Abstract:The main disadvantages of thermoplastic starch ( TPS) are their retrogradation and unsatisfactory mechanical properties particularly under wet or dry environments. Formamide was used as an individual plasticizer to prepare thermoplastic starch ( TPS) to overcome the facile retrogradation of polyols-plasticized TPS with good mechanical properties or the poor mechanical properties of urea-plasticized TPS with good retrogradation resistance. By using scanning electron microscope (SEM) the native cornstarch granules were proved to transfer to a continuous phase with out crystallinity after plasticization with formamide. By rheology tests, it was shown that formamide made TPS less temperature sensitive than glycerol did in the processing temperature range of formamide-plasticized TPS (FPTPS) from 110degreesC to 150degreesC. Thermal analysis reveals that glycerol-plasticized TPS (GPTPS) exhibits better thermal stability and FPTPS has a slightly lower glass transition temperature. The effect of water contents on the mechanical properties of FPTPS and GPTPS was also studied, and FPTPS showed good ductility at water contents of 13% similar to 35%. The maximal failure stress and strain were 3.9 MPa and 95%, respectively. At three typical environment conditions of RH = 0,50 % and 100 % the influence of formamide and glycerol on the retrogradation of TPS was studied using X-ray diffractometry. It was found that compared to glycerol, formamide could effectively restrain the retrogradation at various humidities. The property improvement of TPS by using formamide was ascribed to the formation of more stable hydrogen bonds between plasticizer molecules and the hydroxy groups of the starch.

Aliphatic Amidediol and Glycerol as a Mixed Plasticizer for the Preparation of Thermoplastic Starch

Synthesis of Aliphatic Amidediol and Used As a Novel Mixed Plasticizer for Thermoplastic Starch

Preparation of A Novel Thermoplastic Starch (tps) Material Using Ethylenebisformamide As the Plasticizer

N-(2-Hydroxypropyl)formamide and N-(2-hydroxyethyl)-N-methylformamide as two new plasticizers for thermoplastic starch

An Investigation of the Physical Properties of Extruded Glycerol- and Formamide-Plasticized Cornstarch

Effect of different proportions of glycerol and D-mannitol as plasticizer on the properties of extruded corn starch

Study on the Properties of Ethylenebisformamide and Sorbitol Plasticized Corn Starch (Esptps)

N-(2-Hydroxyethyl)Formamide As A New Plasticizer for Thermoplastic Starch

Preparation of a New Dialdehyde Starch Derivative and Investigation of Its Thermoplastic Properties

Thermoplastic Starch Prepared with Different Plasticizers: Relation Between Degree of Plasticization and Properties

The plastcizers containing amide groups for thermoplastic starch

Thermoplastic Starch Processed under Various Manufacturing Conditions: Thermal and Electrical Properties

STUDIES ON THE PROPERTIES OF FORMAMIDE PLASTICIZED-THERMOPLASTIC STARCH

Formamide As the Plasticizer for Thermoplastic Starch

Modified Corn Starches with Improved Comprehensive Properties for Preparing Thermoplastics

Preparation and Characterization of A Novel Thermoplastic Starch Using Dimethyl Sulfoxide As the Plasticizer

Ethanolamine As a Novel Plasticiser for Thermoplastic Starch

Plasticizing and anti-plasticizing effects of polyvinyl alcohol in blend with thermoplastic starch

Effect of Hyperbranched Poly(trimellitic Glyceride) with Different Molecular Weight on Starch Plasticization and Compatibility with Polyester.

Effect of Dialdehyde Starch on Cassava Starch/poly(vinyl Alcohol) Blends Fabricated by Melt Mixing Method with Glycerol Plasticized

Preparation and properties of thermoplastic pea starch using<i>N</i>,<i>N</i>-bis(2-hydroxyethyl)formamide as the plasticizer