quadruped Robot Leg Based on Virtual Decomposition Control

Adaptive robust backstepping force control of 1-dof joint exoskeleton for human performance augmentation

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Inverse dynamics with rigid contact and friction

An MPC-DCM Control Method for a Forward-Bending Biped Robot Based on Force and Moment Control

An Optimization-Based Locomotion Controller for Quadruped Robots Leveraging Cartesian Impedance Control

Optimization-based dynamic motion planning and control for quadruped robots

Hybrid Zero Dynamics Control for Bipedal Walking with a Non-Instantaneous Double Support Phase

Balance and Walking Control for Biped Robot Based on Divergent Component of Motion and Contact Force Optimization

Partial Force Control of Constrained Floating-Base Robots

Zero Dynamics, Pendulum Models, and Angular Momentum in Feedback Control of Bipedal Locomotion

A Real-Time Planning and Control Framework for Robust and Dynamic Quadrupedal Locomotion

Inverse Dynamics Control of Compliant Hybrid Zero Dynamic Walking

Dynamically Stable 3D Quadrupedal Walking with Multi-Domain Hybrid System Models and Virtual Constraint Controllers