Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Dynamic analysis of the reheat-stop-valve mechanism with revolute clearance joint in consideration of thermal effect

Simulation and analysis of dynamic heat transfer inside a cryogenic valve under cryogenic test

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Numerical Simulation and Structure Improvement of Double Throttling in A High Parameter Pressure Reducing Valve

FLUID DYNAMICS AND CONTACT STRESS ON HARD SEALING SURFACE ANALYSIS OF LNG CRYOGENIC BALL VALVE

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Valve Dynamic Characteristic and Stress Analysis of Reciprocating Compressor Under Stepless Capacity Regulation

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Effects of Valve Disc on Flow Characteristics Inside a Swing Check Valve During Opening and Closing Processes

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Research on Fluid Dynamics and Thermal Characteristics in Hydraulic Valves by Thermal-Fluid-Solid Coupling Method

Parametric Analysis on Throttling Components of Multi-Stage High Pressure Reducing Valve

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Experimental and Modeling Investigation on Dynamic Response of Sticky Control Valves

Virtual design of rigidity for valve train system in internal combustion engine

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve