Abstract:Synthetic aperture radar (SAR) is an effective tool in detecting building damage. At present, more and more studies detect building damage using a single post-event fully polarimetric SAR (PolSAR) image, because it permits faster and more convenient damage detection work. However, the existence of non-buildings and obliquely-oriented buildings in disaster areas presents a challenge for obtaining accurate detection results using only post-event PolSAR data. To solve these problems, a new method is proposed in this work to detect completely collapsed buildings using a single post-event full polarization SAR image. The proposed method makes two improvements to building damage detection. First, it provides a more effective solution for non-building area removal in post-event PolSAR images. By selecting and combining three competitive polarization features, the proposed solution can remove most non-building areas effectively, including mountain vegetation and farmland areas, which are easily confused with collapsed buildings. Second, it significantly improves the classification performance of collapsed and standing buildings. A new polarization feature was created specifically for the classification of obliquely-oriented and collapsed buildings via development of the optimization of polarimetric contrast enhancement (OPCE) matching algorithm. Using this developed feature combined with texture features, the proposed method effectively distinguished collapsed and obliquely-oriented buildings, while simultaneously also identifying the affected collapsed buildings in error-prone areas. Experiments were implemented on three PolSAR datasets obtained in fully polarimetric mode: Radarsat-2 PolSAR data from the 2010 Yushu earthquake in China (resolution: 12 m, scale of the study area: 50 km2); ALOS PALSAR PolSAR data from the 2011 Tohoku tsunami in Japan (resolution: 23.14 m, scale of the study area: 113 km2); and ALOS-2 PolSAR data from the 2016 Kumamoto earthquake in Japan (resolution: 5.1 m, scale of the study area: 5 km2). Through the experiments, the proposed method was proven to obtain more than 90% accuracy for built-up area extraction in post-event PolSAR data. The achieved detection accuracies of building damage were 82.3%, 97.4%, and 78.5% in Yushu, Ishinomaki, and Mashiki town study sites, respectively.

Feasibility Study of Building Seismic Damage Assessment Using Oblique Photogrammetric Technology

Building Information Extraction and Earthquake Damage Prediction in an Old Urban Area Based on UAV Oblique Photogrammetry

Rapid Seismic Risk Assessment of Bridges Using UAV Aerial Photogrammetry

Integrated Detection and Analysis of Earthquake Disaster Information Using Airborne Data

Assessment of the degree of building damage caused by the 2010 Yushu, China earthquake using satellite and airborne data

Post-earthquake assessment of building damage degree using LiDAR data and imagery

Identification of Building Damage from UAV-Based Photogrammetric Point Clouds Using Supervoxel Segmentation and Latent Dirichlet Allocation Model

Building-Based Damage Detection from Postquake Image Using Multiple-Feature Analysis

Automatic Detection of Earthquake-Damaged Buildings by Integrating UAV Oblique Photography and Infrared Thermal Imaging

Feasibility Study of Earthquake‐Induced Damage Assessment for Structures by Utilizing Images from Surveillance Cameras

Three-Dimensional Point Cloud Analysis for Building Seismic Damage Information

Photo-realistic Visualization of Seismic Dynamic Responses of Urban Building Clusters Based on Oblique Aerial Photography

Extraction of Urban Building Damage Using Spectral, Height and Corner Information from VHR Satellite Images and Airborne LiDAR Data

Research on UAV Oblique Photography Route Planning in the Investigation of Building Damage after the Earthquake

Surface damage quantification of postearthquake building based on terrestrial laser scan data

Multi-Angle Sar Images for Earthquake Damage Assessment

Visualization of regional seismic response based on oblique photography and point cloud data

Automatic identification of building structure types using unmanned aerial vehicle oblique images and deep learning considering facade prior knowledge

Building damage detection from post-quake remote sensing image based on fuzzy reasoning

Detecting Damaged Buildings Caused by Earthquake Using Local Gradient Orientation Entropy Statistics Method.

Building Damage Detection Based on OPCE Matching Algorithm Using a Single Post-Event PolSAR Data