Abstract:Bioretention has been widely used in China for the purpose of sponge city construction. In subtropical climate areas, the performance of bioretention cell under condition of low infiltration underlying soil and heavy storms is still poorly understood. This study aimed to assess the effects of low infiltration underlying soil and precipitation characteristics on the hydraulic performance of a bioretention cell using the Storm Water Management Model (SWMM). The hydraulic performance of a bioretention cell were investigated under a Typical year rainfall event (P(total) (total precipitation) = 1299.2 mm) and seven heavy storms (i.e., Ptotal range from 53.1 mm to 287.3 mm), at different SF(i) (seepage rates of the underlying soil) (i.e., range from 2.5 mm/h to 15 mm/h). Then, sensitivity of the optimal design to the different design parameters, including the hydraulic conductivity of soil medium layer and the berm height of surface layer, was examined. The results show that the increase in SF(i) was effective in increasing the ARVR(i) (annual runoff volume reduction) and RVR(i) (runoff volume reduction), while little effective in increasing PFR(i) (peak flow reduction). Moreover, the ARVR(i) could meet the designed goal of 70% when the SF(i) was more than 7.5 mm/h. For RVR(i), the key variable of precipitation characteristic changes from Ptotal to P4h(max) (maximum precipitation in 4 h) as SF(i) increases, while P4h(max) remains as the key variable for PFR(i) all the time. The sensitivity studies demonstrate that the hydraulic conductivity is more effective in increasing PFR(i) than the berm height. For the bioretention cell under condition of low infiltration underlying soil and heavy storms, in order to simultaneously achieve expected reduction goal of both peak flow and runoff volume, and make the best comprehensive performance of bioretention cell, it requires not only a maintenance action to increase the hydraulic conductivity of soil medium layer, but also a drain pipe to be added in the storage layer, and meanwhile other LID practices should be combined.

Hydrological Effect of Detention Ponds Based on SWMM

STUDY ON EFFECTS OF STORM-WATER DETENTION FACILITIES IN AN URBANIZED WATERSHED USING A DISTRIBUTED MODEL

Impact and analysis of urban water system connectivity project on regional water environment based on Storm Water Management Model (SWMM)

Hydrological Effect Assessment of Low Impact Development for Urbanized Area Based on SWMM

Assessing the effectiveness of a residential-scale detention tank operated in a multi-objective approach using SWMM

Systematic Application of Sponge City Facilities at Community Scale Based on SWMM

SWMM Simulationbased Analysis on Rainfall Runoff and Water Quality Within Urban Inland River Area

Improving detention ponds for effective stormwater management and water quality enhancement under future climate change: a simulation study using the PCSWMM model

Urban Pluvial Flood Modeling by Coupling Raster-Based Two-Dimensional Hydrodynamic Model and SWMM

Urban HydroConnect: Harnessing SWMM for Dynamic Waterway Management Assessment

Stochastic Analysis of Storm Water Quality Control Detention Ponds

Analysis of Detention Ponds for Storm Water Quality Control

Layout Effects and Optimization of Runoff Storage and Filtration Facilities Based on SWMM Simulation in a Demonstration Area

Hydrological Effect Analysis of Low Impact Development under Different Rainfall Conditions

Impacts of Sunken Lawn and Storage Pond on Urban Flood

Simulative Analysis on Storm Flood in Typical Urban Region of Beijing Based on SWMM

SWMM-Based Assessment of the Improvement of Hydrodynamic Conditions of Urban Water System Connectivity

A case in subtropical climate city: Assessing the bioretention hydraulic performance on storm in response to poor permeability soil

The hydrological effect and uncertainty assessment by runoff indicators based on SWMM for various LID facilities

Quantitative analysis of stormwater management strategies in the process of watershed urbanization

Introduction of basic principle and application prospect for SWMM