Abstract:Since the 1960s, smog chambers have been an important tool for studying air pollution, and many indoor and outdoor smog chambers have been developed both domestically and internationally. However, all of these chambers are located at altitudes below 1500 m, only simulating atmospheric conditions in low-altitude plains. Moreover, most are made of polytetrafluoroethylene (PTFE), resulting in a higher wall deposition effect. To simulate the evolution of atmospheric pollution in high-altitude regions, we developed the world's highest-altitude quartz smog chamber, located in Kunming at an elevation of 1900 m. The chamber is a 3.375m3 cube constructed from 5 mm quartz glass and features controlled temperature (0 °C–40 °C) and relative humidity (2%–95%). We conducted a comprehensive characterization of the chamber, including tests for temperature and humidity stability, mixing stability, pressure resistance and sealing, light intensity measurement and environmental light matching, and background pollutant and wall loss assessments. The characterization results indicate excellent performance in simulating sunlight and controlling background pollutants. The NO2 photolysis rate is adjustable, ranging from 2.03 × 10−3s− 1 to 5.87 × 10−3s− 1 . Under dry conditions, after 6 h of photooxidation, the detected O3 formation rate was approximately 1.05 ppb/h, with a particulate mass concentration around 0.12 μg/m3. The reactor withstands pressures exceeding 1.5 bar, and at this pressure, the leak rate was measured at 1.1‰. Validation using the toluene-NO2 system showed that indoor mixing reached equilibrium in about 4 min. The wall loss rate for SWFU-HAP particles at 25 °C and RH <10% was 0.066 h− 1 , which is 70% lower compared to other chambers, while at RH = 50%, the wall loss rate was 0.137 h− 1 . These results demonstrate the superior performance of our system, meeting the high standards required for high-altitude vehicle exhaust aerosol emissions research and the investigation of the formation mechanisms of vehicle exhaust in high-altitude atmospheric environments.

Construction and Characterization of an Atmospheric Simulation Smog Chamber

Pilot Study Of Photochemical Reaction Under High Pmcontaminated Condition By Tsinghua Smog Chamber

Characterization of a New Smog Chamber for Evaluating SAPRC Gas-Phase Chemical Mechanism

A large-scale outdoor atmospheric simulation smog chamber for studying atmospheric photochemical processes: Characterization and preliminary application

Design and Characterization of A Smog Chamber for Studying Gas-Phase Chemical Mechanisms and Aerosol Formation

Investigation on Experiment System for Modeling of Photochemical Smog

Progress in Studies of Atmospheric Simulation Smog Chamber Facility

A Smog Chamber Facility for Qualitative and Quantitative Study on Atmospheric Chemistry and Secondary Organic Aerosol

A new smog chamber system for atmospheric multiphase chemistry study: design and characterization

Characterization of a smog chamber for studying formation of gas-phase products and secondary organic aerosol

The Simulations of Sulfuric Acid Concentration and New Particle Formation in an Urban Atmosphere in China

A New Type of Quartz Smog Chamber: Design and Characterization

Design and characterization of a new quartz smog chamber system for studying the atmospheric effects of vehicle emissions on plateaus

Photochemical Process Modeling and Analysis of Ozone Generation

Application of smog chambers in atmospheric process studies

Smog Chamber Study on the Role of NO x in SOA and O 3 Formation from Aromatic Hydrocarbons

Control of both PM<sub>2.5</sub> and O<sub>3</sub> in Beijing-Tianjin-Hebei and the surrounding areas

Second Organic Aerosol Formation by Irradiation of Α-Pinene-no X -H 2 O in an Indoor Smog Chamber for Atmospheric Chemistry and Physics

99/02776 Air quality in Beijing and its transition from coal burning caused problems to traffic exhaust related pollution

The Performance of a 100 M3 Outdoor Atmospheric Simulation Chamber in China

Atmospheric "haze Chemistry": Concept and Research Prospects