A Sustainable Electrochemical Method for the Production of Vanadium Pentoxide Using Bipolar Membrane Electrodialysis
Qinxiang Fang,Xinlai Wei,Haiyang Yan,Chenxiao Jiang,Yaoming Wang,Tongwen Xu
DOI: https://doi.org/10.1021/acs.iecr.2c01219
2022-01-01
Industrial & Engineering Chemistry Research
Abstract:Vanadium is an important soft metal that is widely used for various industrial sectors. However, the traditional ammonium precipitation of vanadium generates a large amount of waste salt, which is a great burden to the environment. In this study, an electrochemical method for the production of vanadium pentoxide was proposed using the bipolar membrane electrodialysis (BMED) technique. By precisely regulating the pH and vanadium salt concentration, the vanadate salt, predominantly V2O74-, could migrate through the anion-exchange membrane and combine with protons generated by water splitting in the bipolar membrane. The effects of current density, initial NaVO3 concentration, and volume ratio between the acid and salt chambers on the BMED performances were investigated. It was found that successful completion of the experiment was highly dependent on the migration of V2O74- and the generation of H+/OH- by water splitting in the bipolar membrane. The competition between OH- and V2O74- across the anion-exchange membrane is advantageous to help the acid compartment to become not too much acidic but is also a disadvantage to the vanadium BMED performance. Additionally, the quick supply of protons or the fast migration of vanadate might lead to the easy conversion of the polyvanadate H2V10O234- into the suspended solid V2O5. Under the current density of 30 mA/cm(2), the NaVO3 concentration of 0.3 mol/L, and the volume ratio between acid and salt compartments of 1:2, the vanadium concentration in the acid chamber reached 0.168 mol/L with the conversion rate of 17.29%. The energy consumption could be as low as 13.52 kWh/kg V2O5. The purity of the V2O5 product via the BMED method was 98.05%, which meets the industrial standards for practical use. Therefore, the proof-of-concept experiment well proved that BMED is capable of one-step converting the vanadium salt into vanadate acid, creating possibilities for the avoidance of the vanadium ammonium precipitation procedure.