Abstract:Zirconium (Zr) emerges as the most effective grain refiner for magnesium (Mg) alloys incorporating Zr. Typically, Zr is introduced in the form of an Mg–Zr master alloy. However, within Mg–Zr master alloys, Zr predominantly exists in a particle form, which tends to aggregate due to attractive van der Waals forces. The clustered Zr is prone to settling, thereby reducing its refining impact on Mg alloys. In this work, a combined pretreatment process for Mg–Zr master alloys was proposed, encompassing the introduction of a physical field to intervene the agglomeration of particle Zr and the employ of high-temperature dissolution and peritectic reactions to promote the solid solution of Zr. The results demonstrate that the particle Zr within the pretreated Mg–Zr master alloy is effectively dispersed and refined, and greater solute Zr levels can be achieved. The subsequent grain refinement ability was studied on a typical Mg–6Zn–0.6Zr (wt%) alloy. The outcome highlights that an improvement in the grain refinement efficacy (32.4%) of Mg–Zr master alloys was obtained with a holding time of 60 min. The pretreated Mg–Zr master alloy significantly augments the efficiency of grain refinement for Mg alloys through a synergistic strategy involving heterogeneous nucleation and solute-driven growth restriction. The crucial factor in achieving effective grain refinement of Zr in Mg alloys lies in regulating the presence and morphology of Zr in the Mg–Zr master alloy, distinguishing between particle Zr and solute Zr. This study introduces a novel method for developing more efficient Mg–Zr refiners.

Grain Refinement Behavior of Potassium Fluozirconate (k2zrf6) Salts Mixture Introduced into Mg–10Gd–3Y Magnesium Alloy

Study on the grain refinement behavior of Mg-Zr master alloy and Zr containing compounds in Mg-10Gd-3Y magnesium alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Enhanced Grain Refining Effect of Mg–Zr Master Alloy on Magnesium Alloys via a Synergistic Strategy Involving Heterogeneous Nucleation and Solute-Driven Growth Restriction

Effect of Y and Gd solutes on grain refinement of the as-extruded Mg-Gd(-Y)-Zn-Mn alloys

Effect of Zr on the microstructure, mechanical properties and corrosion resistance of Mg–10Gd–3Y magnesium alloy

Grain Refining Mechanism in Mg–9Gd–4Y Alloys by Zirconium

Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg-9.80Gd-3.78Y-1.12Sm-0.48Zr alloy

Effect of Zn Addition on Microstructure and Mechanical Properties after Extrusion, Rolling and Ageing in Mg-9Gd-3Y-0.5Zr Alloys

Gd contents, mechanical and corrosion properties of Mg–10Gd–3Y–0.5Zr alloy purified by fluxes containing GdCl3 additions

Effect of Zn/(Gd+Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy

Current Research Status of Grain Refinement Effect of Zr on Magnesium Alloy

Grain refinement of magnesium alloys by Mg-Zr master alloys: The role of alloy chemistry and Zr particle number density

Achieving Low-Temperature Zr Alloying for Microstructural Refinement of Sand-Cast Mg-Gd-Y Alloy by Employing Zirconium Tetrachloride

Microstructure and Strengthening Mechanism of High Strength Mg–10Gd–2Y–0.5Zr Alloy

Effect of Trace Zinc on the Microstructure and Mechanical Properties of Extruded Mg-Gd-Y-Zr Alloy

Heat treatment, microstructure and mechanical properties of a Mg-Gd-Y alloy grain-refined by Al additions

Effects of Gd and Zr Additions on the Microstructures and High-Temperature Mechanical Behavior of Mg–Gd–Y–Zr Magnesium Alloys in the Product Form of a Large Structural Casting

Microstructure and Mechanical Properties of Extruded Mg–Gd–Y–Zn Alloy with Mn or Zr Addition

Effect of zirconium addition on microstructure and mechanical properties of Mg97Y2Zn1 alloy

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States