Abstract:An increasing number of buried oil-gas pipelines are generated in recent years and defects occur with higher probability in their long-running process. This work proposes an electromagnetic ultrasonic guided wave (EUGW) long-term monitoring scheme for buried oil`-gas pipelines and a data difference adaptive extraction method for the monitoring data. The T (0,1) mode guided wave is selected because of its non-dispersive characteristic. For the electromagnetic acoustic transducer (EMAT), a circumferentially magnetized nickel strap is bonded on the pipe to provide the bias magnetic field and the excitation coils are winded on the nickel strap to provide the dynamic magnetic field. A detection stub is planted on the ground and the connector of buried coils is installed in the stub. The difference array is constructed and adaptive gain and attenuation are performed in the data difference adaptive extraction method. The EUGW long-term monitoring scheme is on-site applied for buried oil pipes in Jinan city, Shandong province, China. The EMAT is installed and buried with the pipe, and the periodical detection is conducted from December 2015 till now, once per month. A pit is found and verified by excavation at the distance 9.25 m from the buried EMAT on the flow direction. On-site detection results show that the data extraction method can dramatically improve the signal to noise ratio of the monitoring data and accurately extract the difference and variation of the pipe's structural health condition that occurred in the long-term service. The EUGW long-term monitoring scheme is proved to be a feasible method with prosperous prospect for the structural health monitoring of buried oil-gas pipelines.

Development of Oil and Gas Pipeline Crack Detector Based on EMAT

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

Oil and Gas Pipeline EMAT Data Compression Algorithm

Crack-Inspection Device Based on Electromagnetic Acoustic Angled Shear Vertical Wave for Thick-Wall Pipelines

NONDESTRUCTIVE TESTING TECHNIQUE FOR CRACKS IN LONG-DISTANCE NATURAL GAS PIPELINES

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers

Development of the Ultrasonic Guided Wave Detecting System for Pipeline Based on the Magnetostrictive Effect

A Deep Learning-Based Ultrasonic Pattern Recognition Method for Inspecting Girth Weld Cracking of Gas Pipeline

EMD of EMAT NDT in X70 Pipeline Weld Defects

Internal and External Pipe Defect Characterization via High-Frequency Lamb Waves Generated by Unidirectional EMAT

An Adaptive Compression Algorithm for Pipeline Emat Inspection Data

In-line inspection technology of oil and gas long-distance pipeline based on alternating current field measurement

Excitation power design base on series resonant electromagnetic ultrasonic sensor for pipeline NDT

Multiple Cracks Detection in Pipeline Using Damage Index Matrix Based on Piezoceramic Transducer-Enabled Stress Wave Propagation

Electromagnetic Ultrasonic Guided Wave Long-Term Monitoring and Data Difference Adaptive Extraction Method for Buried Oil-Gas Pipelines

A Flexible Film Type EMAT for Inspection of Small Diameter Pipe

Mechanism Hybrid EMAT and Eddy Current Sensing Detection for Surface and Internal Defects NDT

Differential Electromagnetic Acoustic Probes for Quantitative Detection of Pipeline Cracks

Magnetostrictive Guided Wave Flaw Detection System for Pipeline

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Electromagnetic Stimulation of the Acoustic Emission for Fatigue Crack Detection of the Sheet Metal