Abstract:In this study, non-metallic materials of waste-printed circuit board powders (WPCBP) were successfully used as reinforcing filler to produce polypropylene (PP)-wood composites, and their effect on the weathering properties of PP composites were fully evaluated via oxidation induction time (OIT), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry, vicat softening point (VST), scanning electron microscopy, and mechanical properties analysis. The OIT analysis confirmed that the anti-thermal oxidative aging properties of PP-wood composites were decreased with the loading of WPCBP. Apart from that, the PP composite, reinforced with 30 wt.% of WPCBP, exhibited the highest value of active energy, which suggests that it is more sensitive to temperature and oxygen when compared with other PP composites. The mechanical properties analysis revealed that neat PP exhibited the poorest weathering properties after being subjected to UV exposure, and its retention rate of tensile strength and notched impact strength were only 70.6% and 59.6%, respectively, while WPCBP and wood flour (WF) could efficiently improve the retention rates of the mechanical properties of the PP composites when subjected to UV exposure. The visual appearance of the PP composites after being subjected to UV exposure showed more and smaller cracks with the loading of WPCBP and WF. The ATR-FTIR results revealed that the carbonyl index increased for all the weathered samples, and the more WPCBP was added into the PP composites led to a higher carbonyl index value, which might be due to the multivalent transition metals in WPCBP, which accelerate the photo-oxidation of the PP composites. The VST results show that both WPCBP and WF can effectively enhance the heat deformation resistance of the PP composites that have been subjected to UV exposure.

Study on Effects of Resin Types on Performances of WPC

Study on Heat Stability of Some Wood Fibers

Thermal Properties of Wood-Plastic Composites with Different Compositions

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Wood Plastic Composites: Their Properties and Applications

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Performance Analysis of Four Plant Fiber/Polyvinyl Chloride Composites under Two Degradation Conditions with Water or Seawater with Xenon Lamp

A Comprehensive Study On The Accelerated Weathering Properties Of Polypropylene-Wood Composites With Non-Metallic Materials Of Waste-Printed Circuit Board Powders

Superficial analysis of different wood polymer composites exposed to artificial weathering

Synthesis and Characterization of an Environmentally Friendly Phenol–Formaldehyde Resin Modified with Waste Plant Protein

STUDY ON PREPARATION AND PROPERTIES OF ANTI-ULTRAVIOLET AGING WOOD-PLASTIC COMPOSITES

The Effects of Lignin on the Thermal and Morphological Properties and Damage Mechanisms after UV Irradiation of Polypropylene Biocomposites Reinforced with Flax and Pine Fibres: Acoustic Emission Analysis

Study on Properties of Wood Fiber Reinforced Polypropylene Composites

A Review on Flexural Properties of Wood-Plastic Composites

Effect of Surface Coating and Plasma Treatment on Mechanical Properties of Wood Plastic Composites

Effects of wood fiber surface chemistry on strength of wood–plastic composites

Effects of the molding process on properties of bamboo fiber/epoxy resin composites

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

Interface Research of Wood/Plastic Composites Modified by Long Chain Segment Block Graft

Wood plastic composites based wood wall's structure and thermal insulation performance

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL