Abstract:In seasonally frozen regions, concrete pavement is exposed to cycles of freeze-thaw and erosion from de-icing salt, which can lead to unfavorable service conditions and vulnerability to damage. This paper examines the compressive strength, flexural-tensile strength, abrasion resistance, permeability, and spacing factor of concrete, taking into account the impact of various curing conditions, de-icing salt solutions, and mass fractions on the concrete's freeze-thaw resistance. Two test methods, the single-face method and the fast-freezing method, were used to comparatively analyze the freeze-thaw resistance of concrete. The analysis was based on the surface scaling, water absorption rate, mass loss rate, relative dynamic elastic modulus, and relative durability index. The results indicate that the presence of salt solution significantly worsened the degree of concrete damage caused by freeze-thaw cycles. The use of freeze-thaw media, specifically sodium chloride (), calcium chloride (), and potassium acetate () at mass fractions of 5%, 4.74%, and 5%, respectively, had the greatest impact on the surface scaling of concrete. However, their effect on the water absorption rate was inconsistent. When the freeze-thaw medium was water, the concrete's relative dynamic elastic modulus and relative durability index were 9.6% and 75.3% higher, respectively, for concrete cured in 20 °C—95% RH conditions compared to those cured in 0 °C—50% RH conditions. We propose a comprehensive relative durability index () by combining the results of two methods of freeze-thaw tests. The of concrete cured in 0 °C—50% RH conditions was 83.8% lower than that of concrete cured in 20 °C—95% RH conditions when exposed to a freeze-thaw medium of 5% mass fraction solution. To evaluate the salt freeze-thaw resistance of concrete pavement, it is recommended to use surface scaling and together.

Study of Frost Resistance on Air-Entrained Concrete in Sulfated Medium

Experimental Study and Mechanism Analysis on Frost Resistance of Normal Performance Concrete under Different Environments

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Study on the Frost Resistance of Composite Limestone Powder Concrete against Coupling Effects of Sulfate Freeze–Thaw

Environmental Factors Influencing The Durability Of Concrete Structures In Frost Environments

Meso-Scale Mechanical Deterioration Of Mortar Subjected To Freeze Thaw Cycles And Sodium Chloride Attack

Frost resistance of concrete mixed with nano-silica in severely cold regions

The Influence of Freeze–Thaw Cycles and Corrosion on Reinforced Concrete and the Relationship between the Evolutions of the Microstructure and Mechanical Properties

Multi-scale Thermo-Poro-mechanical Simulation of the Frost Resistance of Low-Heat and Moderate-Heat Hydraulic Concrete Considering the Aging Microstructure

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Estimation of Ice Formation in Mortar Saturated with Sodium Chloride Solutions

Study on the Freeze-Thaw Resistance of Concrete Pavements in Seasonally Frozen Regions

Frost Resistance and Microscopic Properties of Recycled Coarse Aggregate Concrete Containing Chemical Admixtures

Sulfate erosion investigation on FRP-confined concrete in cold region

Influence of Combined Air-Entraining Superplasticizer and Surface Treatments on Airport Pavement Concrete Against Salt Freezing

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Microstructure and life prediction model of steel slag concrete under freezing-thawing environment

Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack

Experimental research on durability of high-performance synthetic fibers reinforced concrete: Resistance to sulfate attack and freezing-thawing