Abstract:In this paper, Zr, Cr and V were selected as the partial substitution elements for Ti to form Mg35Ti5M5Ni55 quaternary alloys prepared by means of mechanical alloying on the basis of the ternary Mg35Ti10Ni55 electrode alloy previously studied by the authors. It is found that all the three quaternary alloys possess an amorphous main phase and exhibit improved cycling stability than the original ternary Mg35Ti10Ni55. The Zr-substituted alloy has also a higher discharge capacity. X-ray photoelectron spectroscopy (XPS) surface analysis reveals that on the surface of each alloy a multi-component oxide composite film is formed, which is more compact and corrosion resistant than the Mg(OH)2 film and the (TiO2)x(NiO)y(Mg(OH)2)z composite films reported previously. Auger electron spectroscopy (AES) analysis shows that the substituting elements tend to reduce the thickness of the passivation films. The thickness of composite oxide film on the alloys is in the following order: Mg35Ti10Ni55>Mg35Ti5V5Ni55>Mg35Ti5Zr5Ni55>Mg35Ti5Cr5Ni55. The result agrees well with that of the polarization resistances (RP) values obtained from the electrochemical impedance spectroscopy (EIS) Nyquist diagrams. It demonstrates that the thicker the passivation film is, the higher the RP is and the more difficultly the charge transfer reaction proceeds. Anodic polarization curves indicate that the addition of Cr and Zr decreases effectively the corrosion current. However, the corrosion of the electrode alloys in the electrolyte is still high and proceeds constantly as the corrosion current remains almost constant during further cycles.

Effects of Fluorination of AB2-type Alloys and of Mixing with AB5-type Alloys on the Charge–discharge Characteristics

Improvement of the electrochemical properties of Zr-based AB2 alloys by an advanced fluorination technique

Effects of Modified Fluorination Treatment on Structural and Electrochemical Characteristics of Ab(2)-Type Laves Phase Alloy

Effects Of Fluorination Temperature On Surface Structure And Electrochemical Properties Of Ab(2) Electrode Alloys

Surface Passivation of Metal Hydrides For Applications

Kinetic And Equilibrium Properties Of The Fluorinated Laves-Phase Hydriding Alloys

Structural and Electrochemical Characterization of Fluorinated AB2-type Laves Phase Alloys Obtained by Different Pulverization Methods

Fluorination mechanism and its effects on the electrochemical properties of metal hydrides

Effects of surface structure of fluorinated AB2 alloys on their electrodes and battery performances

Electrochemical properties and characteristics of a fluorinated AB2-alloy

Effects of heat-treatment temperature on microstructure and electrochemical properties of AB5 type MlNi 3.60Co 0.85Mn 0.40Al 0.15 hydride electrode alloy

The Effects of Partial Substitution of Mn by Cr on the Phase Structure, Microstructure and Electrochemical Properties of Ti-Zr-V-Mn-Ni Hydrogen Storage Alloys

The effect of Hf content on the phase structures and electrochemical properties of V2.1TiNi0.5Hfx (x=0–0.25) hydrogen storage alloys

The effect of partial substitution of Ti with Zr, Cr or V in the Mg35Ti10Ni55 electrode alloy on its electrochemical performance

A wet ball milling treatment of Zr-based AB2 alloys as negative electrode materials

Effects of Annealing Treatment on Microstructure and Electrochemical Performances of Co-free MlNi4.0Al0.3Si0.1Fe0.6 Hydrogen Storage Alloy

Effect of preparation process on electrochemical performances of AB5-Type high capacity hydrogen storage alloys

Microstructure and Electrochemical Properties of V_(2.1)TiNi_(0.4)Zr_(0.06)Cu_(0.03)M_(0.10)(M=Cr, Co, Fe, Nb, Ta) Hydrogen Storage Alloys

The effects of mechanical grinding on the hydrogen storage properties of MlNi4.7Al0.3 alloy

Improvement of electrochemical cyclic durability of Zr-based AB2 alloy electrodes

RESEARCH AND DEVELOPMENT ON HIGH PERFORMANCE HYDRIDE ELECTRODE ALLOYS