Abstract:Within presented paper complex kinetic analysis of waste wood solar pyrolysis with fuel characterisation has been presented. Thermogravimetric (TGA) data were obtained for heating rates denoted in solar pyrolysis experiments: 5, 10, 15 and 20 K/min. Study presents alternative approach to lignocellulosic biomass kinetics using NETZSCH Kinetics Neo (v. 2.1.2.2) software. TGA data were enriched with the gas analyser indications and experiments results from solar pyrolysis examined on self-designed laboratory reactor. Presented methodology consisted of <a class="workspace-trigger" href="#e0005">(1)</a> isoconversional analysis: Friedman, Kissinger-Akahira-Sunose and Ozawa-Flynn-Wall analysis yielding apparent activation energies Eα, varying from 185.37 to 375.56 kJ/mol at reaction extent 0.1–0.9, <a class="workspace-trigger" href="#e0010">(2)</a> reaction model identification with generalised master plot method which showed that decomposition was driven by three-dimensional diffusion (D3) with transition to three-dimensional phase boundary (R3) and reaction order based models (F1,F2,Fn) at the end of conversion. Finally, <a class="workspace-trigger" href="#e0015">(3)</a> kinetic model construction was performed based on experiments observations, resulting in modelling of 3 main reactions of pyrolysis products formations. The most intensive condensable release was observed between 250 and 440 °C what correlated with CO2 release described by dominant two-step D3-F2 consecutive reaction with activation energies and logarithmic pre-exponential factors 159.92 kJ/mol, 10.44 log(1/s) and 256.78 kJ/mol, 19.05 log(1/s) for first and second step respectively. CO formation obeyed R3 reaction mechanism with activation energy 181 kJ/mol and pre-exponential factor 12.16 log(1/s). Last stage of pyrolysis, charring, was described by two-step consecutive reaction Fn(n = 3.463)-F2 resulting in formation of CH4 and H2 with activation energies and pre-exponential factors of 249.72 kJ/mol, 15.87 log(1/s) and 162 kJ/mol, 6.61 log(1/s) respectively. Kinetic models and isoconversional methods results were tested using Fisher-Snedecor test. Presented methodology was compared with traditional three pseudo-component wood pyrolysis model and discussed.

Predicting the pyrolysis of wood considering char oxidation under different ambient oxygen concentrations

A pyrolysis model of charring materials considering the effect of ambient oxygen concentration

Autothermal Pyrolysis of Lignocellulosic Biomass: Experimental, Kinetic, and Thermodynamic Studies

Pyrolysis and Ignition of Wood by Thermal Radiation

Modelling the Combustion of Thermally Thick Biomass Particles

Kinetic Study on Pyrolysis and Combustion of Wood under Different Oxygen Concentrations by Using Tg-Ftir Analysis

Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle

Experimental and Kinetic Modeling of Oxygen-Enriched Air Combustion of Municipal Solid Waste.

Thermal-balanced integral model for pyrolysis and ignition of wood

Experimental and numerical simulation of multi-component combustion of typical charring material

Two-Stage Global Biomass Pyrolysis Model for Combustion Applications: Predicting Product Composition with a Focus on Kinetics, Energy, and Mass Balances Consistency

Mathematical model of wood pyrolysis considering effects of moisture

Modeling Pyrolysis of Charring Material in Fire

Optimized TGA-based experimental method for studying intrinsic kinetics of coal char oxidation under moderate or intense low-oxygen dilution oxy-fuel conditions

Experimental and Modeling Investigation of Oxy-Coal Combustion Based on Langmuir-Hinshelwood Kinetics and Direct Calculation of Char Morphology

Development of multi-scale pyrolysis and combustion model for fir wood

Pyrolysis Simulation of Thermally Thick Biomass Particles Based on a Multistep Kinetic Scheme

Insights into wood species and aging effects on pyrolysis characteristics and combustion model by multi kinetics methods and model constructions

Effect of oxygen on thermal behaviors and kinetic characteristics of biomass during slow and flash pyrolysis processes

Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performance

Computational modeling of oxy-coal combustion with intrinsic heterogeneous char reaction models