Abstract:Excavation of deep hard rock tunnels disturbs the initial stress imbalance, which can lead to rockburst, spalling and/or collapse. The disasters are related not only to the strength of the rock mass, but also to the excavation stress path. By analysing and summarizing a large number of engineering cases, the surrounding rock of a deep tunnel is divided into high-, medium- and low-risk fracture zones of disaster, and the excavation stress paths of the three risk fracture zones are generalized. Based on the true triaxial test system, the catastrophic failure mechanism of rock masses in high- and medium-risk fracture zones of hard rock tunnels in deep engineering under the excavation stress path is studied. It is revealed that the stress difference caused by the excavation stress path fundamentally determines the difference in the surrounding rock fracture degree. A method for evaluating the influence of the excavation stress path on the rock fracture anisotropy by using a three-dimensional stress difference coefficient is proposed. The results show that under the excavation stress path in the high-risk fracture zone, the energy stored in the rock is larger, the rock is more prone to failure, and the rock fracture is more violent. Under the excavation stress path of the medium-risk fracture zone, the rock is more prone to spalling failure. With the increase in the depth from the excavation boundary in the high-risk fracture zone, the stress difference decreases continuously, the rock bearing capacity increases, and the shear fracture component increases. The three-dimensional stress difference coefficient shows a linear positive correlation with the rock fracture anisotropy. The mechanism of the excavation stress path affecting rock burst disasters in deep hard rock tunnels is discussed from the perspective of energy storage and dissipation. This study also provides guidance for selecting a reasonable support scheme.

Analysis Methods of Stress Adjustment Based on Stress Path and Plastic Assessment

Influence Analysis of In-situ Stress on Plastic Zone of Circular Chamber Surrounding Rock

Mechanical Analysis of Small Interval Tunnel Based on Three-dimensional FEM Model

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Study on the Stress and Deformation of Surrounding Rock and Support Structure of Super Large Section Tunnels Based on Different Excavation Methods

Analytical Solution and Factors Influencing the Tunnel Plastic Zone under a Nonuniform Stress Field

Influence of principal stress orientation on stress distribution and plastic zone evolution of rock surrounding tunnels

Theoretical Study of Surrounding Rock Loose Zone Scope Based on Stress Transfer and Work–Energy Relationship Theory

Research on Stress Path During Excavation Considering Rotation of Principal Stress Axis

Influence Of Stress Path On Secant Modulus Of Soft Saturated Clay

Three-dimensional stress variation characteristics in deep hard rock of CJPL-II project based on in-situ monitoring

Analysis on Reinforcement of Middle Rock Pillar of Parallel Tunnel in the Weak Rock

Stress Analysis and Spalling Failure Simulation on Surrounding Rock of Deep Arch Tunnel

Study on Stress Characteristics of Multi-arch Tunnel Lining under Weak Surrounding Rock Conditions Based on Field Measurement

Influence of tunnel excavation on the magnitude and rotation angle of principal stress in surrounding rock

Stress Distribution and Stress-induced Failures in Surrounding Rock Mass of Deep Tunnels

STUDY ON EFFECT OF IN-SITU STRESSES ON PLASTIC REGION INDUCED BY EXCAVATIONS OF UNDERGROUND OPENINGS

A semi-analytical method for stress-strain analysis of tunnels under dip-slip faulting based on an elastic-plastic foundation beam model

Numerical solutions for strain-softening surrounding rock under three-dimensional principal stress condition

Excavation Stress Path Induced Fracturing Mechanism of Hard Rock in Deep Tunnel

Elastic–plastic response of a deep tunnel excavated in 3D Hoek–Brown rock mass considering different approaches for obtaining the out-of-plane stress