Trivalent Chromium Ion Adsorption on Various Types of Wastewater Sludge

N. Faout,S. K. Brar,M. Verma,R. D. Tyagi,J. F. Blais,R. Y. Surampalli
DOI: https://doi.org/10.1061/(asce)1090-025x(2008)12:3(181)
2008-01-01
Abstract:This research aimed at evaluating the adsorption of trivalent chromium present in high concentrations [about 100–170mgCr(III)L−1] in effluents on various types of wastewater sludges, namely, primary sludge (PWS), secondary sludge (SWS), mixed sludge (primary+secondary) (MWS), physicochemical treatment sludge (CWS), and agro-processing industry sludge (AWS). Adsorption tests of chromium were carried out at 25±1°C in 500mL Erlenmeyer flasks at various adsorbent concentrations (2, 5, 10, 15, 20, and 30gL1) for all types of sludges studied (PS, SWS, MWS, CWS, and AWS). A synthetic chromium nitrate [Cr(NO3)3⋅9H2O] solution adjusted to pHi=3.2 at 112mgL−1 was used. The results revealed that CWS had the best adsorption capacity for chromium, followed by SWS, and adsorption capacity of the different wastewater sludges was in the following order: CWS>SWS⩾MWS>PWS>AWS. Kinetic adsorption studies also showed that almost complete removal of chromium in solution was reached in the first 2h of reaction with all types of sludges. Finally, the adsorption tests of chromium on tannery effluent ([Cr]i=143mgL−1) confirmed the effectiveness of SWS for the removal of chromium. A removal yield of 40.8% of chromium was observed following 2.0h of adsorption on 5.0gL−1 of SWS at a pHi=3.94. The quantity of chromium adsorbed on sludge during these tests corresponded to a load of 11.6mgCrg−1 dry weight.
What problem does this paper attempt to address?