Preliminary study of channel steel-concrete composite beam and application

Nie Jianguo,Wu Lili,Fan Jiansheng,Lü Jianfeng

DOI: https://doi.org/10.3321/j.issn:1000-131X.2008.11.012

2008-01-01

Abstract:A new type of channel(U-shape)section(steel-concrete)composite girder bridge is presented.It is a component that concrete is cast at the interior of the steel-concrete channel section steel beam prefabricated from steel plates,and the steel plates and the concrete are integrated through shearing connectors and work together.While inheriting the characteristics of traditional concrete channel beams,this type of structure possesses its own merits,including that with steel plates substituting formwork,construction may proceed with few or no formwork.The tension areas of the structure are wrapped with steel plates to improve the durability,for it not only avoids the exposure of concrete cracks,but also provides protection from impact.The tensile strength of the steel plate at the bottom can be made full use for both the transversal and the longitudinal directions,which greatly simplifies the fabrication of the structure,including make the assembling,welding of reinforcement,and the transversal tension of the prestressing tendon easier.A series of design methods,including calculation methods for flexural capacity,longitudinal and vertical shear resistance,torsion behavior,rigidity,deformation,crack resistance,and creep,as well as the construction details and techniques,will be proposed on the basis of experimental and theoretical studies.A preliminary finite element analysis on the sectional types is carried out.It is shown that the parameters of the section have different impacts on the performance of the structure.Comparing with others,the width of the longitudinal rib of the bottom concrete,the flange thickness and the web height of the concrete are relatively more sensitive factors.In addition,temperature and contraction,creep of the concrete also have much influence on the structural behavior.Shear lag is exhibited to some extent for the longitudinal middle-plane stress distribution along the direction of width of the bottom panel of the steel girder and concrete under the vertical loads.