Abstract:Ultra-high performance concrete (UHPC) is a novel cement-based material with exceptional mechanical and durability properties. Silica fume, the primary supplementary cementitious material (SCM) in UHPC, is expensive in North America, so it is often substituted with inexpensive class F fly ash. However, future availability of fly ash is uncertain as the energy industry moves toward renewable energy, which creates an urgent need to find cost-effective and environmentally friendly alternatives to fly ash. This study investigated replacing cement, fly ash, and silica fume in UHPC mixtures with ground granulated blast-furnace slag (GGBFS), metakaolin, and a natural pozzolan (pumicite). To identify acceptable UHPC mixtures (28-day compressive strength greater than 120 MPa), workability, compression, and flexural tests were conducted on all mixtures. Then, durability properties including shrinkage, frost resistance, and chloride ion permeability (rapid chloride permeability and surface resistivity tests) were evaluated for the acceptable UHPC mixtures. Results showed that 75, 100, and 40% of fly ash in the control mixture could be replaced with pumicite, metakaolin, and GGBFS, respectively, while still producing acceptable strengths. Flexural strengths were greater than 14.20 MPa for all mixtures. For durability, UHPC mixtures had shrinkage strains no greater than 406 μstrain, durability factors of at least 105, and "very low" susceptibility to chloride ion penetration, indicating that these SCMs are suitable candidates to completely replace fly ash and partially replace silica fume in non-proprietary UHPC.

Investigation on Compounding and Application of C80–C100 High-Performance Concrete

Study on Mechanical Properties and Durability of Self-compacting High Performance Concrete

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Very-high-performance concrete with ultrafine powders

Properties of HPC with Pulverized Fly Ash Composite

Optimization Of The Fabrication Technology Of Selfcompacting High Performance Concrete

Study on the Strength and Microcosmic Characteristics of C50 High-Performance Concrete (HPC) Containing Manufactured Sands

Mechanical Properties and Durability of High-Performance Concretes Blended with Circulating Fluidized Bed Combustion Ash and Slag as Replacement for Ordinary Portland Cement

Research on Preparation Technique of C100 Ultra-High Performance Self-Compaction Concrete

Optimum Mix Parameters of High-Strength Self-Compacting Concrete with Ultrapulverized Fly Ash

Study On Compressive Properties And Chloride Permeability O Ultra-High-Performance Concrete

A Comprehensive Study on Non-Proprietary Ultra-High-Performance Concrete Containing Supplementary Cementitious Materials

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Design of Eco-friendly Ultra-high Performance Concrete with Supplementary Cementitious Materials and Coarse Aggregate

Performance Research on Ultra-High Performance Self-Compaction Concrete (Uhp-Scc)

Development and Application of High Performance Concrete and Ultra-high Performance Concrete

Static, dynamic mechanical properties and microstructure characteristics of ultra-high performance cementitious composites

Mix Design and Engineering Application of C80 High-Performance Silicon Fume Concrete

Technical Features and Countermeasures of High Strength and High Performance Concrete

Experiments on the Self-compacting Steel Fiber Reinforced UHPC

The influence of superplasticizer and superfine mineral powder on the flexibility, strength and durability of HPC