Abstract:The melt of crystalline polymers normally crystalize on cooling and the polymer melts with low critical cooling rate would easily solidify as glass during cooling to their glass transition temperature ( T g ). The glassy process exhibits variety within each kind of polymer melts in the slope of the viscosity-temperature visibility, and the rate of the excess conformational entropy in the polymer melt over the crystalline phase changes in the T g approaching. Polytrimethylene terephthalate (PTT) and a series of polytrimethylene terephthalate copolyesters (PTTG) with different molar ratios of 1,3-propylene glycol (1,3-PDO) to 1,4-cyclohexanedimethanol (1,4-CHDM) were synthesized to modify the chain flexibility and the critical cooling rate. The glassy samples were obtained via quenching the melts of PTT and copolymers below the T g to characterize the cold crystallization behaviors. The evolutions of the crystalline structure of the amorphous samples were in situ investigated via DSC and simultaneous WAXS/SAXS approaches during heating. The polymer chain dynamics and the critical cooling rates of the PTT and copolymers were estimated by rheological testing and DSC characterization. The results indicate that the chain conformation adjustment of PTT and copolymers is relate to the comonomers in the copolymers, and the cold crystallization behaviors can be divided into three temperature ranges during heating. The first involves rapid transition from a pre-ordered phase to a crystalline phase, the second is the adjustment of defects in an imperfect crystalline phase, and the third may refer crystal reorganization before melting. The crystallization ability of the samples could be due to the ability of chain conformation adjustment with comonomer content till the crystallization is no longer obvious during heating. The cold crystallization behaviors of the samples were discussed based on the polymer chain dynamics and it is convinced that would be helpful to understand the crystallization and processing of polymers.

Rapid Crystallization of Polycarbonate by Shock-Cooling and Freeze-Drying Method

Concentration Dependence of Crystallinity of Polycarbonate by Shock-Cooling and Subsequent Freeze-Drying of Its Various Solutions

Rapid Crystallization of Isotactic Polystyrene by Shock-Cooling and Subsequent Freeze-Drying of Its Very Dilute-Solution

Study on Preparation of Polycarbonate Micro-Particles by Liquid Anti-Solvent Crystallization

Making a Rapid Completion of Crystallization for Bisphenol A Polycarbonate by a Double-Layer Film Method

Fast DSC Applied to the Crystallization of Polypropylene

Vapor-Induced Crystallization Behavior of Bisphenol-A Polycarbonate

Rapid Crystallization of Isotactic Polystyrene from Large Molecule Solvent Octadecyl Benzoate

Highly Crystallizable Poly(ethylene Terephthalate) Prepared by Freeze-Extracting Solutions

Rapid Compression Induced Solidification of Two Amorphous Phases of Poly(ethylene Terephthalate)

Concentration Dependence of Crystalline Poly(Ethylene Terephthalate) Prepared by Freeze-Extracting Solutions

Primary and Secondary Crystallization of Fast-Cooled Poly(vinylidene Fluoride) Studied by Flash DSC, Wide-Angle X-ray Diffraction and Fourier Transform Infrared Spectroscopy

Enhanced Crystallization of Bisphenol A Polycarbonate in Thin and Ultrathin Films by Supercritical Carbon Dioxide

Acetone-induced crystallization behavior of polycarbonate

Progress in Solvent-induced Crystallization of Bisphenol-A Polycarbonate

Studies on the Synthesis of Polycarbonates. II

Crystal Morphology of High-Pressure Crystallized Bisphenol-A Polycarbonate

Solution Crystallization of Polycarbonate Surfaces for Hydrophobic State: Water Droplet Dynamics and Life Cycle Assessment towards Self-Cleaning Applications

Cold crystallization of polytrimethylene terephthalate and copolymers

Rapid preparation and continuous processing of polylactide stereocomplex crystallite below its melting point

Effect of transesterification on high-pressure crystallization behaviour of PET/PC blend system