Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Analysis on hysteresis in nucleate pool boiling heat transfer

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Mesoscale Simulations of Boiling Curves and Boiling Hysteresis under Constant Wall Temperature and Constant Heat Flux Conditions

Numerical study on temperature response of microheater and evolution characteristics of superheated zone under fast transient heating

Recent Analytical and Numerical Studies on Phase-Change Heat Transfer

A transient model for heterogeneous nucleation under pulse heating in pool boiling

Bifurcation and Hysteresis Phenomena in the Two－phase Natural Circulation System

Numerical Simulation of Complete Pool Boiling Curves: from Nucleation to Critical Heat Flux Through Transition Boiling to Film Boiling

Thermocapillary Effect on Bubble Sweeping and Circling During Subcooled Nucleate Pool Boiling of Water over Microwire

Dry Spot Dynamics and Wet Area Fractions in Pool Boiling on Micro-Pillar and Micro-Cavity Hydrophilic Heaters: A 3D Lattice Boltzmann Phase-Change Study

A thermodynamic analysis for heterogeneous boiling nucleation on a superheated wall

Study on the effect of multiple bubbles hydrodynamics on pool boiling heat transfer

Thermodynamic Bifurcations of Boiling in Solid-State Nanopores

Transient Numerical Investigation of a Thermal-Driving Water Pipe Cooling System

NUCLEATION AND THERMODYNAMIC NONEQUILIBRIUM FOR BOILING IN MICROCHANNELS AND MICROSTRUCTURES

Numerical simulation of pool boiling heat transfer on smooth surfaces with mixed wettability by lattice Boltzmann method

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Heat Transfer Characteristics And Flow Pattern Visualization For Flow Boiling In A Vertical Narrow Microchannel

Two-dimensional Mesoscale Simulations of Saturated Pool Boiling from Rough Surfaces. Part II: Bubble Interactions above Multi-Cavities

Visual Investigation on Startup Characteristics of a Novel Loop Heat Pipe