Output Characteristics of a Cataphoresis He–Sr+ Recombination Laser

Y. J. Wang,B. L. Pan,L. Chen,B. N. Mao

DOI: https://doi.org/10.1016/j.optcom.2008.07.054

IF: 2.4

2008-01-01

Optics Communications

Abstract:A cataphoresis discharge tube of 7mm inner diameter and 38cm active length was designed and made for the He–Sr+ laser. The cataphoretic input of uniform distribution of strontium vapor concentrations along the active region was realized by the cataphoresis effect and the slow flowing (0.5nl/h) of helium buffer gas. The strontium ionic recombination laser at 430.5nm and the R–M transition laser at 1.03μm were obtained with the modified Blumlein circuit by high-frequency longitudinal pulsed discharge. The laser components are concentrated on the 430.5nm wavelength. Dependences of working parameters such as the pulse frequency, the supply voltage, and the helium pressure on laser output characteristics were measured and discussed. The maximum laser output power of 819mW and specific power of 56mW/cm3 were obtained, respectively.