Abstract:A newly developed turbocharging system, called a mixed pulse converter (MIXPC), is proposed and the performance of the proposed system applied to diesel engines is evaluated. The aim of this proposed system is to reduce the scavenging interference between cylinders, and to lower the pumping loss in cylinders and the brake specific fuel consumption (BSFC). In addition, exhaust manifolds of simplified design can be constructed with small dimensions, low weight, and a single turbine entry. An engine performance simulation code, in which a second-order finite volume method + total variation diminishing method is used to simulate the one-dimensional unsteady gas dynamic phenomenon in intake and exhaust pipe systems, has been developed. By simulating a locomotive diesel engine using the module pulse converter (MPC) turbocharging system and the MIXPC, it is found that not only is the average scavenging coefficient of the MIXPC larger than that of the MPC, but also cylinders of the MIXPC have more homogeneous scavenging coefficients than those of the MPC, and the pumping loss and BSFC of the MIXPC are lower than those of the MPC. To validate the prediction results, experiments on a locomotive diesel engine equipped with a MIXPC have been successfully completed. Experimental results show that the MIXPC turbocharging system reduces the exhaust gas temperature before turbine by 80°C and BSFC at part load by 4.3 g/kW h, and the exhaust gas temperatures at each cylinder outlet at high load are more uniform. The diesel engine equipped with the MIXPC has the potential to increase its power to 115 per cent load.

A New Saving-energy Implementation of Converter Burn-in Based on Energy Recycling

Design and analysis of an energy recycling electronic load system

Construction and Control of an Energy Recycling Electronic Load System

Energy recycling load system with a high gain DC-DC converter for ultra low voltage power supplies

Design of Standby Control for Class-E Resonant Converter

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

Burn-in test system of motor controller based on PWM rectifier

A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

A Charge Recycling Method for Step-Down SC Converter in Energy Harvesting Systems

A Generic Power Loss Calculation Method for Fast Converter Performance Scanning

A Novel Bi-Directional DC-DC Converter for HEV Application

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

AI-aided power electronic converters automatic online real-time efficiency optimization method

High Efficiency High Integration Green Converter

Saving Energy and Energy-Feedback Experimental System for Electrical Vehicle Motor

A Novel Bi-Directional DC-DC Converter for Distributed Energy Storage Device

Development and performance evaluation of a comprehensive automotive energy recovery system with a refined energy management strategy

Simulation Research on Energy Recycling Electronic Load for Power Supply Testing

Efficiency-Based Optimization of Steady-State Operating Points for Parallel Source Converters in Stand-Alone Power System

The Energy-Saving Retrofit of Axial Fan Based on Performances Test in a 300MW Unit