Abstract:In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased the incidence of carboxylic acid groups not only at initial defect sites but also at newly created defect sites along the walls of SWNTs. Compared to the two oxidants above, when KMnO4 in alkali was used as the oxidant, which is relatively mild, different amounts of −OH, −CO, and −COOH groups were introduced. The oxidation processes begin mainly with the oxidation of the initial defects that arise during the CVD growth of the SWNTs and are accompanied by processes that can be roughly divided into two steps: (1) the defect-generating step and (2) the defect-consuming step. Specifically, during the defect-generating step, the oxidants attack the graphene structure by electrophilic reactions and generate active sites such as −OH and −CO. This step depends on the oxidant's ability to generate −C−OH groups and to transform them into −CO groups. During the defect-consuming step, the graphene structure of the tube was destroyed by the oxidation of the generated active sites in step 1. The defect-consuming step mostly counts on the ability of the oxidant to etch/destroy the graphite-like structure around the already generated −CO and their neighborhood groups.

Characterization of acid-treated carbon nanotube thin films by means of Raman spectroscopy and field-effect response

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Electron Spin Resonance Study on Acid Treatment of Carbon Nanotube

Single Carbon Fiber/Acid-Treated CNT-Epoxy Composites by Electro- Micromechanical Technique and Wettability Test for Dispersion and Self-Sensing

Influence of acid treating on texture and structure of carbon nanotubes

Mechanism of surface treatments on carbon nanotube transparent conductive films by three different reagents

Structural Characterization for Carbon Nanotubes Treated with Concentrated Nitric Acid

Nanotube and Nanowire Transistors

Structural, Electrical, and Optical Properties of Single-Walled Carbon Nanotubes Synthesized through Floating Catalyst Chemical Vapor Deposition

The Effect of Acidic Treatment on the Lithium Storage Capacity of Multi-Walled Carbon Nanotubes

Interaction of solid organic acids with carbon nanotube field effect transistors

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Directly Correlating the Strain-Induced Electronic Property Change to the Chirality of Individual Single-Walled and Few-Walled Carbon Nanotubes

Raman microscopy mapping for the purity assessment of chirality enriched carbon nanotube networks in thin-film transistors

Electrochemical identification of metallic and semiconducting single-walled carbon nanotubes using the water gate effect.

Influence of Acid Treatments of Carbon Nanotube Precursors on Ni/Cnt in the Synthesis of Carbon Nanotubes

Radio-Frequency Characterization for the Single-Walled Carbon Nanotubes

Selective Small-Diameter Metallic Single-Walled Carbon Nanotube Removal by Mere Standing with Anthraquinone and Application to a Field-Effect Transistor

Influence of Heat Treatment on Field Emissive Properties of Single-Walled Carbon Nanotubes

Studies on Fluorescent Properties of Multi-Walled Carbon Nanotubes Before and after Concentrated Nitric Acid Treatment

Wet Purification of Aligned Carbon Nanotube Arrays and Its Impact on the Morphology of the Carbon Nanotube Arrays