Abstract:Recently, with the trend of redundancy design, the importance of synchronous motion control of multiple motors has been emphasized in various fields such as automotive, construction, and industrial engineering. Therefore, this paper proposed a novel passive decomposition-based robust synchronous control strategy for a multi-motor system, guaranteeing that both the tracking error of each motor and the synchronous error between motors are ultimately and synchronously bounded, even under the presence of parametric uncertainty and unstructured external disturbance. Specifically, a passive decomposition is used to obtain the locked and shape systems from the original system, and then a sliding mode control system along with robust compensations is designed for each decomposed system to achieve the precise synchronous motion control of the n number of motors. Here, the controller for the locked system reduces the tracking errors of motors for a given desired trajectory, while the controller for the shaped system decreases the synchronous errors between motors. Furthermore, the control system is generally and conveniently formulated to adopt the arbitrary n number of motors that must track a given desired trajectory and be synchronized. Compared to other related studies, this work especially focused on increasing the robustness of the entire system using both high-order sliding mode control and two separate compensation terms for model uncertainty and unstructured external disturbance. Finally, to validate the effectiveness of the proposed synchronous control strategy, the extensive experimental studies on two/three/four-geared BLDC motors with a high dead-zone effect were conducted, and we also compared the synchronous control performance of the proposed control strategy with the other representative control approaches, a master-slave control scheme and an independent one to address the superiority of the proposed control system. Regardless of the number of motors, due to the robustness of the control system, it is found that the proposed control ensures the tracking and synchronous errors are less than 1 degree for the sine-wave trajectory while it guarantees that the errors are below 1.5 degree for the trapezoidal trajectory. This control approach can be widely and generally applied to the multiple motor control required in various engineering fields.

CAN-based Synchronized Motion Control for Induction Motors

Fuzzy Sliding Mode Control for Synchronization of Multiple Induction Motors Drive

Synchronized Sliding-Mode Control for Multi-Induction Motors Based on Adjacent Cross-Coupling

Speed Synchronisation of Multiple Induction Motors with Adjacent Cross-Coupling Control

Motion Synchronization of Dual-Cylinder Pneumatic Servo Systems with Integration of Adaptive Robust Control and Cross-Coupling Approach.

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Research of Multi-Axis-movement-system Based on CAN

Advanced Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics.

Open Architecture Multi-Axis Motion Control System for Industrial Robot Based on Can Bus

Research On Multi-Motor Synchronous System Based On Can

Integrated Feedback Scheduling and Control Codesign for Motion Coordination of Networked Induction Motor Systems

Integrated Coordinated/Synchronized Contouring Control of a Dual-Linear-Motor-Driven Gantry

Scheduling and Control Co-Design of Networked Induction Motor Control Systems

A REAL-TIME DATA-DRIVEN CONTROL SYSTEM FOR MULTI-MOTOR-DRIVEN MECHANISMS

Integrated Control of Linear Motors for Coordination and Synchronization

Multi-motor position synchronization control method based on non-singular fast terminal sliding mode control

Synchronization Control Strategy of Multi-Motor System Based on Profibus Network

Regional Coupling Based Synchronization Control of Multi-Motor Driving TBM Cutterhead System

Synchronous control of dual linear motors based on advanced space voltage vector switch table

Advanced Synchronous Control of Dual Parallel Motion Systems

A Passive Decomposition Based Robust Synchronous Motion Control of Multi-Motors and Experimental Verification