Abstract:We report a significant improvement of the output pulse energy of 46.9 nm laser obtained when we increase the amplitude of main current pulse from 27 to 45 kA. More importantly, we experimentally observed the impact of Ar discharge pressure and main discharge current on laser intensity and beam characteristics of 46.9 nm laser. When we increased the main current amplitude up to 45kA, the laser pulse energy increased to 1.55 mJ with its maximum value for newly employed larger diameter capillary. Here, we have performed symmetric measurements of the exit beam size and divergence of the 46.9 nm laser. The laser spots were captured over a broad range of discharge parameters. The laser beam divergence and spot size increased significantly as we increased Ar initial discharge pressure. At the same time, the spatial intensity distribution of the laser beam changed from a single peak pattern to a ring shape profile. These effects are results of increased refraction of the laser beam, caused by larger density gradients at higher initial Ar pressure inside the plasma column. Furthermore, the main discharge current was increased gradually to moderately increase the laser intensity and to improve the divergence and uniformity of the laser beam. The laser spots of 46.9 nm laser captured at different discharge pressures exhibit good cylindrical symmetry and support the experimental results of laser intensity. This study is conducted to advance the divergence and uniformity of the laser beam of a 46.9 nm discharge-pumped Ne-like Ar soft X-ray amplifier by reducing the plasma density gradients at the time of lasing. We have investigated, by using one-dimensional Magneto-hydrodynamics (MHD) simulations, the impact of main current pulse amplitude and discharge pressure of Ar on pinching time and plasma radius. The lasing and amplification are observed in 4.8 mm inner diameter aluminum channel having a length of 35 cm. This work presents a method to improve laser beam characteristics and laser pulse energy.

Research of Discharge Tube Diameter and Discharge Pressure on Fast-axial-flow CO2 Lasers

Optimization of Experimental Discharge Parameters to Increase the Arc Efficiency of the Bucket Ion Source

Influence of the Discharge Tube Aperture on the Deexcitation of Lower Level in UV Cu+ Laser

Kinetic analysis of the factors limiting the output power of the Ne–CuBr UV laser

The Research on Discharge Tube Structure of Fast-Axial-flow CO 2 Lasers

Progress of Research of Gas Circulation System in the High Power Fast Axial Flow CO2 Laser

Numerical Research of High Viscosity Phosphor Flow Field Distribution of High-Power LED Phosphor Coating Process

The influence of tube-plate electrodes on the laser mode of a fast-transvere- flow C02 laser

Optimization of Discharge Circuit of the Tea Co2 Laser with Two Discharge Channels

The Influence Of Tube-Plate Electrodes On The Laser Mode Of A Fast-Transverse-Flow Co(2) Laser

Optimization of efficiency of short-pulsed fast flow CO_2 laser amplifier with dual-band and multispectral lines

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Optimization of Three Gas Compositions in a CO2 Laser

Operation and Output Pulse Characteristics of a Discharge-Pumped 46.9 Nm Soft X-ray Laser with Larger Inner Diameter Capillary and Higher Discharge Currents

Research on Discharge and Radiation Characteristics of Multi-Electrode High Power Pulsed Xenon Flash Lamp

Analysis of Plasma Dynamics in He-Ne Lasers with Different Gas Ratios

A CFD Model for Fast-Axial-flow CO 2 Lasers

Study on Hydrodynamic Effects in Longitudinal Forced Convection for High Power Laser Amplifier

Study of optimization features of gas-powder jets created by a coaxial nozzle with divided powder supply during direct laser deposition of materials

A new longitudinal pumping scheme that uses elliptical laser beams to improve the compactness and efficiency of high-power dye lasers

Design and Numerical Analysis of an Inside-Beam Powder Feeding Nozzle for Wide-Band Laser Cladding