Abstract:Cationization of cotton is considered to be an effective way to realize salt-free dyeing of reactive dyes. However, applying cotton modified with glycidyltrimethylammonium chloride (GTA) suffers from large consumption of the cationic reagent. One of the reasons is that high crystallinity of cotton fibers hinders the penetration of the reagents into the cellulose interior and limits the reaction between them. This paper designed to use alcohol-water-NaOH system to pretreat the fibers before cationization. With this method, crystallinity of the cotton fibers is decreased and more reactive –OH is exposed, resulting in much higher fiber-reagent reactivity and increased GTA utilization. Influence of alcohol type, alcohol-to-water ratio, and quantity of NaOH on fiber crystallinity and GTA dosage for cationization are all examined. It is found that for achieving 96.0% fixation of C.I. Reactive Black 5 in the absence of salt, GTA dosage can be reduced by half when the fibers are pretreated by alcohol-water-NaOH. Compared with ethanol, n-propanol and isopropanol, tert-butyl alcohol incorporated system shows better performance in increasing fiber reactivity due to their weaker ability to dissolve ions. In this study, XRD and FT-IR are used to demonstrate changes in crystallinity of the fibers after pretreatment. The alteration in micromorphology and hydrophilicity of the pretreated fibers is observed by SEM and water contact angle test, respectively. Furthermore, the alcohol-water-NaOH system can be recycled to show very good repeatability. Notably, all dyed samples pretreated with the system present high color saturation and satisfactory color fastness, especially that the wet rub fastness reaches 4–5 grade, which is one grade higher than that obtained from the conventional dyeing with salt. The above findings prove that alcohol-water-NaOH pretreatment is effective in enhancing reactivity of the cotton fibers and penetrability of the agent, and it shows promising prospects in real application.

Continuous Dyeing of Cationised Cotton with Reactive Dyes

A Non-Aqueous Dyeing Process of Reactive Dye on Cotton

Dyeing of cationised cotton using nanoscale pigment dispersions

Eco-friendly cationic modification of cotton fabrics for improving utilization of reactive dyes

Cationic cotton modified by 3-chloro-2-hydroxypropyl trimethyl ammonium chloride for salt-free dyeing with high levelling performance

Efficient Cationization of Cotton for Salt-Free Dyeing by Adjusting Fiber Crystallinity through Alcohol-Water-NaOH Pretreatment

Double-Temperature Cationic Modification Process For Uniform Reactive Dyeing Of Cotton Fabrics

Reactive Pad-Steam Dyeing of Cotton Fabric Modified with Cationic P(St-BA-VBT) Nanospheres

Cleaner cationization of cotton fabrics by reusing modification bath for salt-free reactive dyeing

Non-reactive Modification on Cotton and Its Application in Natural Dyeing

Sustainable dyeing of chemically modified cotton fabric with reactive dyes in acidic condition

Salt-free dyeing of cotton fabric and adsorption of reactive dyes in non-aqueous dyeing system: equilibrium, kinetics, and thermodynamics

Salt-Free Dyeing of Modified Cotton through Graft Polymerization with Highly Enhanced Dye Fixation and Good Strength Properties

Solvent assisted reactive dyeing of cotton with high exhaustion in the absence of salt

Dyeing Property and Adsorption Kinetics of Reactive Dyes for Cotton Textiles in Salt-Free Non-Aqueous Dyeing Systems

Studies on Crosslinking Dyeing of A Series of Crosslinking Dyes by A Crosslinker

To enhance the dyeability of cotton fiber with the application of reactive dyes by using chitosan

Clean dyeing of cotton fabrics by cross-linking reactive dyes with fiber macromolecular chains

Application of Cationic Modification Agent to Dyeing of Cotton with Natural Dyes

Sustainable Reactive Dyeing of Cotton Fabric in Green Non-Aqueous Medium: A Density Function Theory (DFT) Modeling Study

Regulating the surface charge and reactivity of cellulose through quaternized modification to achieve salt-free reactive dyeing process