Abstract:Due to the extremely low Reynolds number, the mixing of substances in laminar flow within microfluidic channels primarily relies on slow intermolecular diffusion, whereas various rapid reaction and detection requirements in lab-on-a-chip applications often necessitate the efficient mixing of fluids within short distances. This paper presents a magnetic pillar-shaped particle fabrication device capable of producing particles with planar shapes, which are then utilized to achieve the rapid mixing of multiple fluids within microchannels. During the particle fabrication process, a degassed PDMS chip provides self-priming capabilities, drawing in a UV-curable adhesive-containing magnetic powder and distributing it into distinct microwell structures. Subsequently, an external magnetic field is applied, and the chip is exposed to UV light, enabling the mass production of particles with specific magnetic properties through photo-curing. Without the need for external pumping, this chip-based device can fabricate hundreds of magnetic particles in less than 10 min. In contrast to most particle fabrication methods, the degassed PDMS approach enables self-priming and precise dispensing, allowing for precise control over particle shape and size. The fabricated dual-layer magnetic particles, featuring fan-shaped blades and disk-like structures, are placed within micromixing channels. By manipulating the magnetic field, the particles are driven into motion, altering the flow patterns to achieve fluid mixing. Under conditions where the Reynolds number in the chip ranges from 0.1 to 0.9, the mixing index for substances in aqueous solutions exceeds 0.9. In addition, experimental analyses of mixing efficiency for fluids with different viscosities, including 25 wt% and 50 wt% glycerol, reveal mixing indices exceeding 0.85, demonstrating the broad applicability of micromixers based on the rapid rotation of magnetic particles.

High performance magnetically controllable microturbines.

Magnetically driven micro-optical choppers fabricated by two-photon polymerization.

Micromotors: Magnetically Modulated Pot‐Like MnFe2O4 Micromotors: Nanoparticle Assembly Fabrication and Their Capability for Direct Oil Removal (adv. Funct. Mater. 39/2015)

Self-Assembly of Superparamagnetic Magnetite Particles into Peapod-Like Structures and Their Application in Optical Modulation

Magnetic Control of Tubular Catalytic Microbots for the Transport, Assembly, and Delivery of Micro‐objects

Bimetallic Photo-Activated and Steerable Janus Micromotors as Active Microcleaners for Wastewater

Microtube Fabrication Based on Femtosecond Bessel Beam and Its Flexible Driving with External Magnetic Field

Magnetically Driven Rotary Microfilter Fabricated by Two-Photon Polymerization for Multimode Filtering of Particles.

Light-Driven Magnetic Encoding For Hybrid Magnetic Micromachines

Residence time distribution analysis of magnetic nanoparticle-enhanced mixing using time-dependent magnetic actuation in microfluidic system

Fabrication and manipulation for key elements of magnetic-driven speed-reduction micro-motor

Remote Manipulation of Micronanomachines Containing Magnetic Nanoparticles.

Magnetic and Meniscus-Effect Control of Catalytic Rolled-Up Micromotors

Printing Air-Stable High-Tc Molecular Magnet with Tunable Magnetic Interaction

Fabrication of Patterned Magnetic Particles in Microchannels and Their Application in Micromixers

Microscale Magnetic Field Modulation Using Rapidly Patterned Soft Magnetic Microstructures

Fabrication of shape-tunable micromotors based on mass transfer and phase separation

Magnetic polyurethane based composites as contactless valves in microfluidic applications

Hydrodynamic Rotating Motion of Micromotors from Femtosecond Laser Microfabrication

Printing Air-Stable High- T c Molecular Magnet with Tunable Magnetic Interaction

Dual-Mode-Driven Micromotor Based on Foam-like Carbon Nitride and Fe3O4 with Improved Manipulation and Photocatalytic Performance