Abstract:Achieving high strength in the precipitation-strengthened Al-Zn-Mg-Cu alloys produced via additive manufacturing (AM) remains challenging. This work focused on an innovatively developed pulsed laser-arc hybrid process for Al-Zn-Mg-Cu alloy, and further heat treatment for improving the properties was proposed. The as-deposited sample displayed an alternating microstructure featuring coarse columnar grains in the arc zone (AZ) and equiaxed grains in the laser zone (LZ). By simulating the thermal history, it was determined that the formation mechanism of the microstructure was mostly due to the sharp temperature gradient and solidification rate during the pulsed laser duration, as well as the accelerated fluid flow. The stable Zn- and Mg-enriched phases were dispersed within the grains in the LZ, whereas aggregated as the network in the AZ. The two-stage solid solution and aging treatments promoted the generation of numerous disk-like η′ nanoprecipitates and minor needle-like GP-II zone. Moreover, investigations revealed that heat treatment not only contributed to simultaneously increasing the strength and elongation, but also significantly decreasing the anisotropy. This results in a favorable strength (ultimate tensile strength of 602.3 ± 7.6 MPa), which was superior to that of conventional wrought 7075 aluminum alloy. Yield strength modeling analysis demonstrated that the enhanced properties were chiefly attributable to the synergistic effect of Orowan strengthening by the η′ precipitates and dislocation shearing given by the coherent GP-II zone. Our approach of laser-arc hybrid will be applicable to other alloy systems where AM is difficult to perform, and it will have a wide range of applications in the aerospace industry.

High Strength and Good Ductility of Casting Al–Cu Alloy Modified by PrxOy and LaxOy

Age Hardening and Mechanical Properties of Cast AlCu Alloy Modified by La and Pr

Enhanced strength-ductility synergy in a rheo-diecasting semi-solid aluminum alloy

Low-cost and high-strength Mg-Al-Ca-Zn-Mn wrought alloy with balanced ductility

High ductility of Be–Al alloy fabricated by investment casting

Modulation of Multiple Precipitates for High Strength and Ductility in Al-Cu-Mn Alloy

High strength and ductility aluminium alloy processed by high pressure die casting

Study on Microstructure and Mechanical Properties of Al-Mg-Si-Cu Aluminium Alloy with High Ductility

Effects of Adding Trace Modification Elements and Heat Treatment on the Strength and Toughness of AlSi8Cu2MgMn Alloy

Precipitates strengthening mechanism of a new squeeze-cast Al-Cu-Li-Mn alloy with high strength and ductility

Enhancement of Strength-Ductility Synergy of Al-Li Cast Alloy via New Forming Processes and Sc Addition

Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition

Achieving exceptional strength-ductility combination in a novel L1 2 nanoparticles-strengthened high-entropy alloy via conventional casting

A new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility

Achieving exceptional ultrahigh-strength in low-alloy Mg-1Al-1Ca-0.4Mn (wt%) alloy by regulating bimodal microstructure

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi 2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

A new high-pressure die casting Mg−Gd−Sm−Al alloy with high strength-ductility synergy

Superior strength of laser-arc hybrid additive manufactured Al-Zn-Mg-Cu alloy enabled by a tunable microstructure

Microstructure Evolution and Strengthening Mechanisms of Cast Al–Cu–Mn Alloy via Ti–Zr-Synergistic Micro-alloying