Abstract:A prediction model of the welding process of Ti-6Al-4V titanium alloy was established by using the finite element method, which was used to evaluate the phase composition, residual stress and deformation of the welded joints of Ti-6Al-4V sheets with different processes (including tungsten inert gas welding, TIG, and laser beam welding, LBW). The Ti-6Al-4V structures of TIG welding and LBW are widely used in marine engineering. In order to quantitatively study the effects of different welding processes (including TIG welding and LBW) on the microstructure evolution, macro residual stress and deformation of Ti6Al4V titanium alloy sheets during welding, a unified prediction model considering solid-state phase transformation was established based on the ABAQUS subroutine. In this paper, LBW and TIG welding experiments of 1.6 mm thick Ti-6Al-4V titanium alloy sheets were designed. The microstructure distribution of the welded joints observed in the experiment was consistent with the phase composition predicted by the model, and the hardness measurement experiment could also verify the phase composition and proportion. From the residual stress measured by experiment and the residual stress and deformation calculated by finite element simulation of LBW and TIG weldments, it is concluded that the effect of phase transformation on residual stress is mainly in the weld area, which has an effect on the distribution of tensile and compressive stress in the weld area. The overall deformation of the welded joint is mainly related to the welding process, and the phase transformation only affects the local volume change of the weld seam. Importantly, the phase composition and residual stress, which are scalar fields, calculated by the established model can be introduced into the numerical analysis of structural fracture failure as input influence factors.

SOLID-STATE PHASE TRANSFORMATION OF WELDED METAL IN CONTROL OF WELDING DISTORTION PROCESS

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Welding Distortion Control of Thin Al Alloy Plate by Static Thermal Tensioning

Control of Buckling Distortion of TC4 Thin Plate by Impact Revolution Pressing During Welding Process

Constitutive Model Coupled with Mechanical Effect of Volume Change and Transformation Induced Plasticity During Solid Phase Transformation for TA15 Alloy Welding

Effects of Low-Temperature Transformation and Transformation-Induced Plasticity on Weld Residual Stresses: Numerical Study and Neutron Diffraction Measurement

The Effect of Martensitic Phase Transformation Dilation on Microstructure, Strain–Stress and Mechanical Properties for Welding of High-Strength Steel

Solid phase transformation effects on stress and strain in the thick plate EH40 welded butt joint

Finite element analysis of controlling the TC4 thin plate weldment wave-like deformation by welding with impacting rotation

Welding TC4 Thin Plates by Revolution Pressing in Welding Process

PHASE TRANSFORMATION TEMPERATURE CONTROL OF WELD METAL OF LASER WELDED TiNi SHAPE MEMORY ALLOY JOINT

New Method to Control Residual Stresses and Distortion by Welding with Trailing Rotating Extrusion

Controlling of Welding Residual Stress and Deflection Distortion for Flat Plate by Longitudinal Pre-stress Method

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

Controlling of stress and distortion in thin copper plate by welding with trailing peening

Influence of Multi-Beam Preheating Temperature and Stress on the Buckling Distortion in Electron Beam Welding

Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG Welding.

Dynamic Process of Angular Distortion Between Aluminum and Titanium Alloys with TIG Welding

Effects of welding condition on weld shape and distortion in electron beam welded Ti2AlNb alloy joints

Finite element and experiment analysis of welding residual stress in S355J2 steel considering the bainite transformation

Effects of Weld Metal Strength and Transformation Temperature on Welding Residual Stress