Abstract:As two-dimensional (2D) nanomaterials with high photothermal conversion performance, MXenes have great potential for applications in photothermal-assisted crude oil recovery. In this study, MXene nanosheets modified a lignin-based polyurethane foam obtained with solar-to-heat conversion properties for heavy oil recovery. The adsorbent achieved a high solar absorption rate (>95%), and its surface maximum temperature reached up to 83.5 °C owing to the great solar-to-heat effect of MXenes. Due to the superb dispersibility of MXenes in polyol, the resulting bio-based foam adsorbent had a high thermal conductivity. Moreover, with the increase of temperature, the viscosity of the heavy crude oil decreases, which enables the adsorbent to adsorb more than seven times (7.6 ± 0.2 g/g) its weight of crude oil under 1 sun illumination (1.00 kW/m2) in 4 min. In addition, Ti3C2T x MXene nanosheets containing lignin-based adsorbents readily degraded in alkaline solutions (degradation efficiency > 93%, in a methanol/0.5 mol/L NaOH aqueous solution mixture (1:1, v/v) for 8 h at 60 °C). The molecular dynamics simulation revealed that lignin had lower interaction energy with the solvent solutions when methanol was present, allowing the lignin molecules to unfold and make more contact with the solvent molecules. As a result, the β-O-4 bond of lignin is more likely to be exposed to accelerate the degradation process. The solid residues of degradation were only titanium dioxide (TiO2) nanoparticles, which were harmless to the environment. With their excellent rapid heavy oil removal performance, degradability, and environmental friendliness, these bio-based adsorbents pinpoint a promising solution to clean up high-viscous crude oil spills.

Decomposition of crude oil absorbed into expanded graphite/TiO2 /NiO composites

Effect of TiO2 Doping Technique on Decomposition of Crude Oil Absorbed into Expanded Graphite

Sorption and decomposition of crude oil using exfoliated graphite/ZnO composites

Preparation and Characterization of Expanded Graphite with TiO<sub>2</sub> Composites

Preparation of the EG/TiO<sub>2</sub> Composites in the Method of Impregnation

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Simultaneous treatment of oil and dye-contaminated water by a novel composite

Synthesis of Expanded Graphite-Titanium Oxide Composite and Its Photocatalytic Performance

Preparation of Expanded Graphite-based Carbon/Carbon Composites and Its Adsorption Properties on Phenol

Exfoliated graphite blocks with resilience prepared by room temperature exfoliation and their application for oil-water separation

Degradation of Trace Oil by Nano-Tio2 Loaded on Hollow Float Beads

Preparation of Monolithic Tio2 Aerogel Via Ambient Drying and Photocatalytic Degradation of Oily Wastewater

Studies of Exfoliated Graphite (EG) for Heavy Oil Sorption

An Expanded Graphite Used as Oil Adsorbent Prepared with an Alternative Green Route Based on the Classical Hummer Method

Deep oxidative desulfurization of gas oil by iron(III)-substituted polyoxometalate immobilized on nickel(II) oxide, ((n-C4H9)4N)4H[PW11FeO39]@NiO, as an efficient nanocatalyst

STUDY ON PYROLYSIS OF HEAVY FRACTIONS OF BIO-OIL BY USING TG-FTIR ANALYSIS

Mechanism of catalytic ozonation in expanded graphite aqueous suspension for the degradation of organic acids

Degradable Ti 3 C 2 T x MXene Nanosheets Containing a Lignin Polyurethane Photothermal Foam (LPUF) for Rapid Crude Oil Cleanup

PHOTOCATALYTIC DECOMPOSITION OF TOLUENE BY TiO2FILM AS PHOTOCATALYST

Photocatalytic Degradation of Oil Film Floating on Water by Tio2 Immobilized on Expanded Perlite

Characterization of the Coke in the Coprocessing of Bio‐oil with Paraffin Oil