Abstract:In this work, a nanoporous array anodic titanium was selected as a fiber substrate because of its high surface-to-volume ratio, easy preparation, mechanical stability, and rich titanol groups on its surface that can anchor other active groups. Then, a polymerizable ionic liquid monomer pair, (1-vinyl-3-hexadecylimidzolium)-(p-styrenesulfonate) ([C(16)VIm]+SS-), was synthesized and used for the chemical modification of the mercaptopropyl-functionalized nanoporous anodic titania support using a surface radical chain-transfer addition. A homogeneous and porous coating with a thickness of about 7 mu m was achieved. The main advantage of this copolymerization method over the conventional single-ion polymerization is its high stability under harsh conditions, like high temperatures, as well as acidic, alkaline and high ionic strength solutions. Combined with gas chromatography-a flame ionization detection (GC-FID), the poly[C(16)VIm]+SS- was used as a sorbent material for the direct immersion SPME of four types of compounds, including polycyclic aromatic hydrocarbons, hydrophobic phenols, nonvolatile phthalate esters and parabens, in an aqueous solution. The analytical performance of the proposed method was investigated under the optimum extraction conditions (content of NaCl, 20% (w/v); extraction temperature, 70 degrees C; and extraction time, 55 min). Calibration ranges were 0.1-400 mu g L-1 for four hydrophobic phenols, anthracene (Ant) and fluoranthene (Flt), 0.15-600 mu g L-1 for dibutyl phthalate (DBP) and di-(2-ethyl-hexyl) phthalate (DEHP), and 0.5-2000 mu g L-1 for ethylparaben (EPN) and propylparaben (PPN). The as-established method showed good linearity with good correlation coefficients (R = 0.993-0.999) and low detection limits in the range of 0.003 to 0.156 ng mL(-1) (S/N = 3). In addition, the poly[C(16)VIm]+SS- -SPME fiber showed good precision (3.2-13.5%) and repeatability between fiber and fiber (9.1-19.6%). Finally, soil extract sample were analyzed and satisfactory results were obtained.

Preparation of A Poly(N-Isopropylacrylamide-Co-Ethylene Dimethacrylate) Monolithic Capillary and Its Application for In-Tube Solid-Phase Microextraction Coupled to High-Performance Liquid Chromatography

Preparation and evaluation of hydroxylated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography.

Poly(acrylamide-vinylpyridine-N,N′-methylene Bisacrylamide) Monolithic Capillary for In-Tube Solid-Phase Microextraction Coupled to High Performance Liquid Chromatography

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid phase microextraction coupled to high performance liquid chromatography and analysis of amphetamines in urine samples.

Poly (methacrylic Acid–ethylene Glycol Dimethacrylate) Monolithic Capillary for In-Tube Solid Phase Microextraction Coupled to High Performance Liquid Chromatography and Its Application to Determination of Basic Drugs in Human Serum

A practical interface designed for on-line polymer monolith microextraction: synthesis and application of poly(4-vinylpyridine-co-ethylene glycol dimethacrylate) monolith.

Single-step Preparation and Characterization of Polymeric Monolith for Pressurized Capillary Electrochromatography of Typical Homologs.

Preparation and evaluation of a hydrophilic poly(2-hydroxyethyl methacrylate-co-N,N'-methylene bisacrylamide) monolithic column for pressurized capillary electrochromatography.

Preparation of Poly(trimethyl-2-methacroyloxyethylammonium Chloride-Co-ethylene Glycol Dimethacrylate) Monolith and Its Application in Solid Phase Microextraction of Brominated Flame Retardants.

Preparation of Nanoporous Array Anodic Titanium Wire Supported Solid-Phase Microextraction Fiber Coated with A Copolymerized Polymerizable Ionic Liquid Monomer Pair

Temperature-response polymer coating for in-tube solid-phase microextraction coupled to high-performance liquid chromatography.

Preparation and characterization of methacrylate-based monolith for capillary hydrophilic interaction chromatography.

Preparation Of New Hydrophilic Monolithic Columns And Their Applications In Capillary Liquid Chromatography And Pressurized Capillary Electrochromatography

Preparation of Porous Polymer Monolithic Column Incorporated with Graphene Nanosheets for Solid Phase Microextraction and Enrichment of Glucocorticoids.

Monolithic column with double mixed-modes of hydrophilic interaction/cation-exchange and reverse-phase/cation-exchange stationary phase for pressurized capillary electrochromatography.

Preparation Of A Novel Zwitterionic Hybrid Monolith Column With Incorporated Fumed Silica Nanoparticle And Its Application In Pressurized Capillary Electrochromatography

Methacrylate-based monolithic column with mixed-mode hydrophilic interaction/strong cation-exchange stationary phase for capillary liquid chromatography and pressure-assisted CEC.

Preparation Characterization and Evaluation of Octyl-type Monolithic Column for Capillary Liquid Chromatography

Rapid "One-Pot" Preparation of Polymeric Monolith Via Photo-Initiated Thiol-Acrylate Polymerization for Capillary Liquid Chromatography.

Rapid Analysis of Biological Samples Using Monolithic Polymer-Based In-Tube Solid-Phase Microextraction with Direct Mass Spectrometry

Preparation of the Capillary-based Microchips for Solid Phase Extraction by Using the Monolithic Frits Prepared by UV-initiated Polymerization