Abstract:Superhydrophobic surfaces (SHSs) are considered to be a promising technology for achieving skin-friction drag reduction. Development of more efficient techniques for simulating the turbulent boundary layer on SHSs continues to be a subject of interest. In this study, numerical simulations were carried out to capture near-wall behaviours due to the effect of the SHS on wall-bounded flows. To achieve this, high- to intermediate-fidelity turbulence models including Reynolds-averaged Navier–Stokes, detached eddy simulation and large eddy simulation were utilized. With regard to slip conditions, the well-known Navier slip velocity method was used over the SHS. For validating the numerical solutions, the slip velocity and skin friction over the SHS were compared with the experimental output. Results showed that the velocity profile and Reynolds stresses on the SHS were comparable to the reported results. Then, the developed models were further extended to investigate the drag reduction effect of SHSs with rectangular grooves. The subsequent results showed that the combination of superhydrophobicity and rectangular grooves led to a better performance with a maximum drag reduction of 46.1%. This is due to the surface slip caused by the SHS and the secondary vortex effect created by the grooves. Our results revealed that Reynolds stresses of the slippery grooved surface were higher than those of the case in which a shear-free condition was employed for the grooved surface. More importantly, the numerical results indicate the previous assumption of the shear-free condition is inaccurate for the geometrically simplified grooved SHSs. Therefore, geometry modifications rather than an overly simplified shear-free boundary condition should be applied in computational fluid dynamics simulations for SHSs with grooves or other complex structures.

Experimental Research on the Effect of Viscosity on Drag Reduction of Superhydrophobic Solid Surface

Friction of Droplets Sliding on Microstructured Superhydrophobic Surfaces.

Anisotropic wetting properties on a precision-ground micro-V-grooved Si surface related to their micro-characterized variables

Study on the shear stress and interfacial friction of droplets moving on a superhydrophobic surface

Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure

Interfacial mechanism of hydrogel with controllable thickness for stable drag reduction

Analysis of Water Droplet Motion on Hydrophobic Surfaces with Different Microstructures

Evaporation characteristics of viscous droplets on stainless steel superhydrophobic surface

DRAG REDUCTION IN TURBULENT FLOWS OVER SUPERHYDROPHOBIC SURFACES WITH MICRO-NANO TEXTURES

On the Measurement of Slip Length for Liquid Flow over Super-Hydrophobic Surface

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

Experimental study on mechanism of stable drag reduction with hydrogel interface

Experimental Study on the Drag Reduction Effect of a Rotating Superhydrophobic Surface in Micro Gap Flow Field

Fluid Drag Reduction on Superhydrophobic Surfaces Coated with Carbon Nanotube Forests (Cnts)

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

Mechanisms of Drag Reduction of Superhydrophobic Surfaces in a Turbulent Boundary Layer Flow

Investigation of retention of gases in transverse hydrophobic microgrooved surfaces for drag reduction

On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface

Numerical investigation of the drag reduction effect in turbulent channel flow by superhydrophobic grooved surfaces

Stable and drag-reducing superhydrophobic silica glass microchannel prepared by femtosecond laser processing: design, fabrication, and properties

Research progress of slippage characteristic and gas film stability enhancement methods on biomimetic hydrophobic surfaces