Modeling Of Melting Enthalpy Of Organic Nanowires

Lh Liang,Jc Li,Q Jiang

DOI: https://doi.org/10.1002/pssb.200301651

2003-01-01

Abstract:A model is developed to interpret size-dependent melting enthalpy of nanocrystals based on consideration of the effect of surface bond number and bond strength on cohesive energy of crystals and the corresponding liquids. The model prediction corresponds to the experimental results of organic nanowires well.

What problem does this paper attempt to address?

Modeling Cohesive Energy and Melting Temperature of Nanocrystals

WH Qi,MP Wang,M Zhou,XQ Shen,XF Zhang

DOI: https://doi.org/10.1016/j.jpcs.2005.12.003

IF: 4.383

2006-01-01

Journal of Physics and Chemistry of Solids

Abstract:A model has been developed to account for the size dependent cohesive energy and melting temperature of nanocrystals. This model can deal with the thermodynamic properties of nanoparticles (spherical and non-spherical), nanowires and nanofilms with free surface or non-free surface (embedded in a matrix). The cohesive energy depression of nanocrystals has been predicted, and the conditions of superheating are obtained. It is found that the present theoretical results are consistent with the available experimental values.
Melting Thermodynamics of Organic Nanocrystals

Q Jiang,HX Shi,M Zhao

DOI: https://doi.org/10.1063/1.479489

1999-01-01

Abstract:The size-dependent melting temperature and the size-dependent melting entropy of organic nanocrystals are predicted by use of our simple model being free of any adjustable parameter. The model predictions for the size-dependent melting temperature and the size-dependent melting entropy are supported by the experimental results on benzene, chlorobenzene, heptane, and naphthalene nanocrystals.
MODELING THE MELTING TEMPERATURE OF METALLIC NANOWIRES

Y. J. Li,Weihong Qi,Baiyun Huang,M. P. Wang,Shiyun Xiong

DOI: https://doi.org/10.1142/s0217984910024699

2010-01-01

Modern Physics Letters B

Abstract:A model is developed to account for the size-dependent melting temperature of pure metallic and bimetallic nanowires, where the effects of the contributions of all surface atoms to the surface area, lattice and surface packing factors and the cross-sectional shape of the nanowires are considered. As the size decreases, the melting temperature functions of pure metallic and bimetallic nanowires decrease almost with the same size-dependent trend. Due to the inclusion of the above effects, the present model can also be applied to investigate the melting temperature depression rate of different low-dimensional system, accurately. The validity of the model is verified by the data of experiments and molecular dynamics simulations.
Modelling of the Melting Temperature of Nano-Ice in MCM-41 Pores

Q. Jiang,Lihong Liang,Ming‐Chun Zhao

DOI: https://doi.org/10.1088/0953-8984/13/20/101

2001-01-01

Journal of Physics Condensed Matter

Abstract:The melting temperature of nano-ice confined in micropores of MCM-41 is predicted by use of our simple model based on the Lindemann criterion. The model takes into consideration the density of the OH bonds of MCM-41 pores; its prediction is consistent with the experimental results for the melting temperature of nano-ice. The applicability of the Gibbs-Thompson equation to nanocrystals in the mesoscopic size range is compared with that of our model and a modification of that same equation is compared with our model.
Finite Size Effect on Melting Enthalpy and Melting Entropy of Nanocrystals

Z Zhang,Xx Lu,Q Jiang

DOI: https://doi.org/10.1016/s0921-4526(99)00199-4

1999-01-01

Abstract:It is demonstrated that a simple model, free of any adjustable parameter, can be developed for the melting enthalpy and melting entropy of nanocrystals based on Mott's equation for the melting entropy and a model for the size-dependent melting temperature. It is shown that the enthalpy and entropy of melting for a nanocrystal decrease as its size decreases. The results are supported by available experimental results on metallic and organic nanocrystals. The model suggests that the size-dependent melting enthalpy and melting entropy for non-semiconductor nanocrystals are determined by the vibrational component of overall melting enthalpy and entropy.
Superheating thermodynamics of nanocrystals based on the interface effect

L.H Liang,J.C Li,Q Jiang

DOI: https://doi.org/10.1016/S0921-4526(02)01183-3

2002-01-01

Abstract:In terms of consideration on binding energy of interface atoms and Mott's expression for vibrational melting entropy, a model to interpret size-dependent melting enthalpy and size-dependent melting point of low-dimensional nanocrystals embedded in a matrix is developed. It is found that as the size of the nanocrystals decreases, both of the melting enthalpy and the melting temperature increases under the condition that the nanocrystals have coherent or semi-coherent interface with the matrix. The model prediction is in good agreement with experimental data and computer simulation results.
Modelling for Size-Dependent and Dimension-Dependent Melting of Nanocrystals

Z Zhang,Jc Li,Q Jiang

DOI: https://doi.org/10.1088/0022-3727/33/20/318

2000-01-01

Abstract:A unified model, free of any adjustable parameters, for the size-dependence and dimension-dependence of melting point depression and superheating of nanocrystals is developed. In terms of the consideration of the surface/volume ratio of nanocrystals, the suppression of melting point of nanocrystals and superheating of embedded nanocrystals are predicted. The model predictions for the melting temperatures of nanocrystals are consistent with the experimental results and molecular dynamics simulations.
Melting enthalpy depression of nanocrystals

Q Jiang,C.C Yang,J.C Li

DOI: https://doi.org/10.1016/S0167-577X(02)00667-5

IF: 3

2002-01-01

Materials Letters

Abstract:A model, free of any adjustable parameters, for the size-dependence of melting enthalpy of nanocrystals is developed. The model predictions for the depressions of both melting point and melting enthalpy of In nanocrystals are consistent with the latest calorimetric experimental results. The model shows that although melting temperature has an approximate linear relationship with reciprocal of radius of nanocrystals, there is a divergence from the linearity for the melting enthalpy especially when radius of the nanocrystals decreases to mesoscopic size range.
Melting and Superheating of Nanocrystals

蒋青,梁立红

DOI: https://doi.org/10.3969/j.issn.1006-6055.2002.06.010

2002-01-01

Abstract:A simple model for size-dependent melting temperature and melting entropy of nanocrystals is introduced. The model predicts not only the melting temperature and the melting entropy depression for free-standing nanocrystals with reducing size, but also the melting temperature and the melting entropy enhancement for embedded nanocrystals in matrix with reducing size. The model is supported by available experimental results of nanoparticles, nanowires and thin films.
Molecular Dynamics Simulations for Melting of Palladium Nanoclusters and Nanowires

Ling Miao,Venkat R. Bhethanabotla,Babu Joseph

2004-01-01

Abstract:We present results from a molecular dynamics simulation study of a Pd cluster and a nanowire, both of 2.3 nm diameter, using the Sutton_Chen manybody potential function. Changes in thermodynamic and structural properties of these two systems during heating were studied. We found that the melting temperature of the Pd nanowire of 1200 K is lower than the simulated bulk value (1760 K) but higher than that of the cluster at 1090 K. Melting behaviors were characterized by a number of thermodynamic, structural and dynamical parameters. Surface pre-melting at much lower temperatures than the near first order transition temperatures noted above was observed in both Pd systems. The surface premelting temperature range was higher for the nanowire than for the cluster. Surface melting in nanowires manifests itself as large amplitude vibrations followed by free movement of atoms in the plane perpendicular to the nanowire axis, with axial movement arising at temperatures closer to the transition temperature. Increase in nanowire diameter as well as shape change are seen to result from this axial mixing. Atomic distributions indicated that the nanowire could undergo mechanical instabilities and break upon heating. Bond order parameters indicated that the nanocluster retained the initial fcc structure, whereas, the nanowire tended towards the hcp structure. Simple melting theories could not explain the actual depression of the melting point in both systems.
Melting thermodynamics of nanocrystals embedded in a matrix

Q. JIANG,Z. ZHANG,J. C. LI

DOI: https://doi.org/10.1016/S1359-6454(00)00271-8

IF: 9.4

2000-01-01

Acta Materialia

Abstract:A simple model, free of any adjustable parameter, is established for the melting temperature and melting entropy of nanocrystals embedded in a matrix where the interface between the nanocrystals and the matrix is coherent. The model is based on Lindemann's criterion for the melting, Mott's equation for the melting entropy of bulk crystals and our model for the size-dependent melting temperature. It is shown that the melting temperature and the melting entropy of nanocrystals embedded in a matrix increase as the size of the nanocrystals decreases. The above predictions are supported by available experimental results on Pb and In nanocrystals embedded in an Al matrix. On the basis of the model, the melting mechanism of superheating is discussed.
A comprehensive understanding of melting temperature of nanowire, nanotube and bulk counterpart.

Gang Ouyang,Guowei Yang,Guanghui Zhou

DOI: https://doi.org/10.1039/c2nr30095h

IF: 6.7

2012-01-01

Nanoscale

Abstract:Surface energies of nanostructures are of considerable interest, and thermodynamic methods have provided valuable insight into the physics and chemistry of these systems. Although the effect of surface energy on melting behaviors of nanostructures has been widely investigated in theoretical calculations and simulations, from the thermodynamics at the nanometer scale point of view, the comprehensive understanding of the fundamental physical and chemical issues involved in nanostructures' melting is still lacking. For instance, nanostructures with negative curvature, such as nanotubes, show different melting behaviors compared with the nanostructures with positive curvature such as nanowires, and both nanotubes and nanowires exhibit abnormal melting temperature compared with that of the bulk counterparts. Herein, we put forward a general model to elucidate the melting temperature of the nanostructures with positive and negative curvatures based on the surface energy at the nanometer. Further, the surface mean square relative atomic displacement (MSRD) of these nanostructures has been studied from the perspective of the size-dependent cohesive energy consideration, which can provide the atomic understanding of the nanostructures' melting. Theoretical analyses indicate that both melting temperatures of the nanostructures with the positive and negative curvatures decrease with decreasing dimensionality, and the surface MSRDs show different size effects in the systems with the positive and negative curvatures, respectively. The melting temperature of the surface with the negative curvature is higher than that of the surface with the positive curvature, and both melting temperatures are smaller than that of the bulk counterpart when the size of nanostructures is less than a threshold value. The unique melting behaviors of nanostructures are attributed to the size-and curvature-dependent surface energy of nanostructures. These results provide new insight into the fundamental understanding of the melting temperature of nanostructures.
Surface Deformation-Dependent Mechanical Properties of Bending Nanowires: an Ab Initio Core-Shell Model

Xiao Ye,Queensland University of Technology,Kou L. Z.,Li Chun

DOI: https://doi.org/10.1007/s10483-022-2814-6

2022-01-01

Applied Mathematics and Mechanics

Abstract:An ab initio core-shell model is proposed to evaluate the surface effect in bending nanowires, in which the elastic modulus depends on the surface relaxation and deformation induced by external loading. By using first-principles calculations based on the density functional theory (DFT), the surface and bulk properties are calculated for Ag, Pb, and Si nanowires. The obtained theoretical predictions of the effective Young’s modulus of nanowires agree well with the experimental data, which shows that the fixed-fixed nanowire is stiffened and the cantilevered nanowire is softened as the characteristic size of the cross section decreases. Furthermore, the contrastive analysis on the two kinds of nanowires demonstrates that increasing the nanowire aspect ratio would enhance the surface effect. The present results could be helpful for understanding the size effect in nanowires and designing nanobeam-based devices in nanoelectromechanical systems (NEMSs).
Size- and Coherence-Dependent Thermodynamic Properties of Metallic Nanowires and Nanofilms

W. H. Qi

DOI: https://doi.org/10.1142/s0217984906012092

2006-01-01

Modern Physics Letters B

Abstract:A model is developed to account for the size- and coherence-dependent cohesive energy, melting temperature, melting enthalpy, vacancy formation energy and vacancy concentration of nanowires and nanofilms. It is found that the variation direction (increasing or decreasing) of the thermodynamic properties is determined by the coherent interface, and the quantity of variation depends on the crystal size. The calculated results on Pb nanowires and nanofilms are consistent with the available experimental values.
Melting of Pd Clusters and Nanowires: A Comparison Study Using Molecular Dynamics Simulation

L Miao,VR Bhethanabotla,B Joseph

DOI: https://doi.org/10.1103/physrevb.72.134109

2005-01-01

Abstract:We present results from a molecular dynamics simulation study of a Pd cluster and a nanowire of the same diameter using the Sutton-Chen many body potential function. Changes in thermodynamic and structural properties of these two systems during heating were studied. We found that the melting temperature of the Pd nanowire of $1200\phantom{\rule{0.3em}{0ex}}\mathrm{K}$ is lower than the simulated bulk value $(1760\phantom{\rule{0.3em}{0ex}}\mathrm{K})$ but higher than that of the cluster at $1090\phantom{\rule{0.3em}{0ex}}\mathrm{K}$. Melting behaviors were characterized by a number of thermodynamic, structural, and dynamical parameters. Surface premelting at much lower temperatures than the near first-order transition temperatures noted above was observed in both Pd systems. The surface premelting temperature range was higher for the nanowire than for the cluster. Surface melting in nanowires manifests itself as large amplitude vibrations followed by free movement of atoms in the plane perpendicular to the nanowire axis, with axial movement arising at temperatures closer to the transition temperature. Increase in nanowire diameter as well as shape change is seen to result from this axial mixing. Bond-orientational order parameters indicated that the nanocluster retained the initial fcc structure at low temperatures. The nanowires, however, were seen to be stable at a solid structure that was close to hcp as established by bond-orientational order parameter calculations. Melting point depressions in both systems agree better with a liquid-drop model than with Pawlow's thermodynamic model.
Thermal stability of low dimensional crystals

Q Jiang,Z Zhang,Y.W Wang

DOI: https://doi.org/10.1016/S0921-5093(00)00718-8

2000-01-01

Abstract:A model, free of any adjustable parameter, has been developed for the size-dependent melting temperature and melting entropy of nanocrystals. The model can be utilized to predict the thermal stability both for metallic and organic low dimensional materials. The results show that their melting thermodynamic functions are dependent on their size, dimension, and environment. The theoretical predictions in terms of the above model are fully consistent with experimental evidences and the results of molecular dynamics simulation.
Size and Shape Dependent Melting Temperature of Metallic Nanomaterials.

Xianhe Zhang,Weiguo Li,Dong Wu,Yong Deng,Jiaxing Shao,Liming Chen,Daining Fang

DOI: https://doi.org/10.1088/1361-648x/aaf54b

2018-01-01

Journal of Physics Condensed Matter

Abstract:This study aims to characterize the size and shape dependent melting temperature of nanomaterials. Considering that surface atoms and interior atoms affect the melting of materials in different manners, we thus define an equivalent relationship between the contribution of surface atoms and interior atoms. Based on this definition, a criterion of melting is proposed through introducing a critical energy storage density of melting, the sum of the contribution of surface atoms and the interior atoms. According to the proposed criterion, a new theoretical model without any adjustable parameters is developed to characterize the size effect of melting temperatures of nanomaterials. The model predictions are in good agreement with the available experimental data or molecular dynamics simulations. This model uncovers the quantitative relationship between the melting temperature, size, atomic diameter and shape of nanomaterials. In addition, this model is extended to predict the size dependent glass transition temperatures of polymers. This study can help to better understand and characterize the size dependent melting temperatures of nanomaterials, as well as the size dependent glass transition temperatures of polymers.
A Molecular Dynamics Study on the Melting of Silver Nanowires

PAN Chun-ling,WEN Yu-hua,ZHU Zi-zhong

DOI: https://doi.org/10.3321/j.issn:0438-0479.2007.04.009

2007-01-01

Abstract:The melting processes of silver nanowires with different sizes were studied using molecular dynamics simulations with the quantum Sutten-Chen many-body force field.The present calculations indicated that the melting temperatures of silver nanowires were much lower than that of silver bulk,showing a strong dependence on the size of the nanowires.The melting temperatures were linear with the reciprocal of the diameter of the nanowire.The melting process first occured at the edges of the nanowires,and then spreaded to the core region.When nanowires were heated up above the melting temperatures,they would melt gradually,then break,and finally lead to the formation of the spherical clusters.
The size-shape dependent Debye temperature, melting entropy and melting enthalpy theoretical models for metallic nanomaterial

Xianhe Zhang,Weiguo Li,Dong Wu,Hechen Xu,Yong Deng

DOI: https://doi.org/10.1016/j.mseb.2023.116777

2023-01-01

Abstract:•Proposed size shape dependent Debye temperature, melting enthalpy & entropy models.•These models do not require any fitting parameters.•Only the Debye temperature, melting enthalpy & entropy of bulk materials are needed.•Models are more superior because of computational simplicity & reasonable results.
EQUIVALENT MODEL ON MELTING AND SUPERHEATING OF METALLIC NANOCRYSTALS

D Xie,MP Wang,WH Qi,LF Cao

DOI: https://doi.org/10.3321/j.issn:0412-1961.2005.05.002

IF: 1.797

2005-01-01

ACTA METALLURGICA SINICA

Abstract:A simple but practical model for the melting and superheating of metallic nanocrystals was presented on the basis of Hill thermodynamic theory for small systems and our equivalent model for cohesive energy and corresponding melting thermodynamics. The model predicts that with increasing surface-to-volume atomic ratio, the melting temperature and melting entropy of free-standing nanocrystals will decrease while the above two parameters for the embedded nanocrystals will increase, and the conditions of supercooling and superheating of nanocrystals are discussed as well. The theoretical predictions on the variations of the above two parameters of metallic nanoparticles, nanowires and nanofilms are in agreement with the present experimental results.

Modeling Of Melting Enthalpy Of Organic Nanowires

Modeling Cohesive Energy and Melting Temperature of Nanocrystals

Melting Thermodynamics of Organic Nanocrystals

MODELING THE MELTING TEMPERATURE OF METALLIC NANOWIRES

Modelling of the Melting Temperature of Nano-Ice in MCM-41 Pores

Finite Size Effect on Melting Enthalpy and Melting Entropy of Nanocrystals

Superheating thermodynamics of nanocrystals based on the interface effect

Modelling for Size-Dependent and Dimension-Dependent Melting of Nanocrystals

Melting enthalpy depression of nanocrystals

Melting and Superheating of Nanocrystals

Molecular Dynamics Simulations for Melting of Palladium Nanoclusters and Nanowires

Melting thermodynamics of nanocrystals embedded in a matrix

A comprehensive understanding of melting temperature of nanowire, nanotube and bulk counterpart.

Surface Deformation-Dependent Mechanical Properties of Bending Nanowires: an Ab Initio Core-Shell Model

Size- and Coherence-Dependent Thermodynamic Properties of Metallic Nanowires and Nanofilms

Melting of Pd Clusters and Nanowires: A Comparison Study Using Molecular Dynamics Simulation

Thermal stability of low dimensional crystals

Size and Shape Dependent Melting Temperature of Metallic Nanomaterials.

A Molecular Dynamics Study on the Melting of Silver Nanowires

The size-shape dependent Debye temperature, melting entropy and melting enthalpy theoretical models for metallic nanomaterial

EQUIVALENT MODEL ON MELTING AND SUPERHEATING OF METALLIC NANOCRYSTALS